• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.264-264
• /
• 2010

Single-walled carbon nanotubes (SWCNTs) were grown on a Si wafer by using thermal chemical vapor deposition (t-CVD). We investigated the effect of the catalyst deposition rate on the types of CNTs grown on the substrate. In general, smaller islands of catalyst occur by agglomeration of a catalyst layer upon annealing as the catalyst layer becomes thinner, which results in the growth of CNTs with smaller diameters. For the same thickness of catalyst, a slower deposition rate will cause a more uniformly thin catalyst layer, which will be agglomerated during annealing, producing smaller catalyst islands. Thus, we can expect that the smaller-diameter CNTs will grow on the catalyst deposited with a lower rate even for the same thickness of catalyst. The 0.5-nm-thick Fe served as a catalyst, underneath which Al was coated as a catalyst support as well as a diffusion barrier on the Si substrate. The catalyst layers were. coated by using thermal evaporation. The deposition rates of the Al and Fe layers varied to be 90, 180 sec/nm and 70, 140 sec/nm, respectively. We prepared the four different combinations of the deposition rates of the AI and Fe layers. CNTs were synthesized for 10 min by flowing 60 sccm of Ar and 60 sccm of $H_2$ as a carrier gas and 20 sccm of $C_2H_2$ as a feedstock at 95 torr and $810^{\circ}C$. The substrates were subject to annealing for 20 sec for every case to form small catalyst islands prior to CNT growth. As-grown CNTs were characterized by using field emission scanning electron microscopy, high resolution transmission electron microscopy, Raman spectroscopy, UV-Vis NIR spectroscopy, and atomic force microscopy. The fast deposition of both the Al and Fe layers gave rise to the growth of thin multiwalled CNTs with the height of ${\sim}680\;{\mu}m$ for 10 min while the slow deposition caused the growth of ${\sim}800\;{\mu}m$ high SWCNTs. Several radial breathing mode (RBM) peaks in the Raman spectra were observed at the Raman shifts of $113.3{\sim}281.3\;cm^{-1}$, implying the presence of SWCNTs (or double-walled CNTs) with the tube diameters 2.07~0.83 nm. The Raman spectra of the as-grown SWCNTs showed very low G/D peak intensity ratios, indicating their low defect concentrations.

• Asian-Australasian Journal of Animal Sciences
• /
• 제15권1호
• /
• pp.26-33
• /
• 2002

In order to assess the effect of feeding raw or processed cotton (Gossypium) seed meal (CSM) on meat and wool production, 30 male crossbred lambs (3-4 months) of uniform body weight were assigned equally to five dietary treatments in a completely randomised design. The CSM was processed by three different methods i.e., cooking the meal at $100^{\circ}C$ for 45 minutes, treatment with 1% calcium hydroxide ($Ca(OH)_2$) for 24 h and iron treatment in the ratio of 1 part free gossypol (FG) to 0.3 parts of iron for 30 minutes. The lambs were fed isonitrogenous and isocaloric concentrate mixtures, containing 30% deoiled peanut meal (reference diet) and 40% of either raw, cooked, $Ca(OH)_2$ or iron treated CSM for 180 days. The raw and variously processed CSM replaced about 50% nitrogen of reference concentrate mixture. The concentrate mixtures were fed to meet 80% of the protein requirements (NRC, 1985) along with ad libitum chopped maize (Zea mays) hay. The slaughter weight, empty body weight and carcass weight was higher ($p{\leq}0.01$) in lambs fed cooked CSM incorporated diets, compared to diets containing deoiled peanut meal (DPNM). These parameters were not influenced by feeding diets containing either raw, $Ca(OH)_2$ or iron treated CSM in comparison DPNM diets. The carcass length, loin eye area and edible and inedible portion of carcass and the meat: bone ratio in whole carcass were also not affected by feeding CSM based diets. Among various primal cuts, the yield of legs was lower ($p{\leq}0.05$) from raw CSM fed lambs in comparison to DPNM fed lambs. The fat content in the Longissimus dorsi muscle was reduced ($p{\leq}0.05$) in lambs fed processed CSM based diets compared to those fed DPNM diet. Replacing DPNM with either raw or processed CSM based diets did not influence the sensory attributes and overall acceptability of meat. The wool yield was higher ($p{\leq}0.05$) in iron treated CSM fed lambs. The fibre length and fibre diameter were comparable among lambs on various dietary regimes. Among lambs fed variously processed CSM diets, the feed cost per kg of edible meat production was lower ($p{\leq}0.05$) on $Ca(OH)_2$ treated CSM, followed by cooked CSM diet and then on raw CSM based diets compared to DPNM diet. The CSM after 1% $Ca(OH)_2$ treatment or cooking for 45 minutes appears to be a satisfactory protein supplement in lamb diets for meat and wool production to replace at least 50% nitrogen of scarce and costly peanut meal.

• Bulletin of the Korean Chemical Society
• /
• 제35권8호
• /
• pp.2342-2348
• /
• 2014

Poly(lactic-co-glycolic acid) (PLGA) were grafted to both ends of Pluronic$^{(R)}$ F68 ($(EO)_{75}(PO)_{30}(EO)_{75}$) triblock copolymer to produce poly{(lactic acid)$_m$-co-(glycolic acid)$_n$}-b-poly(ethylene oxide)$_{75}$-b-poly(propylene oxide)$_{30}$-b-poly(ethylene oxide)$_{75}$-b-poly{(lactic acid)$_m$-co-(glycolic acid)$_n$} (PLGA-F68-PLGA) pentablock copolymers. Molecular weights of PLGA blocks were controlled and five kinds of pentablock copolymers with different PLGA block lengths were synthesized using in-situ ring-opening polymerization of D,L-lactide and glycolide with tin(II) 2-ethylhexanoate ($Sn(Oct)_2$) catalyst. PLGA-F68-PLGA pentablock copolymers were characterized by $^1H$- and $^{13}C$-NMR, GPC, and TGA. The numbers (2m, 2n) of repeating units for lactic acid and glycolic acid inside PLGA segments were obtained as (48, 17), (90, 23), (125, 40), (180, 59), and (246, 64), with $^1H$-NMR measurement. From NMR data, the resultant molecular weights were determined in the range of 12,700-29,700, which were similar to those obtained from GPC. Polydispersity index was increased in the range of 1.32-1.91 as the content of PLGA blocks increased. TG and DTG thermograms showed discrete degradation traces for PLGA and F68 blocks, which indicate the weight fractions of PLGA blocks in pentablock copolymers can be calculated by TG profile and it is possible to remove PLGA block selectively. Hydrodynamic radius and radius of gyration of pentablock copolymer micelle were obtained in the range of 46-68 nm and 31-49 nm, respectively, in very dilute (i.e. 0.005 wt %) aqueous solution of THF:$H_2O$ = 10:90 by volume at $25^{\circ}C$.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2010년도 임시총회 및 하계학술연구발표회
• /
• pp.79-79
• /
• 2010

Semimetallic bismuth (Bi) has been extensively investigated over the last decade since it exhibits very intriguing transport properties due to their highly anisotropic Fermi surface, low carrier concentration, long carrier mean free path l, and small effective carrier mass $m^*$. In particular, the great interest in Bi nanowires lies in the development of nanowire fabrication methods and the opportunity for exploring novel low-dimensional phenomena as well as practical application such as thermoelectricity[1]. In this work, we introduce a self-assembled interconnection of nanostructures produced by an on-film formation of nanowires (OFF-ON) method in order to form a highly ohmic Bi nanobridge. A Bi thin film was first deposited on a thermally oxidized Si (100) substrate at a rate of $40\;{\AA}/s$ by radio frequency (RF) sputtering at 300 K. The sputter system was kept in an ultra high vacuum (UHV) of $10^{-6}$ Torr before deposition, and sputtering was performed under an Ar gas pressure of 2m Torr for 180s. For the lateral growth of Bi nanowires, we sputtered a thin Cr (or $SiO_2$) layer on top of the Bi film. The Bi thin films were subsequently put into a custom-made vacuum furnace for thermal annealing to grow Bi nanowires by the OFF-ON method. After thermal annealing, the Bi nanowires cannot be pushed out from the topside of the Bi films due to the Cr (or $SiO_2$) layer. Instead, Bi nanowires grow laterally as a mean s of releasing the compressive stress. We fabricated a self-assembled Bi nanobridge (d=192 nm) device in-situ using OFF-ON through annealing at $250^{\circ}C$ for 10hours. From I-V measurements taken on the Bi nanobridge device, contacts to the nanobridge were found highly ohmic. The quality of the Bi nanobridge was also proved by the high MR of 123% obtained from transverse MR measurements. These results manifest the possibility of self-assembled nanowire interconnection between various nanostructures for a variety of applications and provide a simple device fabrication method to investigate transport properties on nanowires without complex patterning and etching processes.

• 한국의류학회지
• /
• 제10권3호
• /
• pp.71-81
• /
• 1986

In order to control the formaldehyde release from D.P. finished fabric, cotton fabric was padded in DMDHEU resin bath containing either $Zn(NO_3)_2$ or $MgCl_2$ catalyst and a form-aldehyde scavenger like Glycerol, Sorbitol, Formamide, Polyvinyl alcohol (PVA, n= 2000) or diols, then dried and cured. The results are as follows : 1. When Lewis acid catalyst like $Zn(NO_3)_2$ or $MgCl_2$ was added in pad bath, the fabric finished with $Zn(NO_3)_2$ catalyst released the lower formaldehyde than with $MgCl_2$. 2. When the effect of pad bath pH was examined with varying the kinds of catalyst and the scavenger, it was found that the pad bath pH influenced on the amount of formaldehyde release and the optimum pad bath pH is at 4.3. Especially, in case of finishing at pad bath pH 4.3 with adding Formamide, the amount of formaldehyde release was decreased by about $45\~$35\%$ with $Zn(NO_3)_2$, while by about $20\~$45\%$ with $MgCl_2$ catalyst. In case of varying the concentration of a scavenger (Formamide), $1\%$ concentration of a scavenger was found to be the optimum level ana the higher the curing temperature up to $180^{\circ}C$, the lesser the amount of formaldehyde release were observed. 3. When the diol was used as scavenger, the amount of formaldehyde release was decreased by about $40\~$50\%$, but the longer the intramolecular length between OH groups, the lessor the amount of decrease of formaldehyde release were observed. 4. When the mixture of scavengers (Formamide and Glycerol) was added in the pad bath, .synergistic effect on formaldehyde release between the two scavengers wasn't observed. 5. The tensile strength of the resin finished fabric was reduced with increasing the pad lath pH and was influenced by the kind of scavengers, and the tensile strength was severely reduced when scavengers, especially Formamide, was added. The wrinkle recovery property is generally improved by resin finish on cotton fabric. When Formamide was added, the wrinkle recovery property is slightly decreased compared with that of the fabrics resin finished without a scavenger, and when polyol was added, the wrinkle recovery property showed almost no change.

• 핵의학기술
• /
• 제16권2호
• /
• pp.115-119
• /
• 2012

유방특이감마영상검사(Breast-specific Gamma Imaging, BSGI)는 $^{99m}Tc$-sestamibi와 고해상도 감마카메라를 이용하여 영상을 획득하는 방법으로 기본적으로 양측상하영상, 내외사방향영상을 얻으며 추가로 액와 림프절 검사를 시행 할 수 있다. 액와 림프절 전이 여부가 중요한 인자임에도 불구하고 아직까지 BSGI의 액와부 검사는 잘 시행되지 않고 있는 실정이다. 이에 본 연구에서는 2011년 5월부터 2012년 3월까지 본원에서 유방특이감마영상검사를 시행한 총 343명의 환자를 대상으로 액와 림프절 검사 결과를 분석하고 올바른 검사를 위한 기술적 사항을 연구하였다. 방사성의약품 주입 시 일어날 수 있는 혈관 포획, 혈관 외 유출현상이 영상에 영향을 끼치는 경우가 많았으며, 이를 방지하는 방법과 영상의 획득 방법을 규정하였다. 혈관 외 유출과 혈관의 포획현상을 최소화하기 위하여 $^{99m}Tc$-sestamibi를 주입 후, 10 cc의 생리 식염수를 주입한다. 주사 후 팔을 귀 위로 올리고 공을 이용하여 약 1분간 운동한다. 감마카메라의 납 차폐체를 제거하고 검출기에 기울기를 주어 최대한 검출기에 액와부를 밀착시키고, 납 앞치마를 이용하여 촬영하려는 측의 어깨 부분을 가려주어 배후 방사능을 최소화 한다. 액와부 영상은 2-3분 획득한다. BSGI 검사 시, 기존에 시행되던 양측 상하방향, 내외사방향영상만을 얻는 방식에서 액와 림프절 영상을 함께 획득 한다면 유방암의 치료성적 향상에 도움이 되며, 본 연구에서 얻은 기술적 사항을 검사에 적용한다면 유방암 환자들의 액와 림프절 영상의 효과를 더욱 극대화 시킬 수 있을 것으로 사료된다.

• 한국수산과학회지
• /
• 제7권2호
• /
• pp.91-97
• /
• 1974

북태평양의 백연어에는 카나다, 아라스카, 소련 및 일본의 네 계통이 있고, 소련과 일본의 아시아계는 경도$180^{\circ}$ 이서 해역에 분포하는 것으로 알려져 있다. 북태평양의 서방 해역의 백연어의 계통을 추적한다는 것은 공해상에서 어획된 백연어의 형질 측정치에 대해서 그것이 소련과 일본의 두 모집단의 어느 쪽으로부터 얻어진 것인가를 판별하는 문제에 귀착된다. 이 때 각 개체에 대해 관찰된 각 형질을 두 모집단간에 개별 비교한 결과를 종합하여 계통을 판별하는 것보다는, 이들 다수의 형질의 일차변환에 의해 각 형질에 나타나는 공통의 변동양상을 적절히 나타내고, 한편 두 모집단간의 차를 가장 확실히 표현하는 새로운 변량을 구하며, 이 새 변량에 의해 백연어의 계통을 판정하는 방법이 보다 높은 신뢰도를 기대할 수 있을 것이다. 본 연구에서 일본의 혹가이도와 소련의 캄차카반도의 일곱 하천으로부터 총 476개체의 백연어의 산란군(Fig.1, Table 1)으로부터 채집한 비늘의 첫 해의 연륜에 있어서 폭과 성장선 수의 두 형질을 측정하여, 선형판별함수를 구해, 이것이 북태평양 서방 해역에 분포하는 백 연어의 계통을 분리하는 데에 있어서 얼마나 유효한가를 조사했다. 정확한 판별 분석을 위해서 두 형질이 두 모집단간에 있어서 동일한 분산 및 공분산을 가진 다변량 정규분포를 하고 있는가를 검토하여 두 형질이 판별 분석에 적합함을 확인했다(Table 2,3 및 4). 구해진 선형판별함수 $Y=0.4803\;X_{1}+0.01156\;X_2$($X_1$은 성장선의 수, $X_2$는 폭)는 북태평양 서방 해역에 분포하는 백연어의 약 $80\%$를 일본계와 소련계로 정확히 분리했다(Fig. 2). 두 형질중 성장신의 수만으로써도 두 형질로부터 구한 선형판별함수에 의했을 때와 거의 동일한 확률로 계통을 분리할 수 있음을 알았다.

• 한국대기환경학회지
• /
• 제33권2호
• /
• pp.87-96
• /
• 2017

In this study, 4 gases containing typical chlorinated volatile organic compounds (VOCs) were treated by ultraviolet (UV) irradiation. The typical chlorinated VOCs are dichloromethane (DCM), trichloromethane (TCM), carbon tetrachloride (CTC) and trichloroethylene (TCE). The removal efficiency (RE) and the products of chlorinated VOCs by UV irradiation are investigated. At this time, 2 types of background gas (air and nitrogen) were used to figure out the RE by photooxidation and photolysis. The specification of UV-lamp used in this study was low-pressure mercury lamp emitting wavelength of 185~254 nm. The experimental conditions were set as initial VOC concentration of $180{\pm}10ppm$, empty bed retention time (EBRT) of 53 s, temperature of $23{\pm}2^{\circ}C$ and relative humidity of $65{\pm}5%$. In the photolysis condition with nitrogen ($N_2$) as background gas, the averaged RE of the 4 types of chlorinated VOCs was about 24% higher than that with photooxidation; and the REs of VOCs except CTC were confirmed as >99%. The composition of off-gases after UV photooxidation in air was investigated and several intermediates from DCM, TCM and TCE were detected by GC/MS. Among them, phosgene which is a toxics was detected as an intermediate of TCM. In addition, the concentration of carbon dioxide ($CO_2$) in the off-gases was measured to calculate the mineralization rate (MR). With the photooxidation, TCE showed the highest RE (>99%) while MR was the lowest (17%); and the MR of DCM was the highest (86%). In addition, particulate matters (PM) in the off-gases was also detected and high concentrated $PM_{10}$ ($21,580{\mu}g{\cdot}m^{-3}$) and $PM_{2.5}$ ($6,346{\mu}g{\cdot}m^{-3}$) were detected in TCE off-gas. More than 99% of the chlorinated VOCs could be removed using UV254-185 nm lamp, while it is necessary to conduct further studies on the production and treatment of secondary pollutants.

• 한국식품영양과학회지
• /
• 제17권4호
• /
• pp.305-311
• /
• 1988

가열유를 섭취시켰을때 흰쥐 간장내의 지질상태의 미치는 영향을 알아보기 위해 신선한 옥수수기름을 투여한 대조군과 산가2.10인 가열유를 투여한군(HA굴) 및 산가4.02인 가열유를 투여한군(HB군)으로 나누어 1일1회 1 g씩 각각 경구투여하여 3주간 및 6주간 사육한후 체중 및 간장의 무게, 간장에서의 triglyceride, total cholesterol, phospholipid함량 및 간장에서의 총지질 지방산조성과 phospholipld지방산 조성을 관찰하였다. 체중은 각군별 유의적인 차이를 보이지 않았으나 간장무게는 HB군이 가장 높게 나타났다. 또한, triglyceride와 cholesterol 함량은 사육기간이 경과함에 따라 HA, HB군이 대조군에 비해 증가하였다. phospholipid함량은 HB군을 6주간 투여한 군에서만 약간의 증가를 보였다. 실험에 사용한 식이유의 지방산조성은 $C_{18-2}$지방산이 대조군은 48.27%, HA군은 42.28%, HB군은 36.13% 순으로 감소되었으며 간장에서의 총지질 지방산조성과 phospholipid 지방산조성은 산폐도가 심한 기름을 오래 투여할수록 필수지방산과 고불포화지방산 함량이 공통적으로 감소되였다.

• 한국수학교육학회지시리즈E:수학교육논문집
• /
• 제24권2호
• /
• pp.325-344
• /
• 2010

본 연구는 중학생을 대상으로 학생들이 경험적 증명과 연역적 증명에 대한 선호를 결정할 때 영향을 미치는 요인을 분석하였다. 47명의 중학생에게 설문지를 통하여 자료를 수집하고 응답들을 분석한 결과, 경험적 증명과 연역적 증명의 선호에 영향을 미치는 요인들로 측정, 수학적 원리, 다양한 예를 통한 검증과정에 대한 인식들이 공통적으로 나타났다. 이 요소들은 경험적 증명과 연역적 증명의 선호와 비선호를 결정짓는 요인으로써, 선호하는 증명에 따라 상호 배타적으로 나타나지 않고 증명 선호에 영향을 미쳤다. 이를 통해 본 연구에서는 학생들이 특정 증명을 선호할 때, 한 증명에 대한 비선호와 다른 증명에 대한 선호가 동시에 작용할 수 있다는 결론과 함께 한 증명에 대한 선호요인을 보는 것만으로는 학생들의 증명 선호 이유를 정확히 파악할 수 없을 것이라는 가능성을 제언한다.