• Steel and Composite Structures
• /
• v.13 no.6
• /
• pp.501-519
• /
• 2012

As an alternative to current conventional force-based assessment methods, the energy-based seismic performance of a code-designed 20-storey high-rise steel building is evaluated in this paper. Using 3D nonlinear dynamic time-history method with consideration of additional material damping effect, the influences of different restoring force models and P-${\Delta}/{\delta}$ effects on energy components are investigated. By combining equivalent viscous damping and hysteretic damping ratios of the structure subjected to strong ground motions, a new damping model, which is amplitude-dependent, is discussed in detail. According to the analytical results, all energy components are affected to various extents by P-${\Delta}/{\delta}$ effects and a difference of less than 10% is observed; the energy values of the structure without consideration of P-${\Delta}/{\delta}$ effects are larger, while the restoring force models have a minor effect on seismic input energy with a difference of less than 5%, but they have a certain effect on both viscous damping energy and hysteretic energy with a difference of about 5~15%. The paper shows that the use of the hysteretic energy at its ultimate state as a seismic design parameter has more advantages than seismic input energy since it presents a more stable value. The total damping ratio of a structure consists of viscous damping ratio and hysteretic damping ratio and it is found that the equivalent viscous damping ratio is a constant for the structure, while the equivalent hysteretic damping ratio approximately increases linearly with structural response in elasto-plastic stage.

• Metals and materials international
• /
• v.24 no.6
• /
• pp.1256-1261
• /
• 2018

Both thermoplastic formability and electrical conductivity of Al-Ni-Y metallic glass with 12 different compositions have been investigated in the present study with an aim to apply as a functional material, i.e. as a binder of Ag powders in Ag paste for silicon solar cell. The thermoplastic formability is basically influenced by thermal stability and fragility of supercooled liquid which can be reflected by the temperature range for the supercooled liquid region (${\Delta}T_x$) and the difference in specific heat between the frozen glass state and the supercooled liquid state (${\Delta}C_p$). The measured ${\Delta}T_x$ and ${\Delta}C_p$ values show a strong composition dependence. However, the composition showing the highest ${\Delta}T_x$ and ${\Delta}C_p$ does not correspond to the composition with the highest amount of Ni and Y. It is considered that higher ${\Delta}T_x$ and ${\Delta}C_p$ may be related to enhancement of icosahedral SRO near $T_g$ during cooling. On the other hand, electrical resistivity varies with the change of Al contents as well as with the change of the volume fraction of each phase after crystallization. The composition range with the optimum combination of thermoplastic formability and electrical conductivity in Al-Ni-Y system located inside the composition triangle whose vertices compositions are $Al_{87}Ni_3Y_{10}$, $Al_{85}Ni_5Y_{10}$, and $Al_{86}Ni_5Y_9$.

• Journal of Life Science
• /
• v.26 no.12
• /
• pp.1376-1382
• /
• 2016

Xylitol is widely used in the food and medical industry. It is produced by the reduction of xylose (lignocellulosic biomass) in the Saccharomyces cerevisiae strain, which is considered genetically safe. In this study, the expression system of the GRE3 (YHR104W) gene that encodes xylose reductase was constructed to efficiently produce xylitol in the S. cerevisiae strain, and the secretory production of xylose reductase was investigated. To select a suitable promoter for the expression of the GRE3 gene, pGMF-GRE3 and pAMF-GRE3 plasmid with GAL10 promoter and ADH1 promoter, respectively, were constructed. The mating factor ${\alpha}$ ($MF{\alpha}$) signal sequence was also connected to each promoter for secretory production. Each plasmid was transformed into S. cerevisiae $SEY2102{\Delta}trp1$, and $SEY2102{\Delta}trp1$/pGMF- GRE3 and $SEY2102{\Delta}trp1$/pAMF-GRE3 transformants were selected. In the $SEY2102{\Delta}trp1$/pGMF-GRE3 strain, the total activity of xylose reductase reached 0.34 unit/mg-protein when NADPH was used as a cofactor; this activity was 1.5 fold higher than that in $SEY2102{\Delta}trp1$/pAMF-GRE3 with ADH1 as the promoter. The secretion efficiency was 91% in both strains, indicating that most of the recombinant xylose reductase was efficiently secreted in the extracellular fraction. In a baffled flask culture of the $SEY2102{\Delta}trp1$/pGMF-GRE3 strain, 12.1 g/l of xylitol was produced from 20 g/l of xylose, and ~83% of the consumed xylose was reduced to xylitol.

• Bulletin of the Korean Mathematical Society
• /
• v.51 no.6
• /
• pp.1829-1839
• /
• 2014

Let (${\Omega}$, $\mathcal{S}$, ${\mu}$) be a probabilistic measure space, ${\varepsilon}{\in}\mathbb{R}$, ${\delta}{\geq}0$, p > 0 be given numbers and let $P{\subset}\mathbb{R}$ be an open interval. We consider a class of functions $f:P{\rightarrow}\mathbb{R}$, satisfying the inequality $$f(EX){\leq}E(f{\circ}X)+{\varepsilon}E({\mid}X-EX{\mid}^p)+{\delta}$$ for each $\mathcal{S}$-measurable simple function $X:{\Omega}{\rightarrow}P$. We show that if additionally the set of values of ${\mu}$ is equal to [0, 1] then $f:P{\rightarrow}\mathbb{R}$ satisfies the above condition if and only if $$f(tx+(1-t)y){\leq}tf(x)+(1-t)f(y)+{\varepsilon}[(1-t)^pt+t^p(1-t)]{\mid}x-y{\mid}^p+{\delta}$$ for $x,y{\in}P$, $t{\in}[0,1]$. We also prove some basic properties of such functions, e.g. the existence of subdifferentials, Hermite-Hadamard inequality.

• Journal of the Korean Mathematical Society
• /
• v.47 no.1
• /
• pp.135-163
• /
• 2010

Motivated by [Science in China (Ser. A Mathematics) 36 (2006), no. 7, 721?732], this article deals with the following discrete type BVP $\LARGE\left\{{{\;{\Delta}[{\phi}({\Delta}x(n))]\;+\;f(n,\;x(n\;+\;1),{\Delta}x(n),{\Delta}x(n + 1))\;=\;0,\;n\;{\in}\;[0,N],}}\\{\;{x(0)-{\sum}^m_{i=1}{\alpha}_ix(n_i) = A,}}\\{\;{x(N+2)-\;{\sum}^m_{i=1}{\beta}_ix(n_i)\;=\;B.}}\right.$ The sufficient conditions to guarantee the existence of at least three positive solutions of the above multi-point boundary value problem are established by using a new fixed point theorem obtained in [5]. An example is presented to illustrate the main result. It is the purpose of this paper to show that the approach to get positive solutions of BVPs by using multifixed-point theorems can be extended to treat nonhomogeneous BVPs. The emphasis is put on the nonlinear term f involved with the first order delta operator ${\Delta}$x(n).

• Bulletin of the Korean Chemical Society
• /
• v.6 no.5
• /
• pp.259-263
• /
• 1985

Rate Constants for the solvolysis of p-methylbenzyl chloride in various ethanol-water mixtures were studied at 30 and $40^{\circ}C$ under various pressures up to 1600 bar. The rates of reaction were increased with increasing temperature and pressure, and decreased with increasing solvent composition of ethanol mole fraction. From the rate constants, the values of the activation parameters (${\Delta}V^{\neq},{\Delta}{\beta}^{\neq},{\Delta}H^{\neq}\;and\;{\Delta}S^{\neq}$) were evaluated. The values of ${\Delta}V^{\neq}\;and\;{\Delta}{\beta}^{\neq}$ exhibit the extremum behavior at about 0.30 mole fraction of ethanol. This behavior is discussed in terms of solvent structure variation (electrostriction). From the relation between the reaction rate and the dielectric constant of solvent or the number of water molecule participated in the transition state, it could be postulated that the reaction proceeds through $S_N1$ mechanism.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.3
• /
• pp.257-265
• /
• 2009

Statement of problem & Purpose: To study the effect of different fluoridation methods after in-office bleaching on the color of teeth during severe staining with coffee. Material and methods: 44 specimens were randomly divided into four groups. Group 1 (no bleaching, no fluoride, coffee) was served as control for the influence of coffee on the color of untreated teeth. Group 2, 3 and 4 were undergone bleaching with 35% $H_2O_2$ for 30 minutes a day on 3 consecutive days. Group 2 was remained without fluoridation. Group 3 and 4 were fluoridated for 1 hour with either Cavity shield$^{(R)}$ or pH 7 Gel$^{(R)}$. All of groups were immersed in coffee solution for 7 days. Color determination was accomplished using the spectrophotometer (VITA Easyshade$^{(R)}$). Results: ${\Delta}L$ and ${\Delta}h$ increased, whereas ${\Delta}C$ decreased in the bleached groups. Pairwise comparisons with Tukey's HSD showed that there were statistically significant differences for ${\Delta}L$ and ${\Delta}h$ between the bleached groups and the non-bleached group (P < .05). ${\Delta}L$ and ${\Delta}h$ decreased continuously, while ${\Delta}C$ showed an increase after a decrease in all of groups during immersion in coffee solution. After immersion in coffee solution for 7 days there were no statistically significant differences for ${\Delta}L$, ${\Delta}C$ and ${\Delta}h$ between the groups (P > .05). Also there were no statistically significant differences for ${\Delta}L$, ${\Delta}C$ and ${\Delta}h$ between the group 3 treated with Cavity shield. and the group 4 treated with pH 7 Gel. (P > .05). Conclusion: It was concluded that fluoridation was not beneficial to the prevention of extrinsic stains after bleaching.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.39 no.3
• /
• pp.257-266
• /
• 2012

The objective of this in vitro study was to monitor the amount of remineralization of decalcified enamel according to the number of fluoride varnish application using quantitative light-induced fluorescence-D and polarizing microscope. Artificial white lesion induced on the sound 72 teeth, $CavityShield^{TM}$ (Group I), $FluroDose^{TM}$ (Group II) and $Flor-Opal^{(R)}$ Varnish (Group III) were applied 1, 2 or 3 times every two weeks. The following results was obtained: 1. In group I, II and III, ${\Delta}L$ were increased. From regression analysis of ${\Delta}L$ by the number of application, the equation was y = 3.878x + 90.612 in group I, y = 3.133x + 37.168 in group II, and y = 3.509x + 82.322 in group III(p < 0.05). 2. In group I, II and III, ${\Delta}D$ were decreased. From regression analysis of ${\Delta}D$ by the number of application, the equation was y = -2.336x + 107.235 in group I, y = -2.158x + 101.620 in group II, and y = -1.940x + 94.806 in group III(p < 0.05). 3. The Pearson correlation value between the ${\Delta}L$ and ${\Delta}D$ was -0.673 in group I, -0.574 in group II, and -0.431 in group III(p < 0.05).

• Journal of Dental Rehabilitation and Applied Science
• /
• v.34 no.3
• /
• pp.157-166
• /
• 2018

Purpose: This study was aimed to compare the consistency between the custom abutment design and the output in two CAD software programs. Materials and Methods: Customized abutments were designed by using 3Shape Dental System CAD software and Delta9 CAD software on a plaster model with implants (CRM STL file). After milling of the designed abutments, the abutments were scanned with a contact method scanner (Test STL file). We overlaid the Test STL file with each CRM STL file by using inspection software, and then compared the milling reproducibility by measuring the output error of the specimens from each CAD software program. Results: The Delta9 showed better milling reproducibility than 3Shape when comparing the milling errors obtained with a full scan of all specimens (P < .05) and also when comparing the axial wall region specifically according to the axial angle. With 0.9 mm marginal radius, the Delta9 showed better consistency between the design and the output than 3Shape (P < .05). While, anti-rotation form had no significant difference in error between the two systems. When cumulative errors were compared, the Delta9 showed better milling reproducibility in almost cases (P < .05). Conclusion: Delta9 showed a significantly smaller error for most of the abutment design options. This means that it is possible to facilitate generation of printouts with reliable reproducibility and high precision with respect to the planned design.

• Journal of Aquaculture
• /
• v.9 no.1
• /
• pp.101-106
• /
• 1996

Gynogenetic males induced from sex reversed female (${\Delta}XY$) were crossed with normal female (XX) for analysing their genotypes. The fish tested produced a high percentage of male progenies (93.3 to $100\%$) and were considered as supermales (YY). Superfemales (${\Delta}YY$) were also produced by combination of sex reversal and chromosome manipulation techniques. Superfemale fish can be produced approximetly $90\%$ of male when the fish were crossed with normal male. Chi-square values against an expected 1 : 1 (male : female) ratio were highly significant for both YY males${\times}$ normal females (P<0.01 or P<0.001) and ${\Delta}YY$ females${\times}$normal males (P<0.005 or P<0.001). All male progenies were produced consistently when crossed supermales (YY) with superfemales (${\Delta}YY$).