• Journal of Convergence for Information Technology
• /
• v.8 no.5
• /
• pp.229-236
• /
• 2018

In the past, technology commercialization was implemented in a narrow sense, such as technology transfer or start-up support. It has been pointed out that lack of entrepreneurial experience, failure in technology development, and insecure markets lead to failure of technology commercialization. The project supporting direct commercialization of technologies owned by academic and research institutes conjoins public funds and operating power of large enterprises to introduce a new technology commercialization model that combines commercialization technology with capital, market, and government policies. And pain points for direct commercializing technology was derived. Through research and analysis, a gap was found between the demand factors and the capability of the actors performing the technology commercialization, and it showed a significant correlation with the paint points. In consequence, measures were drawn to improve support policies to enhance the efficiency of commercialization of technologies held by universities and research institutes.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.4
• /
• pp.311-316
• /
• 2020

The purpose of this study is to compare fatigue, stress and quality of sleep between good sleep quality and poor sleep quality. Fatigue, stress and quality of sleep were assessed using three questionnaires; fatigue severity scale(FSS), Perceived stress scale(PSS), and Pittsburgh sleep quality index(PSQL). As a result of the study, the higher stress(22.2 vs. 19.0, p=.000) and poorer quality of sleep(11.2 vs. 5.7, p=.000) were observed between good sleep quality and poor sleep quality groups. Our finding show that time of going to bed and stress level influenced quality of sleep.

• Transactions of the Korean hydrogen and new energy society
• /
• v.24 no.1
• /
• pp.61-69
• /
• 2013

Polymer exchange membrane (PEM) fuel cells have multifunctional properties, and bipolar plates are one of the key components in these fuel cells. Generally, a bipolar plate has a gas flow path for hydrogen and oxygen liberated at the anode and cathode, respectively. In this study, the influence of iodine applied to a bipolar plate was investigated. Accordingly, we compared bipolar plates with and without iodine coating, and the performances of these plates were evaluated under operating conditions of $75^{\circ}C$ and 100% relative humidity. The membrane and platinum-carbon layer were affected by the iodine-coated bipolar plate. Bipolar plates coated with iodine and a membrane-electrode assembly (MEA) were investigated by electron probe microanalyzer (EPMA) and energy-dispersive x-ray spectroscopy (EDS) analysis. Polarization curves showed that the performance of a coated bipolar plate is approximately 19% higher than that of a plate without coating. Moreover, electrochemical impedance spectroscopy (EIS) analysis revealed that charge transfer resistance and membrane resistance decreased with the influence of the iodine charge transfer complex for fuel cells on the performance.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.7
• /
• pp.1696-1701
• /
• 2009

In this paper we analyzed the management performance as the result of the korean government's support policy for the small and medium sized business (SMB). The governmental support policy was carried out for the companies classified in 3 criterion. The first is the upbringing of dynamic SMB group, which are driven by creativity and innovation. The second is the enforcement of technology-innovation and cooperation for SMB. The last is the establishment of the growth basis for SMB like funds, human resources and distribution channels. After categorization of above 3 classes, the affect of support policy on the management performance is analyzed, in terms of 3 aspects, management performance, technical performance and policy satisfaction. This study shows that the governmental support policy has the remarkable effects on the financial support sector of SMB. The 5 major sectors, 1) the upbinging of venture-innobiz innovation company, 2) rearing funds of knowledge-based service company, 3) R&D support, 4) support of management stability fund, 5) expansion of distribution channel to the public sector, are designed from 24 variables. The 3 sectors of these 5 are have the main influences from governmental support policy.

• The Journal of the Korea Contents Association
• /
• v.21 no.2
• /
• pp.195-205
• /
• 2021

The purpose of this study is to validate the Confusion, Hubbub, and Order Scale (CHAOS), developed by Matheny et al. (1995), in South Korea. Data of 189 parents with children under the age of 5 acquired by online survey were used for the analysis. Descriptive statistics, item-total correlation, internal consistency, confirmatory factor analysis, convergent validity were examined. As a result, 13 items were confirmed and the reliability was .881. By validating K-CHAOS, it became possible to consider the effect of physical environment, that are known to affect psychological and social development of individuals, as one of micro-systems in future studies.

• Journal of the Korea Convergence Society
• /
• v.12 no.8
• /
• pp.381-391
• /
• 2021

The purpose of this study was to validate the Korean version of autonomy preference index (K-API) for chronic patients. Participants were 569 chronic patients. Construct validity and reliability of K-API were examined using exploratory and confirmatory factor analysis, and Cronbach's α test. Original API was translated to Korean, and we conducted contents validity test, and pilot test. The K-API consisted of 10 items divided into two domains: (i) Decision making preference (DMP); (ii) Information seeking preference (ISP). K-API explained 53.4% of autonomy preference; the two-factor structure showed an acceptance fit. Cronbach's α was. 77 for DMP, and. 75 for ISP. Validity and reliability of the K-API were established, and this study provides additional evidence for the usage of the API in Asian region.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.6A
• /
• pp.989-999
• /
• 2006

In this paper, numerical analysis method to perform linear dynamic analysis of bridge considering the road surface roughness and bridge-vehicle interaction when vehicle is moving on bridge is presented. The vehicle and bridge are modeled as three-dimension where contact length of tire and pitching of tandem spring are considered and single truck with 2-axles and 3- axles, and tractor-trailer with 5-axles are modeled as 7-D.O.F., 8-D.O.F., and 14-D.O.F., respectively. Dynamic equations of vehicle are derived from the Lagrange's equation and solution of the equation is obtained by Newmark-${\beta}$ method. The surface roughness of bridge deck for this analysis is generated from power spectral density (PSD) function. Beam element for the main girder, shell element for concrete deck and rigid link between main girder and concrete deck are used. The equations of the motion of bridges are solved by mode-superposition procedures. The proposed procedure is validated by comparing the results with the experimental data by Whittemore and Fenves.

• Journal of the Korean earth science society
• /
• v.44 no.6
• /
• pp.643-654
• /
• 2023

The West Philippine Basin, an oceanic basin half the size of the Philippine Sea Plate, lies in the western part of the plate and south of the Korean Peninsula on the Eurasian Plate. It subducts beneath the Eurasian Plate and the Philippine Islands bordering the Ryukyu Trench and the Philippine Trench with 25-50% of this basin already consumed. However, the history of the opening of the basin's southern region has been a topic of debate. The non-transform discontinuity formed during the seafloor spreading is similar to the transform fault boundaries normally perpendicular to mid-ocean ridge axes; however, it was created irregularly due to ridge propagations caused by variations of mantle convection attributable to magma supply changes. By analyzing high-resolution multi-beam echo-sounding data, we confirmed that the non-transform discontinuity due to the propagating rift evolved in the entire basin and that the abyssal hill strike direction changed from E-W to NNW-SSE from the fossil spreading center. In the early stage of basin extension, the Amami-Sankaku Basin was rotated 90 degrees clockwise from its current orientation, and it bordered the Palau Basin along the Mindanao Fracture Zone. The Amami-Sankaku Basin separated from the Palau Basin while the spreading of the West Philippine Basin began with a counter-clockwise rotation. This indicates that the non-transform discontinuities formed by a sudden change in magma supply due to the drift of the Philippine Sea Plate and simultaneously with the rapid changes in the spreading direction from ENE-WSW to N-S. The Palau Basin was considered to be the sub-south of the West Philippine Basin, but recent studies have shown that it extends into an independent system. Evidence from sediment layers and crustal thickness hints at the possibility of its existence before the West Philippine Basin opened, although its evolution continues to be debated. We performed a combined analysis using high-resolution multi-beam bathymetry and satellite gravity data to uncover new insights into the evolution of the West Philippine Basin. This information illuminates the complex plate interactions and provides a crucial contribution toward understanding the opening history of the basin and the Philippine Sea Plate.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.23 no.5
• /
• pp.246-254
• /
• 2013

Translucent opal glass was fabricated in order to substitute polycarbonate diffuser of LED lighting for the purpose of improving the durability problem. Calcium phosphate was used for the opacifier of opal glass and melted at $1550^{\circ}C$ for 2 hrs in electric furnace. Because opal glass was made by phase separation and growth of opacifier grains during cooling procedure after forming of melted glass, we identified the effect of opaque properties by the change of forming and cooling temperature, as R.T. (room temperature), $850^{\circ}C$, $1100^{\circ}C$ and $1200^{\circ}C$. As the results, it had excellent optical properties for the diffuser of LED lighting in the fabricated sample of forming and cooling at $1200^{\circ}C$, with no dazzling from direct light by high haze value over 82 % and low parallel transmittance value under 10 %. For the thermal properties, it had expressed thermal expansion coefficient of $6.352{\times}10^{-6}/^{\circ}C$ and softening point of $839^{\circ}C$.

• Korean Journal of Environment and Ecology
• /
• v.27 no.5
• /
• pp.642-649
• /
• 2013

This study evaluated the efficacy of information and self-interpretive media that provide information on park environment using self-administered visitor survey to the Dadohaehaesang National Park, Korea. Excluding missing and unreliable responses, 205 valid responses were used for the analysis. Socioeconomic status and visiting behavior of the visitors to the Dadohaehaesang National Park were similar to those to other Korean national parks. Results showed that, of the self-interpretive media, 'Information board of park use and resources' were most frequently used (87.7%), followed by 'Interpretive label of woody plant,' and 'Bulletin boards for information and enlightenment.' 'Guided interpretation' was used less than 40% of the visitors. Visitors also highly rated the importance of the media (higher than 4.0 on average out of 5 point Liker scale question). The average performance rate was 3.82, suggesting that visitors were satisfied on the self-interpretive media. Visitors responded that 'Information board of park use and resources' and 'Bulletin boards for information and enlightenment' were not useful and, therefore, should be amended and managed to improve the self-interpretability of the media.