• Journal of Microbiology and Biotechnology
• /
• v.28 no.9
• /
• pp.1536-1541
• /
• 2018

A yellowish, flexirubin-pigment-producing strain $I3-3^T$ was isolated from river water in Iksan, the Republic of Korea. The strain was gram-negative, aerobic, non-motile, showed catalase and oxidase activities, and could grow at a temperature range of $10-35^{\circ}C$, pH 5.0-10 and 0-2.0% (w/v) of NaCl. The major fatty acids were iso-$C_{15:0}$, iso-$C_{17:0}$ 3-OH and summed feature 3 (comprising $C_{16:1}{\omega}7c$ and/or $C_{16:1}{\omega}6c$). The isolate contained phosphatidylethanolamine, one aminolipid, and two unidentified lipids as the major polar lipids. Menaquinone-6 (MK6) was the major respiratory quinone. The G+C content of the genomic DNA of strain $I3-3^T$ was 35.6%. Comparison of the 16S rRNA gene sequence with the sequences of the closely related type strains showed highest sequence similarity of 96.95% and 96.93% to Flavobacterium nitrogenifigens $NXU-44^T$ and Flavobacterium compostarboris $15C3^T$, respectively. Based on phenotypic and phylogenetic distinctiveness, strain $I3-3^T$ is considered as a member of novel species within the genus Flavobacterium, for which Flavobacterium amnigenum sp. nov. is proposed. The type strain is $I3-3^T$ (=KCTC $52884^T$ =NBRC $112871^T$).

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1995.11a
• /
• pp.109-112
• /
• 1995

CuInS$_2$thin film was prepared by heat treatment at vacuum 10$\^$-3/ Torr of S/In/Cu stacked layer which was deposited by sequential. And so, the polycrystalline CuInS$_2$with chalcopyrite structure was well made at heat treatment temperature of 250$^{\circ}C$ and heat treatment time of 60 min. Single phase of CuInS$_2$was formed from Cu/In composition ratio of 0.84 to 1.3. p conduction type of CuInS$_2$thin film was appeared from Cu/In competition ratio of 0.99. The highest resistivity of CuInS$_2$with p type was 1.608${\times}$10$^2$$\Omega$cm at Cu/In composition ratio of 0.99 and The lowest resistivity was 5.587${\times}$10$\^$-2/$\Omega$cm at Cu/In composition ratio of 1.3.

• Proceedings of the IEEK Conference
• /
• 2002.06b
• /
• pp.57-60
• /
• 2002

In this paper, transmission lines with low and high characteristic impedance (Z$_{0}$) are fabricated and analyzed. The transmission lines are fabricated on the benzo-cyclo-butene (BCB) films of a low dielectric constant. For the low Z$_{0}$, two types of coplanar waveguide (CPW) structures are fabricated, which include bottom-ground and double-ground type. Measurement shows that Z$_{0}$ values for each CPW type are 7.3 and 9.4$\Omega$, respectively, at a signal line width of 100 #m. Whit the ratio between the spacing of bottom-ground and the signal line with becomes greater than 2.5, the Z$_{0}$ is nearly saturated. In addition, thin film microstrip lines fabricated using the BCB insertion layers show very low Z$_{0}$ of 25.5$\Omega$, and this impedance is ~64 % of the values obtained from the BCB-based CPW structures of the same line width. Measurement result of CPW on BCB layer is 100.5 Ω.s 100.5 Ω.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.11
• /
• pp.1007-1013
• /
• 2005

In this study, a step-down piezoelectric transformer was fabricated to utilize as an adapter for charging batteries of mobile electronic appliances. The ceramic part of the transformer is $Pb[(Mn_{1/3}Sb_{2/3})_{_0.05}Zr_{0.475}Ti_{0.475}]O_3$ with mechanical quality factor of 1600, electromechanical coupling coefficient $59\%$, and piezoelectric constant $d_{33}$ 1300, which can be utilized as a piezoelectric transformer. A simply fabricated disk-typed test pattern of diameter 28 mm and thickness 2 mm was used to characterize output voltage, step-down ratio as a function of electrode area with the input remained constant, and power, efficiency as a function of input voltage, and temperature-dependent electric characteristics were evaluated. The sample APT1 showed the best properties. The highest admittance, effective electromechanical coupling coefficient and an appropriate mechanical quality factor were obtained at the sample with the input/output area ratio of 1:1.5 at the common electrode, and the condition of 20 $V_{rms}$, $50\;\Omega$ made the maximum efficiency of $95\%$. The temperature was increased by 14.7'E as the input voltage was increased for $50\;V_{rms},\;50\;\Omega$.

• Journal of the Korean Applied Science and Technology
• /
• v.31 no.1
• /
• pp.1-6
• /
• 2014

Gemini type of cationic surfactant, namely ${\alpha},{\omega}$-alkane-bis(N-lauroyloxyethyl-N,N-dimethyl)-diammonium bromide was synthesized and confirmed by FT-IR and $^1H$-NMR spectroscopy. Their inhibition effect on corrosion of mild steel in 1 M HCl solution was tested by weight loss method. Surface tensions were measured by surface tensiometer Sigma 70. Their c.m.c. values evaluated by surface tension method was $4.01{\times}10^{-5}{\sim}4.99{\times}10^{-5}mol/L$. The Krafft point of the these surfactants were < $0^{\circ}C$. The emulsifying properties of synthesized cationic gemini surfactants and sodium dodecyl sulfate (SDS), tetradecyl trimethyl ammonium bromide (TTAB) was investigated. Of these, ${\alpha},{\omega}$-alkane-bis(N-lauroyloxyethyl-N,N-dimethyl)-diammonium bromide has been confirmed as a good emulsifier. The inhibition efficiency increases by increasing cationic gemini surfactant concentration. As a result, these surfactants are expected to be applied as corrosion inhibitors.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.29A no.9
• /
• pp.36-45
• /
• 1992

The Modified Multi-Quantum Well(MMQWAl) structures have been grown by Mental-Organic chemical Vapor Deposition(MOCVD) method and stripe type MMQW laser diodes have been investigated. In the case of GaAs/AlGaAs superlattice and quantum well growth by MOCVD, the periodicity, interface abruptess, Al compositional uniformity and layer thickness have been confirmed though the shallow angle lapping technique, double crystal x-ray diffractometry (DCXD) and photoluminescence (PL) measurement. stripe-type MMQW laser diodes have been fabricated using the process technology of photolithography, chemical etching, ohmic contact, back side removing and cleaving. As the result of the electrical and opticalmeasurement of these laser diodes, we have achieved the series resistance of $1[\Omega}~2{\Omega}$ by current-voltage measurements, the threshold current of 200-300mA by currnt-light measurements and the lasing wavelength of 8000-8400$\AA$ by lasing spectrum measurements.

• Preventive Nutrition and Food Science
• /
• v.19 no.4
• /
• pp.358-362
• /
• 2014

Flow and dynamic rheological properties of hot thickened soups for consumption by the elderly people with swallowing difficulty (dysphagia) were investigated at a serving temperature of $60^{\circ}C$. In this study, sea mustard soup (SMS) and dried pollock soup (DPS), which have been widely known as favorable hot soups provided in a domestic hospitals and nursing homes for dysphagic patients, were thickened with four commercial xanthan gum (XG)-based food thickeners (coded A~D) marketed in Korea. Thickened soups prepared with different thickeners showed high shear-thinning flow behaviors (n=0.15~0.21). Apparent viscosity (${\eta}_{a,50}$), consistency index (K), storage modulus (G'), and loss modulus (G") demonstrated differences in rheological behaviors between the XG-based thickeners. The magnitudes of (G') were much higher than those of (G") over the entire range of frequency (${\omega}$) with the high dependence on ${\omega}$, showing the rheological behavior similar to a weak gel. In general, all rheological parameter values of thickened DPS samples were higher when compared to the thickened SMS samples. These results indicate that flow and dynamic rheological properties of hot thickened soups containing commercial XG-based thickeners are strongly dependent on the type of thickener and soup.

• Journal of information and communication convergence engineering
• /
• v.11 no.3
• /
• pp.147-152
• /
• 2013

A novel balun being the structure of a Wilkinson power divider is suggested and fabricated. One of the power dividing paths in the suggested balun uses a conventional ${\lambda}/4$ transmission line for $-90^{\circ}$ phase shifting, and the other path uses a composite right/left-handed -${\lambda}/4$ transmission line for $+90^{\circ}$ phase shifting with four series capacitors and three parallel inductors. In addition, the suggested balun uses two $50-{\Omega}$ resistors and a conventional $50-{\Omega}$ transmission line of ${\lambda}/2$ electrical length between the two output ports, achieving good isolation and reflection values of two balanced ports. The suggested balun is simulated by the advanced design system simulation program and fabricated on TLX-9 20-mil substrate. The fabricated balun has a very good values of $S_{11}$ = -27.46 dB, $S_{21}$ = -3.40 dB, and $S_{31}$ = -3.28 dB, a phase difference of $-179.5^{\circ}$, a magnitude difference of 0.12 dB, and a delay difference of 0.1 ns, with $S_{22}$ = -36.28 dB, $S_{33}$ = -27.19 dB, and $S_{32}$ = -25.2 dB at 1 GHz, respectively.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.7
• /
• pp.557-563
• /
• 2003

SiC has been an useful material for the high voltage, high temperature, and high frequency devices, however, the required high process temperature to activate the implanted p-type dopants has hindered further developments. In this study, we report, for the first time, on the laser activation of implanted Al and non-alloyed Mo ohmic contacts and its application to MOSFET fabrication. The contact and sheet resistance measured from CTLM patterns have decreased by increasing laser power, and the lowest values are 3.9 $K\Omega$/$\square$ and 1.3 $\times$ 10$^{-3}$ $\Omega$-cm$^2$, respectively, at the power density of 1.45 J/cm$^2$ The n-MOSFETs fabricated on laser activated p-well exhibit well-behaved I-V characteristics and threshold voltage reduction by reverse body voltage. These results prove that the laser process for implant activation is an alternative low temperature technology applicable to SiC devices.

• Elastomers and Composites
• /
• v.40 no.1
• /
• pp.37-44
• /
• 2005

Novel polyurethanes containing no mesogenic unit were synthesized by the polyaddition reaction of para-type diisocyanates such as 2,5-tolylene diisocyanate (2,5-TDI) or 1,4-phenylene diisocyanate (1,4-PDI) with 2,6-bis(${\omega}$-hydroxyalkoxy)naphthalene (BHNm; m= 5, 6, 8, 11). Intrinsic viscosities of the polymers were in the range of 0.28-0.43 dL/g. The thermal properties of these polymers were studied by differential scanning calorimetry and polarizing microscopy. Polyurethanes prepared from BHNm and 2,5-TDI haying methyl substituent on the phenylene unit exhibited monotropic liquid crystallinity. However, in the series of polyurethanes prepared from 1,4-PDI and BHNm, no explicit mesomorphic behavior was observed by differential scanning calorimetry and polarizing microscopy.