권호 표지

Journal of Hydrogen and New Energy (한국수소및신에너지학회논문집)

The Korean Hydrogen and New Energy Society (KHNES)

  • Bimonthly
  • /
  • 1738-7264(pISSN)
  • /
  • 2288-7407(eISSN)

Domain

  • Energy/Resources ＞ New and Renewable Energy

Aim & Scope

The Transactions of the Korean Hydrogen and New Energy Society (TKHNS) aims to provide a forum for information on research, development and demonstration in the areas of hydrogen and new energy. The Journal publishes original research and reviews covering all aspects of hydrogen production, storage and utilization as well as new and renewable energy for sustainable energy systems, in the following classifications: - Hydrogen economy, policy, and environmental impact - Hydrogen production - Hydrogen storage, separation, purification, and liquefaction - Fuel cells and their applications - BOP for hydrogen and fuel cell systems - Hydrogen safety and sensors - Hydrogen transportation and infrastructure - Combustion, engine, and heat transfer - New energy applications I - coal-based technologies, CCS, etc. - New energy applications II – battery, flow battery, energy storage, etc. - Other unclassified technologies in hydrogen and new energy

http://journal.hydrogen.or.kr/ KSCI KCI

Volume 16 Issue 3

  1. Ryu, Ho-Jung;Jin, Gyoung-Tae 209
    PDF KSCI
    To find a suitable metal component in oxygen carrier particles for chemical-looping hydrogen generation system(CLH), oxygen transfer capacities of metal components were compared and Ni has been selected as the best metal component. The proper operating conditions to achieve high hydrogen generation rate have been investigated based on the chemical-equilibrium composition analysis for water splitting reactor. Moreover, suitable compositions of syngas from gasifier of heavy residue to achieve high energy efficiency have been investigated by calculation of heat of reaction. Based on the selected operating conditions, the best configuration of two interconnected fluidized beds system for the chemical-looping hydrogen generator has been investigated as well.
  2. Baek, Jin-Sook;Yun, Young-Su;Kim, Mi-Sun 219
    PDF KSCI
    Fermentative strict anaerobic bacterium, Clostricium butyricum NCIB 9576 (Cl. butyricum) and purple sulfur phototrophic bacterium, Thiocapsa roseopersicina NCIB 8347 (T. roseopersicina) were compared on their temperature and oxygen stabilities of cytoplasmic hydrogenases. Cell growth phase and the specific activities of evolution $H_2ase$ were related for both strains, exhibiting the highest cytoplasmic $H_2ase$ activities during the logarithmic growth phases which were 4 and 18 hrs after the incubation for Cl. butyricum and T. roseopersicina, respectively. The optimum temperatures for the growth of Cl. butyricum and T. roseopersicina were 37$^{\circ}C$ and 27$^{\circ}C$, respectively, while those for $H_2$ evolution of cytoplsmic hydrogenases prepared from Cl. butyricum ($C-H_2ase$) and T. roseopersicina ($T-H_2ase$) were 45$^{\circ}C$ and 65$^{\circ}C$, respectively. $T-H_2ase$ was more thermo-stable than $C-H_2ase$. $T-H_2ase$ retained its full activity for 5 hrs at 50$^{\circ}C$ and retained 90% of its original activity for 5 hrs at 60$^{\circ}C$, however, $C-H_2ase$ lost its activity drastically at 50$^{\circ}C$. The optimum pHs for $H_2$ oxidation of $C-H_2ase$ and $T-H_2ase$ were 9.0 and 7.5 respectively. The both enzymes showed maximum $H_2$ evolution activity at pH 7.0. Under the aerobic condition, 80% of $T-H_2ase$ activity was retained for 10 hrs at 30$^{\circ}C$, and 50% of activity was still remained after 6 days at the same experimental conditions. But the $C-H_2ase$ was labile to oxygen and lost its activity immediately after the exposure to air.
  3. Lee, Kyoung-Ho;Kwon, Oh-Chae 229
    PDF KSCI
    A new burner configuration for a compact fuel-cell reformer with a high-temperature air combustion concept was numerically studied. The burner was designed for a 40 $Nm^3/hr$ hydrogen-generated reformer using natural gas-steam reforming method. In order to satisfy the primary requirements for designing a reformer burner (uniform distribution of temperature along the fuel processor walls and minimum heat losses from the reformer), the features of the present burner configuration included 1) a self-regenerative burner for an exhaust-gas-recirculation to apply for the high-temperature air combustion concept, and 2) an annular-type shield for protecting direct contact of flame with the processor walls. For the injection velocities of the recirculated gas of 0.6-2.4 m/s, the recirculated gas temperature of 1000 K, and the recirculated oxygen mole fraction of 4%, the temperature distributions along the processor walls were found uniform within 100 K variation. Thus, the present burner configuration satisfied the requirement for reducing temperature gradients along the processor walls, and consequently demonstrated that the high-temperature air combustion concept could be applied to the practical fuel reformers for use of fuel cells. The uniformity of temperature distribution is enhanced as the amount of the recirculated gas increases.
  4. Seok, Song;Shin, Kyung;Kweon, Soon-Yong;Ur, Soon-Chul;Lee, Young-Geun;Hong, Tae-Whan 238
    PDF KSCI
    Mg and Mg-based alloys are most important hydrogen storage materials. It is a lightweight and low-cost materials with high hydrogen storage capacity. However, the formation of hydride at high temperature, the deterioration effect, the hydriding and dehydriding kinetics are bad factor for application. In this study, Mg and Ni have been produced by hydrogen induced mechanical alloying(HIMA) process. The raw materials, Mg(purity 99.9%) chip and Ni(purity 99.95%) chip was prepared by using a planetary ball mill apparatus(FRITSCH pulverisette 5). The balls to chips mass ratio(BCR) are 30:1. The hydrogen pressure induced 2.0MPa and milling times were 12, 24, 48, 72, 96 hours with a rotating speed of 200rpm. X-ray diffraction(XRD) analysis was made to characterize the crystallite size and misfit strain. The crystallite size measured by laser particle size analysis(PSA). Microstructure changes were investigated by scanning electron microscopy(SEM) and the transmission electron microscopy(TEM). The hydrogen storage properties were evaluated by using an Sivert's type automatic pressure-composition-therm(PCT) apparatus.
  5. Song, D.M.;Park, C.N.;Choi, J. 244
    PDF KSCI
    It is very interesting and important in the academic point of view and in practical use the hydrogen-induced phase separation(HIPS) which appears during hydrogen heat treatment. Since hydrogen can be removed very fast by pumping it out the hydrogen-induced new lattice phase which can not be obtained without hydrogen can be preserved as meta-stable state. In this study it has been investigated whether the HIPS appear in Pd-Al, Pd-Co, Pd-Cr, Pd-Ti, Pd-V and Pd-Zr alloys and discussed thermodynamic representation of the HIPS. The Pd alloys were arc-melted under argon atmosphere and remelted 4 or 5 times for homogenization. The alloys were annealed at 600$^{\circ}C$ under vacuum for 24 hrs and then subjected to pressure-composition isotherm measurements at 100$^{\circ}C$. The hydrogen heat treatment(HHT) of samples was carried out at 600$^{\circ}C$ under hydrogen pressure of 70 bar for 6 days and PC isotherms at 100$^{\circ}C$ were measured. By comparing the PC isotherms measured before and after HHT, occurrence of phase separation was determined. The experimental results showed that the HIPS appeared only in Pd-0.05Co alloy. For Pd-Co alloys with various composition the PC isotherms were measured. By adopting Park-Flanagan model for ternary thermodynamics the Gibbs free energy change for Pd-Co-H solid solution was calculated and subsequently with this the HIPS in Pd-Co alloy was explained fairly.
  6. Ahn, S.S.;Ko, H.S. 253
    PDF KSCI
    석유 연료 고갈 해결 및 온실 효과 가스 배풀 저감을 위한 방안으로 제시되는 수소는 다양한 에너지 저장체로 사용되어 질 수 있으나 안전성에 대한 연구가 요구되어진다. 따라서, 일반적인 저장 형태인 고압 저장 탱크에서 누출이 되었을 경우 분사되는 수소의 거동에 대한 연구가 이루어져야하며 이를 바탕으로 한 보완책이 제시되어야 한다. 이번 연구에서는 누설 시 확산되는 수소의 밀도를 실제 거동과 유사한 3차원 컴퓨터 영상장으로 합성한 후 ART(algebraic reconstruction technique) 및 MART(multiplicative ART)를 기반으로 한 3차원 디지털 스페클 토모그래피 기법을 개발하여 재건하고 분석하였다.
  7. Jeon, Eun;Cho, Young-Whan 262
    PDF KSCI
    [ $Zn(BH_4)_2$ ](8.4 wt% theoretical hydrogen storage capacity powders have been successfully synthesized by mechanochemical reaction from mixtures of $ZnCl_2$ and $NaBH_4$ powders in a 1:2 molar ratio in different times. $$ZnCl_2+2NaBH_4{\rightarrow}Zn(BH_4)_2+2NaCl$$ (1) $Zn(BH_4)_2$ powders were characterized by X-ray diffractometry(XRD), and Furier Transform Infrared spectrometry(FT-IR). The thermal stabilities of $Zn(BH_4)_2$ powders were studied by Differential scanning calorimetry(DSC), Thermogravimetry analysis(TGA), and Mass spectrometry(MS). $Zn(BH_4)_2$ can be tested for hydrogen evolution without further purification. The reaction to yield hydrogen is irreversible, the other products being compounds of Zn, and borane. $Zn(BH_4)_2$ thermally decomposes to release borane and hydrogen gas between about 85 and 150$^{\circ}C$.
  8. Kale, B.B.;Bae, Jin-Ook;Moon, Sang-Jin;Chang, Hyun-Ju;Lee, Chul-Wee 269
    PDF KSCI
    Zn, Bi 와 V 금속이온 전구체를 사용하여 모노클리닉 결정구조를 갖는 신규 ZnBiVO4 광촉매를 손쉽게 합성 할 수 있는 방법을 개발하였다. 합성된 $ZnBiVO_4$ 광촉매는 XRD 과 FESEM등을 이용하여 미세구조를 분석하였으며, 분석결과 본 삼성분계 금속산화물 반도체 광촉매는 모노클리닉 결정구조를 갖는 것을 알 수 있었다. 저온 수용액방법에 의해 손쉽게 나노 구조를 갖는 $ZnBiVO_4$가 제조되었으며, 그 광촉매의 최소 입자크기는 20-30 nm 이다. $ZnBiVO_4$ 광촉매는 UV-visible DRS (diffuse reflectance spectroscopy)로 그 띠간격(band gap)을 측정하였으며, FT-IR을 사용하여 구조 및 물질 상의 순도를 확인하였다. 그리고 $H_2S$를 광분해하여 수소를 발생하는($122ml/hr{\cdot}g$) 우수한 광촉매 활성을 보여 주었다.
  9. Choi, Weon-Kyung;Moon, Seung-Hvun;Cho, Tae-Hwan;Lee, Jae-Keun 277
    PDF KSCI
    Pretreatment procedure was investigated into brucite powders for mineral carbonation materials. Higher magnesium content was found from brucite powders and weight loss due to hydroxy group(-OH) elimination, explained by FT-IR spectra, was found after pretreatment. X-ray diffraction results showed that the crystallographic changing of brucite into magnesium oxides during pretreatment. XPS core spectra also showed chemical transformation of magnesium ingredient from hydroxides to oxide.
  10. Jung, Il-Kwon;Kang, Byung-Ha 284
    PDF KSCI
    Thermal analysis of cryogenic-capable vessels with insulations have been carried out to store liquid hydrogen($LH_2$). The combined insulations of MLI(Multi-Layer Insulation) and VCS(Vapor-Cooled Shield) under high vacuum are considered in the analysis for various volumes of vessels. Vapor-Cooled Shields(VCS) are installed at cylinder wall as well as disc side of the $LH_2$ vessels. The results indicate that optimal distribution of boiloff vapor from $LH_2$ vessel into two sides of VCS exists based on the evaporation loss. As the volume of $LH_2$ vessel is increased, mass flow rate of boiloff is increased while the evaporation loss per unit volume is decreased.
  11. Lee, H.S.;Lee, T.H. 290
    PDF KSCI
    For the application of fuel cell, the content and concentration of impurities in hydrogen stream must be classified. The purpose of this study is to provide analysis tool for the determination of impurities in hydrogen with ultra high purity. To produce UHT hydrogen, we purified hydrogen gas by both getter-based catridge and liquid-nitrogen soaked catridge. We compare two methods and propose new method to know about what is in hydrogen stream.
  12. Choi, Hyun-Do;Lee, Min-Kyu;Park, Sang-Ook 296
    PDF KSCI
    최근 수소에너지가 환경문제를 해결해 줄 수 있는 대체에너지로 각광받으면서 수소에너지의 사용이 가지고 올 새로운 에너지 체제에 대한 시나리오 연구가 다양하게 수행되고 있다. 수소 기술-경제체제의 가능한 시나리오를 제시하는 것은 미래 사회에서 수소가 에너지 운반체로서 담당하게 될 역할을 명확히 할 수 있음과 동시에 에너지라는 거대한 기술-경제체제의 변화를 위해 현재 수행해야 할 에너지 정책과 전략에 대해 큰 시사점을 줄 수 있기에 의미가 있다. 본 연구는 수소의 생산, 저장 및 운반, 그리고 응용분야에서의 다양한 기술의 SWOT 분석을 통해 가능한 시나리오를 단기와 장기로 나누어 제시했다. 그 결과 앞으로의 수소 기술-경제체제의 구조는 기술적 완성도 뿐 아니라 사회적 수용성, 사회적 적응성 등 외부의 환경변화에도 많은 영향을 받음을 알았다. 그렇기 때문에 수소에너지에 관한 전략과 정책은 이러한 변동을 충분히 고려하면서 결정돼야 한다.