• 대한화학회지
• /
• 제44권1호
• /
• pp.60-67
• /
• 2000

표면공명흡수는 매질의 유전상수값에 의존한다. 금 나노미립자가 함침된 $TiO_2/SiO_2$ 복합산화물 박막을 $Ti(OPr^i)_4$과 $Si(OEt)_4$, 그리고 $HAuCl_4{\cdot}7H_2O$를 사용하여 졸-겔 방법으로 제조하였다. $TiO_2/SiO_2$ 박막에 함침된 금 나노미립자의 최대 표면 공명 흡수는 $TiO_2/SiO_2$의 몰비에 따라 540 nm에서 615 nm 까지 선형적으로 변하였다. 이러한 박막에 함침된 금 나노미립자의 크기와 구조를 TEM과 XRD로 측정하였다. 그리고 $TiO_2/SiO_2$ 박막의 유전상수값을 실험 data로부터 이론적으로 계산하였다

• 한국세라믹학회지
• /
• 제35권9호
• /
• pp.1002-1005
• /
• 1998

Bismuth titanate thin films were prepared on {{{{ { SrTiO}_{3 } }}(100) and Si(100) substrates by dipping-pyrolysis pro-cess using metal naphthenates as starting materials. crystallinity and in-phase alignment of the films were analyzed by X-ray diffraction $\theta$-2$\theta$ scans and $\beta$ scans (pole-figures) respectively. Highly c-axis-oriented {{{{ { { {Bi }_{4 }Ti }_{3 }O }_{12 } }} thin films with smooth surfaces were obtained after heat treatment at 75$0^{\circ}C$ on {{{{ { SrTiO}_{3 } }}(100) sub-strate while the films grown of Si(100) exhibited polycrstalline characteristics. C-axis oriented film show-ed an epitaxial relationship with the {{{{ { SrTiO}_{3 } }} substrate.

• 한국진공학회지
• /
• 제9권1호
• /
• pp.16-23
• /
• 2000

The epitaxial growth of $CeO_2$ films has been investigated on three different substrates-Si(111), $SrTiO_3$(001), and MgO(001)-over wide range of growth parameters using oxygen-plasma-assisted molecular beam epitaxy. Pure-phase, single-crystalline epitaxial films of $CeO_2$ (001) have been grown only on $SrTiO_3$(001). We discuss the growth conditions in conjunction with the choice of substrates required to synthe-size this oxide, as well as the associated characterization by menas of x-ray diffraction, reflection high-energy electron diffraction, low-energy electron diffraction, and x-ray photoelectron spectroscopy and diffraction. Successful growth of single crystalline $CeO_2$ depends critically on the choice of substrate and is rather insensitive to the growth conditions studied in this investigation. $CeO_2$(001) films on $SrTiO_3$exhibit the sturcture of bulk $CeO_2$ without surface reconstructions. Ti outdiffusion is observed on the films grown temperatures above $650^{\circ}C$.

• 한국진공학회지
• /
• 제16권6호
• /
• pp.446-452
• /
• 2007

R.F. magnetron-sputtering 방법에 의해 $(Pb_{1.1},La_{0.08})(Zr_{0.65}.Ti_{0.35})O_3$ 박막을 $Pt/Ti/SiO_2/Si$, $TiO_2(interlayer)/Pt/Ti/SiO_2/Si$ 기판에 증착하고, $TiO_2$ interlayer에 의한 PLZT 박막의 특성을 고찰 하였다. $TiO_2$ interlayer의 증착조건을 변화시켜가며 단일상의 anatase 상과 rutile 상을 증착하였고, 그 위에 증착시킨 PLZT 박막의결정성을 x-ray diffraction(XRD)을 통해 분석하였다. 또한 $TiO_2$ interlayer에 의한 $PLZT-TiO_2$, $TiO_2-Pt$ 박막의 계면상태를 고찰하기 위해 glow discharge spectrometer(GDS) 분석을 행하였고, PLZT의 강유전 특성을 고찰하기 위해 전기적 측정을 행하였다. $TiO_2$ anatase 단일 상에 증착한 PLZT의 경우 (110) 방향으로 우선 배향됨을 알 수 있었고, 12.6 ${\mu}C/cm^2$의 잔류분극 값을 나타내었다.

• 한국전기전자재료학회논문지
• /
• 제20권3호
• /
• pp.223-227
• /
• 2007

The effect of Eu contents on the ferroelectric properties of $Bi_{4-x}Eu_xTi_3 O_{12}$ (BET) thin films has been investigated. Bismuth Europium titanate thin films with a Eu contents were prepared on the $Pt/Ti/SiO_2/Si$ substrate by metal-organic decomposition technique. The structure and the morphology of the films were analyzed using X-ray diffraction (XRD) and field emission scanning microscopy (FE-SEM), respectively. From the XRD analysis, it was found that BET thin films have polycrystalline structure, and the layered-perovskite phase is obtained when the Eu contents exceeds 0.2 (x > 0.2). Also, the ferroelectric characteristics of the BET thin films were found to be dependent on the Eu content. Particularly, the BET films doped with x = 0.75 show better ferroelectric properties (remanent polarization 2Pr = 60.99 C/$cm^2$ and only a little polarization fatigue up to $3.5{\times}10^9$ bipolar switching cycling) than those doped with other Eu contents.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 C
• /
• pp.1835-1837
• /
• 2005

$Bi_{3.25}Y_{0.75}Ti_3O_{12}$[BYT] ferroelectric thin films were deposited by RF-Sputtering method on the $Pt/Ti/SiO_2/Si$. We investigated the effects of processing condition (especially post-annealing) on the structural and dielectric properties of the BYT thin films. The BYT thin films were crystallized well at annealing temperature of $750^{\circ}C$ for 30min. Increasing the annealing temperature, the peak intensity of (117) and c-axis orientation were increased. The calculated lattice constants of BYT thin films were a=0.539nm, b=0.536nm, c=3.288nm. The thickness of the BYT thin films were 350nm. The dielectric constant and dielectric loss at a frequency of 100KHz were 73.3 and 0.021, respectively. The BYT thin films can be used as capacitors in the Ferroelectric Random Access Memory device.

• 한국전기전자재료학회논문지
• /
• 제16권5호
• /
• pp.361-364
• /
• 2003

It was investigated that the structural and electrical Properties of Ce-doped Ba(Zr$_{x}$Ti$_{1-x}$ )O$_3$ (BCZT) thin films with a mole fraction of x=0.2 and a thickness about 100 nm. BCZT films were prepared on Pt/Ti/SiO$_2$/Si substrate by a RF magnetron sputtering system. We have measured the thickness profile with Ar/O$_2$ ratio and the surface roughness. It was observed that the oxygen gas, which introduced during the film deposition, have an influence on the roughness of the film and the film roughness was reduced by annealing from 2.33 nm to 2.02 nm (RMS at 500 $^{\circ}C$, Ar:6 sccm, $O_2$:6 sccm). It was found that annealing procedure after top electrode deposit can reduce the dissipation factor.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집
• /
• pp.565-568
• /
• 2001

We have fabricated $Bi_{3.25}$$La_{0.75}$ti$_3$O$_{12}$ (BLT) thin(200nm) films on the Pt/Ti/SiO$_2$/Si substrates using a MOD(Metalorganic decomposition) method with annealing temperature from 55$0^{\circ}C$ to 75$0^{\circ}C$. The structural properties of the films examined by x-ray diffraction. The layered-perovskite phase obtained above $600^{\circ}C$. Scanning electron micrographs showed uniform surface composed of rodlike grains. The grain size increased with increasing annealing temperature. The BLT thin films showed little polarization fatigue test up to 3.5x10$^{9}$ bipolar cycling at a 5V and 100kHz.kHz.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 D
• /
• pp.1456-1458
• /
• 1998

The $(Sr_{1-x}Ca_x)TiO_3(SCT)$ thin films were deposited at various substrate temperature using rf magnetron sputtering method on optimized Pt-coated electrodes ($Pt/TiN/SiO_2/Si$). The dielectric constant changes almost linearly in the temperature region of $-80{\sim}+90[^{\circ}C]$, the temperature characteristics of the dielectric loss exhibited a stable value within 0.1. The capacitance characteristics appears a stable value within ${\pm}5$[%]. The drastic decrease of dielectric constant and increase of dielectric loss in SCT thin films is observed above 200[kHz]. Dielectric constant of SCT thin films deposited on Si wafer substrate are larger with the increase of deposition temperature.

• 한국세라믹학회지
• /
• 제43권6호
• /
• pp.362-368
• /
• 2006

Epitaxial $Ba_{0.5}Sr_{0.5}TiO_3$ (BSTO) thin films have been grown on TiN buffered Si (001) substrates by Pulsed Laser Deposition (PLD) method and the effects of substrate temperature and oxygen partial pressure during the deposition on their dielectric properties and crystallinity were investigated. The crystal orientation, epitaxy nature, and microstructure of oxide thin films were investigated using X-Ray Diffraction (XRD) and Transmission Electron Microscopy (TEM). Thin films were prepared with laser fluence of $4.2\;J/cm^2\;and\;3\;J/cm^2$, repetition rate of 8 Hz and 10 Hz, substrate temperatures of $700^{\circ}C$ and ranging from $350^{\circ}C\;to\;700^{\circ}C$ for TiN and oxide respectively. BSTO thin-films were grown on TiN-buffered Si substrates at various oxygen partial pressure ranging from $1{\times}10^{-4}$ torr to $1{\times}10^{-5}$ torr. The TiN buffer layer and BSTO thin films were grown with cube-on-cube epitaxial orientation relationship of $[110](001)_{BSTO}{\parallel}[110](001)_{TiN}{\parallel}[110](001)_{Si}$. The crystallinity of BSTO thin films was improved with increasing substrate temperature. C-axis lattice parameters of BSTO thin films, calculated from XRD ${\theta}-2{\theta}$ scans, decreased from 0.408 m to 0.404 nm and the dielectric constants of BSTO epitaxial thin films increased from 440 to 938 with increasing processing oxygen partial pressure.