Due to COVID-19, Correct method of wearing mask is important to prevent COVID-19 and the other respiratory tract infections. And the deep learning technology in the image processing has been developed. The purpose of this study is to create the type of mask wearing dataset for deep learning models and select the deep learning model to detect the wearing mask correctly. The Image dataset is the 2,296 images acquired using a web crawler. Deep learning classification models provided by tensorflow are used to validate the dataset. And Object detection deep learning model YOLOs are used to select the detection deep learning model to detect the wearing mask correctly. In this process, this paper proposes to validate the type of mask wearing datasets and YOLOv5 is the effective model to detect the type of mask wearing. The experimental results show that reliable dataset is acquired and the YOLOv5 model effectively recognize type of mask wearing.

In this study, it is intended to provide basic data that can help develop a cardiovascular simulator for performance evaluation of pulse wave detectors by identifying the development status of domestic and overseas cardiovascular simulators. A total of 119 papers were selected by excluding duplicate literature, gray literature, and literature not related to a cardiovascular simulator. Based on the selected literature, the research trend of cardiovascular simulators was analyzed. As a result of analyzing the purpose of the study, most of the simulators were developed to evaluate the hemodynamic properties of artificial hearts and valves. In addition, it was used for simulation evaluation or hemodynamic studies such as pulse wave studies. As a result of analyzing configurations of the simulators, a heart most often consisted of only one left ventricle. For blood vessels, the Windkessel model was most often constructed using chambers and valves. In most studies, blood was reproduced by mixing glycerin and water to reproduce both density and viscosity. In addition, as a result of analysis from the perspective of medical device performance evaluation, simulators for evaluating artificial heart and artificial valves have been studied a lot, whereas simulators for blood pressure, pulse wave, and blood flow devices have been relatively insignificant. Based on the review results, we suggested considerations when developing a simulator for performance evaluations of a pulse wave detector.

This research is to measure real-time temperature distribution inside a tissue-mimicking phantom for the safety and effectiveness evaluations of focused ultrasound (FUS) device capable of linear scanning stimulation. Since the focusing area of the FUS stimulation device is smaller than diameter of conventional thermal probe and keeps moving, it is impossible to monitor temperature distribution inside the phantom. By using the phantom with a thin film temperature sensor array inserted, real-time temperature change caused by the FUS device was measured. The translation of the measured temperature peak was also tracked successfully. The present phantom had been experimentally proven to be applicable to validate the performance and safety of the therapeutic ultrasound devices.

As new types of medical devices are emerging through convergence with advanced technology, innovative technologies are becoming hot issues in health policy because of their disruptiveness. This study analyzed the innovative medical device management systems in the US, China and Korea. Innovative medical devices have been defined differently depending on the country's management system, but in common, they are defined as products that do not exist or have dramatically improved performance compare to existing products by applying innovative technologies. Innovative medical devices have been supported by regulatory authorities during product development and approval processes. While the US and China have more than 300 products designated as innovative medical devices with diverse functions, application fields, and manufacturing countries considering the initial situation of the implementation for the system, Korea has only 16 products, mainly radiology and diagnostic devices and made in Korea only as innovative medical device. In addition, Korea shows the highest market approval rate of innovative medical devices compare to the US and China, and it is necessary to prepare the approval process in consideration of product diversity.

Engagement is an important factor in the field of rehabilitation as it is a known factor that have a positive influence on functional gaining in people who receive rehabilitation therapy. Although a number of measurements for engagement have been recently developed, investigation of possible factors that may have influence on engagement is not well established. Currently available evidence suggests that engagement is affected by mood and it is hypothesized that a personal factor may contribute to engagement. Therefore, this study aims to test the hypothetical relationship between mood and engagement while performing a manual dexterity task through an experiment in healthy participants prior to investigation on people with medical condition who requires rehabilitation therapy. After inducing target mood (positive or negative mood) for study participants by asking them to recall autobiographical memories, change in muscle activity, which was operationalized as an indicator of engagement, was investigated. Electromyogram (EMG) was recorded from four muscle areas in non-dominant hand side to quantify muscle activity. The results show that the target moods were appropriately induced with the method. Although there were subtle differences in the level of engagement between different moods, certain variables derived from muscle activity were significantly different; mean amplitude for wrist extensor EMG showed significant difference between different moods (Z = -2.023, p < .05) indicating that muscle activities in the wrist extensor are greater for positive mood than negative mood region during manual dexterity task. Meanwhile, performance outcomes of Minnesota Manual Dexterity Test (MMDT), such as mean completion time and number of errors, between moods showed no significant difference in two different moods, resulting in MMDT administration may not be useful task in distinguishing the level of rehabilitation engagement.

Cell separation from a heterogenous mixture sample is an essential process for downstream analysis in biological, chemical, and clinical applications. This study demonstrates an integrated hybrid device of the viscoelastic focusing in a straight rectangular channel and subsequent size-based separation using acoustophoresis to attain high efficiency and separation tunability. For particle pre-alignment in a viscoelastic fluid, the flow rate higher than 10 μl/min was required. Surface acoustic wave-based lateral migration of particles with different sizes (13 and 27 ㎛) was examined at various applied voltages and flow rate conditions. Therefore, the flow rate of 100 μl/min and the applied voltage of 20 V_pp can be used for size-based particle separation.

The purpose of this study was to present the IMU sensor based trunk stabilization exercise and to evaluate the changes in the muscle activity and thickness with non-specific low back pain patients (N=30). They were classified into two groups; lumbar stabilization exercise using IMU sensor (ILS), (n₁=20) and general lumbar stabilization exercise (GLS), (n₂=10). By comparing the difference between pre and post intervention via trunk muscle activity and muscle thickness, the significant differences were identified. Muscle activity was measured on external oblique (EO), internal oblique (IO), and multifidus (MF) by using surface electromyography (sEMG). Muslce thickness was measured on external oblique, internal oblique, transverse abdominis (TrA), and multifidus (MF) by using ultrasonography. sEMG activity was recorded at right side-bridge position. Each group performed the proposed lumbar stabilization exercise for 30 minutes a day, 5 times a week for 4 weeks. Trunk muscle activity was observed with a significant increase in the IO of ILS (p<.05) and a decrease in the MF of GLS (p<.05). Trunk muscle thickness was significantly increased in left EO and both IO of GLS (p<.05), and also significant increased right EO, both IO, both TrA, and both MF of the ILS (p<.05). In the future, a convergence approach of rehabilitation and engineering is needed to select a sensor suitable for rehabilitation purposes, study the validity and reliability of data, and produce appropriate rehabilitation contents.