Browse > Article

A Numerical Study on a High-Temperature Air Combustion Burner for a Compact Fuel-Cell Reformer  

Lee, Kyoung-Ho (School of Mechanical Engineering, Sungkyunkwan University)
Kwon, Oh-Chae (School of Mechanical Engineering, Sungkyunkwan University)
Publication Information
Transactions of the Korean hydrogen and new energy society / v.16, no.3, 2005 , pp. 229-237 More about this Journal
Abstract
A new burner configuration for a compact fuel-cell reformer with a high-temperature air combustion concept was numerically studied. The burner was designed for a 40 $Nm^3/hr$ hydrogen-generated reformer using natural gas-steam reforming method. In order to satisfy the primary requirements for designing a reformer burner (uniform distribution of temperature along the fuel processor walls and minimum heat losses from the reformer), the features of the present burner configuration included 1) a self-regenerative burner for an exhaust-gas-recirculation to apply for the high-temperature air combustion concept, and 2) an annular-type shield for protecting direct contact of flame with the processor walls. For the injection velocities of the recirculated gas of 0.6-2.4 m/s, the recirculated gas temperature of 1000 K, and the recirculated oxygen mole fraction of 4%, the temperature distributions along the processor walls were found uniform within 100 K variation. Thus, the present burner configuration satisfied the requirement for reducing temperature gradients along the processor walls, and consequently demonstrated that the high-temperature air combustion concept could be applied to the practical fuel reformers for use of fuel cells. The uniformity of temperature distribution is enhanced as the amount of the recirculated gas increases.
Keywords
High-Temperature Air Combustion; Exhaust Gas Recirculation; Natural Gas/Steam Reforming; Compact Reformer; Fuel Cells;
Citations & Related Records
연도 인용수 순위
  • Reference
1 J. N. Armor: 'The Multiple Roles for Catalysis in the Production of H2', Applied Catalyst A: General, Vol. 176, No. 2, 1999, pp. 159-176   DOI   ScienceOn
2 W. L. Yoon and D. S. Sea: 'Development of Compact NG steam Reforming System For H2-fueling Station' (in Korean), Workshop of Hydrogen Energy R&D Center, Vol.1, No.1, 2004, pp .3-7
3 J. B. Claridge, A. P. E. York, A. J. Brungs, C. M. Alvarez, J. Sloan, S. C. Tsang, and M. L. H. Green: 'New Catalysts for the Conversion of Methane to Synthesis Gas: Molybdenum and Tungsten Carbide', Journal of Catalysis, Vol. 180, 1998, pp. 85-100   DOI   ScienceOn
4 J. P. Vandoormaal and G. D. Raithby: 'Enhancements of the SIMPLE Method for Predicting Incompressible Fluid Flows', Numerical Heat Transfer, Vol. 7, 1984, pp. 147-163   DOI   ScienceOn
5 H. Tsuji, A. K. Gupta, T. Hasegawa, M. Katsuki, K. Kishimoto, and M. Morita: 'High Temperature Air Combustion: from Energy Conservation to Pollution Reduction', CRC Press, New York, U.S.A., 2003, pp. 29-48
6 M. U. Kang: 'A Study on Combustion Characteristics of the Self Regenerative Low NOx Burner', Master Degree Thesis, Seoul National University, Korea, 2003, pp. 4-10
7 A. Lokur1u, T. Grube, B. Hohlein, and D. Stolten: 'Fuel cells for mobile and stationary applications - cost analysis for combined heat and power stations on the basis of fuel cells', International Journal of Hydrogen Energy, Vol. 28, 2003, pp. 703-711   DOI   ScienceOn
8 Fluent Inc., Fluent 6.0 User's Guide, December 2001
9 F. J. Weinberg: 'Heat re-circulating burners: principles and some recent developments', Combustion Science and Technology, Vol. 121, 1996, pp. 3-22   DOI   ScienceOn
10 V. DuPont, M. Pourkashanian, and A. Williams: 'Modeling of Process Heaters Fired by Natural Gas', Journal of Institute of Energy, Vol. 73, 1993, pp 20-29
11 P. Cheng: 'Two-Dimensional Radiating Gas Flow by a Moment Method', AIAA Journal, Vol. 2, 1964, pp. 1662-1664   DOI
12 J. Pina, V. Bucala, and D. O. Borio: 'Optimization of Steam Reformers: Heat Flux Distribution and Carbon Formation', Internationa Journal of Chemical Reactor Engineering, Vol. 1, 2003, A25
13 B. F. Magnussen and B. H. Hiertager: 'On Mathematical Models of Turbulent Combustion with Species Emphasis on Soot Formation and Combustion', Proceedings of the Combustion Institute, Vol. 16, 1976, pp. 719-729