• Title/Summary/Keyword: "Green-one"

Search Result 2,448, Processing Time 0.03 seconds

Evaluation of Morphological Traits and Genetic Composition in Melon Germplasm (멜론 유전자원의 형태적 특성 및 유전적 구성 평가)

  • Lee, Seungbum;Jang, Ik;Hyun, Do Yoon;Lee, Jung-Ro;Kim, Seong-Hoon;Yoo, Eunae;Lee, Sookyeong;Cho, Gyu-Taek;Lee, Kyung Jun
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.65 no.4
    • /
    • pp.485-495
    • /
    • 2020
  • Melon (Cucumis melo L.), one of the most important fruit crop species, is cultivated worldwide. In this study, a total of 206 melon accessions conserved at the National Agrobiodiversity Center (NAC) in RDA were characterized for nine morphological characteristics according to the NAC descriptor list. In addition, to confirm the genetic composition of each melon accession, genetic profiling was performed using 20 SSR markers. Among the 206 melon accessions, 159 (77.2%) were collected from Asia. The color of fruit flesh and skin were mostly 'white' (56.0%) and 'green' (49%), respectively. Days to female flowering (FD) and maturity (MD) of the accessions ranged from 58 to 72 and 17 to 63, respectively. The fruit length and width of the accessions ranged from 6.0 to 29.3 and 3.6 to 17.2 cm, respectively. The sugar content (SU) ranged from 2.5% to 13.2% with an average of 7.0%. In correlation analysis, SU showed positive and negative correlations with MD and FD, respectively. The accessions were classified into four clusters by cluster analysis. From the results of genetic profiling using 20 SSR markers, three accessions (K189118, K100486, and K190292) were expected to be inbred lines among 206 melon accessions. These results could expand the knowledge of the melon germplasm, providing valuable material for the development of new melon varieties to suit consumer tastes.

Application of Response Surface Methodology for Optimization of Nature Dye Extraction Process (천연색소 추출공정 최적화를 위한 반응표면분석법의 적용)

  • Lee, Seung Bum;Lee, Won Jae;Hong, In Kwon
    • Applied Chemistry for Engineering
    • /
    • v.29 no.3
    • /
    • pp.283-288
    • /
    • 2018
  • As the use of environmentally friendly and non-disease natural pigments grows, various methods for extracting natural pigments have been studied. The natural color was extracted from parsley, a vegetable ingredient containing natural dyes. Target color codes of green series of natural dyes extracted as variables #50932C (L = 55.0, a = -40.0, b = 46.0) were set with the pH and temperature of extracted natural color coordinates (of the extracted), and the quantitative intensities of natural dyes were analyzed. During the colorimetric analysis predicted by the reaction surface analysis method, a color coordinate analysis was conducted under the optimal conditions of pH 8.0 and extraction temperature of $60.9^{\circ}C$. Under these conditions, predicted figures of L, a, and b were 55.0, -36.3, and 36.8, respectively, while actual experimental ones confirmed were 69.0, -35.9, and 31.4, respectively. In these results, the theory accuracy and actual error rate were confirmed to be 73.0 and 13.8%, respectively. The theoretical optimization condition of the color difference (${\Delta}E$) was at the pH of 9.2 and extraction temperature of $55.2^{\circ}C$. Under these conditions the predicted ${\Delta}E$ figure was 12.4 while the experimental one was 13.0. The difference in color analysis showed 97.5% of the theoretical accuracy and 4.5% of the actual error rate. However, the combination of color coordinates did not represent a desired target color, but rather close to the targeted color by means of an arithmetic mean. Therefore, it can be said that when the reaction surface analysis method was applied to the natural dye extraction process, the use of color coordinates as a response value can be a better method for optimizing the dye extraction process.

Monitoring of Pesticide Residues and Risk Assessment on Agricultural Products Marketed in the Northern Area of Seoul in 2013 (2013년 서울북부지역 유통농산물의 잔류농약 모니터링 및 위해성 평가)

  • Kim, Nam Hoon;Lee, Jeong Sook;Kim, Ouk Hee;Choi, Young Hee;Han, Sung Hee;Kim, Yun Hee;Kim, Hee Sun;Lee, Sae Ram;Lee, Jeong Mi;Yu, In Sil;Jung, Kwon
    • Journal of Food Hygiene and Safety
    • /
    • v.29 no.3
    • /
    • pp.170-180
    • /
    • 2014
  • The aim of this study was to investigate pesticide residues in 2,877 market vegetables in the northern area of Seoul in 2013. Pesticide residues in the samples were analysed by multiresidue method for 285 pesticides using GC-ECD/NPD and HPLC-DAD/FLD. 385 samples(13.4%) were detected with pesticide residues at or below MRL, and 15 samples(0.5%) were found to detect pesticide residues exceeding MRL. The most frequently detected samples were sedum(63.6%), chamnamul(45.8%), leek(44.5%) and green&red pepper(30.8%). Among the 15 violated samples, leek(5 cases) and welsh onion(4 cases) showed the highest violation rate. A total of 74 samples(18.5%) contained multiple pesticide residues in one vegetable. Procymidone, chlorofenapyr and cypermethrin were the pesticide most frequently found. As a tool of risk assessment through the consumption of pesticide detectable agricultural products, the ratio of estimated daily intake (EDI) to acceptable daily intake (ADI) was calculated into the range of 1.05~28.61%. The results have meant that there was no health risk through dieting commercial agricultural products detected with pesticide residues.

"Youhan", New Whole Crop Barley Cultivar of Hooded Spike and Fine Growth Ability in Spring (초기생육이 빠른 삼차망 청보리 신품종 '유한')

  • Park, Tae-Il;Oh, Young-Jin;Park, Hyoung-Ho;Park, Jong-Chul;Cho, Sang-Kyun;Noh, Jae-Hwan;Kim, Dae-Wook;Song, Tae-Hwa;Chae, Hyun-Seok;Jeung, Jae-Hyun;Hong, Ki-Heung;Bae, Jeong-Suk;Huh, Jae-Young;Jang, Yun-Woo;Kim, Kee-Jong;Park, Ki-Hun;Han, Ouk-Kyu
    • Journal of The Korean Society of Grassland and Forage Science
    • /
    • v.35 no.2
    • /
    • pp.81-86
    • /
    • 2015
  • "Youhan" (Hordeum vulgare L.), a new whole-crop barley cultivar, was developed by the breeding team at National Institute of Crop Science, RDA in 2012. Youhan has the growth habit of III, a light green and mid-sized leaf, hooded and lax-type spikes. The cultivar showed 107 cm of culm length, 641 spikes per $m^2$. The heading date of Youhan was May 1, which is one day later than that of the check cultivar "Yuyeon" in upland, and 2 days earlier than that of Yuyeon in paddy field. The maturation time was similar to check cultivar Yuyeon on June 4 in upland and May 31 in paddy field. In terms of winter hardiness and resistance to lodging and disease, Youhan also performed better than the check cultivar. The average forage dry matter (DM) yield in the regional yield trial was approximately 12.6 ton $ha^{-1}$ and 12.0 ton $ha^{-1}$ in upland and paddy field, respectively, which were 6% and 5% higher than that of the check. The yield also showed 7.3% of crude protein, 26.8% of ADF (acid detergent fiber), 47.8% of NDF (neutral detergent fiber), 67.7% of TDN (total digestible nutrients), and a higher grade of silage quality for the whole-crop barley. Fall sowing cropping of Youhan is recommended only in those areas where the average daily minimum-mean temperatures in January are higher than $-8^{\circ}C$, and it should not be cultivated in mountainous areas of Korea.

Epidemics of Ascetic Meningitis in Kyoungsangnamdo from May to August, 1996 (96년도 상반기에 경상남도 중부지방에서 유행한 무균성 뇌막염에 대한 고찰)

  • Kwon, Oh Su;Lee, Kyoung Lim;Kim, Won Youb;Jung, Won Jo;Ma, Sang Hyouk;Lee, Kyu Man
    • Pediatric Infection and Vaccine
    • /
    • v.4 no.1
    • /
    • pp.97-105
    • /
    • 1997
  • Purpose : Aseptic meningitis mainly caused by enterovirus is common in pediatric population especially during summer & fall. Most of pediatric patients restore their health without any complications with proper management. Between May to August of 1996, Masan and surrounding areas of the Kyoungsangnamdo were epidemic areas for the aseptic meningitis. The purpose of this study was to determine causative virus and describe correlation between disease and clinical symptoms in aseptic meningitis patients and those with fever and characteristic rashes without apparent meningitis symptoms. Methods : Between May to August, 1996, 57 patients with high fever and characteristic feature of rashes were reviewed. From 22 cerebrospinal fluid & 57 stool obtained specimens, viral culture and detection of enterovirus RNA were conducted. Collected specimens were kept in $-30^{\circ}C$ environment until sending of specimens to labortory. The virus identified through indirect immunofluorescence. RT-PCR method was used to identify enterovirus RNA in cerebralspinal fluid. Results : 1) One hundred fifty five pediatric patients with viral infection required hospitalization. Disease occurred higher rate in male than female with ratio of 1.94:1. Examined patients' age ranged from 15days old to 15years old. But most of patients(74.8%) were under age of 5years old. The time of occurrence was between May to August of 1996. 2) All patients had high fever and physical symptoms in those patients include headache, vomiting, abdominal pain, diarrhea, and rashes. The rashes observed mainly in patients under age of 4 years and were predominantly commom patients under age of 18 months olds)<0.001). 3) Between sampled patients and non-sampled patients, clinical course was similar. Echovirus type 9 was cultivated in 41 out of 57 cases of collected stool specimens. RT-PCR that used on CSF showed positive results in 10 out of 22 cases. Three cases of positive cultivated of positive results in RT-PCR were echovirus type 9. Conclusions : Echovirus type 9 was thought to be the causative agent of aseptic meningitis that was prevalent throughout mid areas of Kyoungsangnamdo from May to August, 1996. Additionally causative agent that responsible for high fever with rashes without meningitis symptoms also thought to be the same echovirus type 9.

  • PDF

Model of Drying Stress Distribution in Disks End-wrapped in Korean Paper and Effects of End-wrappings on Prevention of Drying Defects for Vacuum Drying of Disks (한지(韓紙) 엔드래핑처리 원판(圓板)의 감압건조응력(減壓乾燥應力) 분포모형(分布模型) 및 엔드래핑스의 건조결함(乾燥缺陷) 예방효과(豫防效果))

  • Lee, Nam-Ho;Jung, Hee-Suk
    • Journal of the Korean Wood Science and Technology
    • /
    • v.19 no.1
    • /
    • pp.31-63
    • /
    • 1991
  • It was proved that in conventional kiln drying of disks piling position in the kiln exerted a great influence on drying rates, and the larger the variation of disk diameter, the more undulating drying rates of disks. While in vacuum drying disks there was no influence on drying rates. By the end-wrapping treatments and the radial direction of disks tangential surface stresses in the core of disks were slightly compressive in three species. In control disks the drying stresses distributed into one step-style that compressive stresses in the pith side of 6cm from pith were larger than those in the bark side, while in the disks end-wrapped with Korean paper the drying stresses distributed uniformly, because flow rates of free water in disks had no difference between heart-and sap-wood by obstruction of evaporating water from surface of disks by end-wrapping with Korean paper. And end-wrapping with Korean paper considerably restrained those. Tangential differential shrinkage stresses developed the maximum tensile stress near the bark and with approaching the pith the stresses gradually reduced and changed into compressive stresses in near the pith. At the end of vacuum drying the maximum tangential tensile stresses of disks end-wrapped with Korean paper were smaller than those of control disks, and critical moisture contents causing the V-shaped crack of disks end-wrapped with Korean paper were lower than those of control disks because of the set by obstruction of evaporating water of end-wrapping with Korean paper. In the experiment of vacuum drying stress distribution the disks end-wrapped with Korean paper or aluminum foil in three species were free from V-shaped cracks and control disks were defected very slightly by V-shaped cracks. And also disks end-wrapped with Korean paper were free from heart checks in Alnus japonica and Juglans sinensis, and heart checks were occurred very slightly in others. Especially, not to speak of disks end-wrapped with Korean paper, vacuum drying of disks end-wrapped with aluminum foil prevented effectively drying defects, moreover drying times could be shortened, that is. Ginkgo biloba, Alnus japonica, and Juglans sinensis disks could be dried from green to in-use moisture content in 110 hours, 272 hours, and 407 hours, respectively.

  • PDF

Participatory Design Process for the Utilization of the Military Relocation Site - The Case of the Idea Competition for the Fukaya Communication Site in Yokohama - (군기지 이전지 활용에 관한 참여설계과정 - 요코하마 후카야 통신소 이전지 아이디어 공모사업 사례 -)

  • Park, Ji-Hyun;Son, Yong-Hoon;Tsuge, Kiharu
    • Journal of the Korean Institute of Landscape Architecture
    • /
    • v.39 no.3
    • /
    • pp.10-25
    • /
    • 2011
  • Since 1950, the city of Yokohama has been demanding the return of US. military base sites in Yokohama. Yokohama has established a systematic utilization plan for these relocation sites. The Fukaya communication site is one of former US. military bases verified for return in 2004. The Fukaya communication site is distinctively circular in shape and is entirely national land. Yokohama took an idea competition to its citizens to create a new park at the relocation of the Fukaya communication site, involving lots of citizen opinion in its utilization goals. This study determined the process of the idea competition at the Fukaya communication site in encouraging civic participation and analyzing citizen demands for the utilization of the relocation site. Through the idea competition, Yokohama city was able to obtain several ideas on the new park from various angles such as the function and shape of the urban open spaces. Citizens showed great interest in creating a park as green infrastructure on the Fukaya communication site. In addition, beyond utilization as an urban open space, many ideas suggested new lifestyles for the region in connection with the natural environment in the vicinity. Yokohama city tried to share the process and results of the idea competition with as many citizens as it could through a variety of means such as Participation, Judging, Support, Observation and Understanding. The case study on the idea competition at the Fukaya communication site is a good example of community design practice in public projects, and is full of suggestions for military bases in Korea, which has just established the plan of utilizing relocation sites as parks. Based on this case study, it can be concluded that it is important to make a systemic form for utilization planning with a clear process, open information and partnership in a variety of participatory design processes in order to ensure maximum civic utilization of relocation sites.

On the manufacturing of WPC (Wood Plastic Composites) with Heat-Catalyst Polymerization (I) - On the characteristics of composites made from monomer Methyl MethacryIate and several commercial woods in Korea (가열(加熱)·촉매중합법(觸媒重合法)에 의한 목재(木材)·고분자복합체(高分子複合體) 제조(製造)(I) - MMA에 의한 한국산(韓國産) 주요목재(主要木材)의 복합체특성(複合體特性))

  • Cho, Nam-Seok;Jo, Jae-Myeong;Ahn, Won-Yong
    • Journal of the Korean Wood Science and Technology
    • /
    • v.2 no.3
    • /
    • pp.3-16
    • /
    • 1974
  • One of the disadvantages of. wood and wood products is their hydroscopicity or dimensional instability. This is responsible for the loss of green volume of lumber as seasoning degrade. Dimensional stabilization is needed to substantially reduce seasoning defects and degrades and for increasing the serviceability of wood products. Recently, considerable world-wide attention has been drawn to the so-called Wood-Plastic Composites by irradiation-and heat-catalyst-polymerization methods and many research and developmental works have been reported. Wood-Plastic Composites are the new products having the superior mechanical and physical properties and the combinated characteristics of wood and plastic. The purpose of this experiment was to obtain the basic data for the improvement of wooden materials by manufacturing WPC. The species examined were Mulpurae-Namoo (Fraxinus, rhynchophylla), Sea-Namoo (Carpinus laxiflora), Cheungcheung-Namoo (Cornus controversa), Gorosae-Namoo (Acermono), Karae-Namoo(Juglans mandshurica) and Sanbud-Namoo (Prunus sargentii), used as blocks of type A ($3{\times}3{\times}40cm$) and type B ($5{\times}5{\times}60cm$), and were conditioned to about 10~11% moisture content before impregnation in materials humidity control room. Methyl methacrylate (MMA) as monomer and benzoyl peroxide (BPO) as initiator are used. The monomer containing BPO was impregnated into wood pieces in the vacuum system. After impregnation, the treated samples were polymerized with heat-catalyst methods. The immersed weights of monomer in woods are directly proportionated to the impregnation times. Monomer impregnation properties of Cheungcheung-Namoo, Mulpurae-Namoo and Seo-Namoo are relatively good, but in Karae-Namoo, it is very difficult to impregnate the monomer MMA. Fig. 3 shows the linear relation between polymer retentions in wood and polymerization times; that is, the polymer loadings are increasing with polymerization times. Furthermore species, moisture content, specific gravity and anatomical or conductible structure of wood, bulking solvents and monomers etc have effects on both of impregnation of monomer and polymer retention. Physical properties of treated materials are shown in table 3. Increasing rates of specific gravity are ranged 3 to 24% and volume swelling 3 to 10%. ASE is 20 to 46%, AE 14 to 50% and RWA 18 to 40%. Especially, the ASE in relation to absorption of liquid water increases approximately with increase of polymer content, although the bulking effect of the polymerization of monomer may also be influential. WPCs from Mulpurae-Namoo and Cheungcheung-Namoo have high dimensional stability, while its of Karae-Namoo and Seo-Namoo are-very low. Table 4 shows the mechanical properties of WPCs from 6 species. With its specific gravity and polymer loading increase, all mechanical properties are on the increase. Increasing rate of bending strength is 10 to 40%, compression strength 25 to 70%, ;impact bending absorbed energy 4 to 74% and tensile strength 18 to 56%. Mulpurae-Namoo and Cheungcheung-Namoo with high polymer content have considerable high increasing rate of strengths. But incase of Karae-Namoo with inferior monomer impregnation it is very low. Polymer retention in cell wall is 0.32 to 0.70%. Most of the polymer is accumulated in cell lumen. Effective. of polymer retention is 58.59% for Mulpurae-Namoo, 26.27% for Seo-Namoo, 47.98% for Cheungcheung-Namoo, 25.64% for Korosae-Namoo, 9.96% for Karae-Namoo and 25.84% for Sanbud-Namoo.

  • PDF

Hydrophilic Modification of Porous Polyvinylidene Fluoride Membrane by Pre-irradiating Electron Beam (전자빔 전조사를 이용한 Polyvinylidene Fluoride 다공막의 친수화 개질)

  • Choi, Yong-Jin;Lee, Sung-Won;Seo, Bong-Kuk;Kim, Min
    • Membrane Journal
    • /
    • v.21 no.2
    • /
    • pp.118-126
    • /
    • 2011
  • A method of light pre-irradiation, one of methods modifying hydrophobic surface to hydrophilic surface in a membrane, was proposed to overcome the drawback of previous methods such as blending, chemical treatment and post-irradiation, Process of membrane preparation in the study was comprised of 4 parts as follows: firstly process of precursor preparation to introduce hydrophilic nature under atmosphere and aqueous vapor by irradiating electron beam (EB), secondly process of dope solution preparation to cast on non-woven fabrics, thirdly process of casting to prepare membrane and finally process of coagulation in non-solvent to form porous structure. The merit of this method might show simple process as well as homogenous modification compared to previous methods. To carry it out, precursor was prepared by irradiating EB to powder PVDF at 75~125 K Gray dose. Precursor prepared was analyzed by FTIR, EDS and DSC to confirm the introduction of hydrophilic function and its mechanism. From their results, it was inferred I conformed that hydrophilic function was hydroxy1 and it was introduced by dehydrozenation. Hydrophilicity of membranes prepared was evaluated by contact angle (pristine PVDF : $62^{\circ}$, 125 K Gray-PVDF$13^{\circ}$). Porosity was evaluated by mercury intrusion method, simultaneously morpholoy and surface pore size were observed by SEM phothographs. The result showed the trend that more dose of EB led to smaller pore size and to lower porosity (pristine PVDF : 82%, 125 K Gray-PVDF : 63%). Trend of water permeability was similar to result above (pristine PVDF : 892 LMH, 125 K Gray-PVDF : 355 LMH).

Selection of Chemicals for Separation of Copulated Moth of Silkworm, Bombyx mori L. (약제에 의한 가잠교미아의 할애효과에 대하여)

  • 박광의;마영일;황석조
    • Journal of Sericultural and Entomological Science
    • /
    • v.26 no.2
    • /
    • pp.11-15
    • /
    • 1984
  • To save the labour reguired for separation of copulated moth during egg Production, some of the chemicals available at the market were on screen test for easy separation of copulated moth of silkworm. The obtained results are summarized as following. 1. In a separation ratio of copulated moth along with a treating time, TCTFE(Trichloro-trifluoroethane) completely separated the copulated moth in 10 minutes. The combinations of TCTFE plus Acetone (87.5 : 12.5 V/V) and TCTFE plus Acetic acid (50 : 50 V/V) take 25minutes for the complete separation of copulated moth. Use of Acetic acid solution only makes 100% separation of copulated moth in one hour and foully minutes and non$.$treatment shows only 47.5% of separation in three and half hours. On the other hand. There is no statistical significance between TCTFE Plus Acetone and control in the egg productivity. 2. The combination of TCTFE Plus Acetone (87.5 : 12.5 V/V) does not infuluence the egg productivity of the moth, showing 443 grains for an average number of egg per moth out of which 417 grains are for the number of fertilized eggs while control shows 452 grains for an avarage number of egg/moth and 428 grains for the number of fertilized eggs. However a sing1e use of TCTFE and Acetic acid shows less egg productivity and number of ferilized eggs per moth, respectively as compared to those of the control. In particular, a single use of acetic acid makes an increase of number of non-egg prodncible moth and it seems to be brought due to a chemical damage. 3. In a rearing test of the egg laid by the chemical treated moth, there are no differences among the treatments in all of the useful characters of the larvae; larval duration, survival rate, cocoon yield, single cocoon weight, single cocoon shell weight and cocoon shell ratio. In these regards, it is recognized that TCTFE can be practically used for the separation of copulated moth and the combination of TCTFE and Acetone promote its efiectiveness on the separation of copulated moth.

  • PDF