DOI QR코드

DOI QR Code

경사면에 구멍이 있는 판재 부품의 프레스 드로잉에 관한 연구

A Study on the Press Drawing of a Sheet Metal Part with Holes on the Slope

  • 이지호 (경상국립대학교 대학원 융합기계공학과) ;
  • 전차수 (경상국립대학교 산업시스템공학부, 공학연구원)
  • Lee, Ji-Ho (Department of Convergence Mechanical Engineering, Gyeongsang National University) ;
  • Jun, Cha-Soo (Department of Industrial and Systems Engineering & Engineering Research Institute, Gyeongsang National University)
  • 투고 : 2021.08.02
  • 심사 : 2021.08.23
  • 발행 : 2021.10.30

초록

In this study, to create circular holes on an inclined conic face, we developed a novel process of vertical piercing on the plane before drawing, instead of applying an expensive cam-piercing method. The pierced holes are deformed during the drawing, and their shapes are affected by the size of the center hole. Using the Abaqus CAE program, the deformation tendency of the holes, according to the diameter of the center hole, was identified, and the diameter for securing the roundness of the side holes were determined through actual experiments. The developed process was successfully applied to mass production of the part, and a cost reduction is expected.

키워드

참고문헌

  1. Kim, M. J., Oh, W. J., Shin, D. C. and Lee, C. M., "A Study on the Development of Forming Process for a Compressor Shell Body," Journal of the Korean Society for Precision Engineering, Vol. 33, No. 8, pp. 635-640, 2016. https://doi.org/10.7736/KSPE.2016.33.8.635
  2. Choi, J. M. and Kim, J. H., "Dimensional Accuracy of Cylindrical Cups in Multi-Stage Drawing of Aluminum Sheet Metal," Transactions of Materials Processing, Vol. 24, No. 2, pp. 115-120, 2015. https://doi.org/10.5228/KSTP.2015.24.2.115
  3. Shin, G. S., Park, J. G., Kim, J. H., Kim, Y. S., Park, Y. H. and Park, N. K., "Effect of Processing Conditions on the Deep Drawability of Ti-6Al-4V Sheet at Warm Temperatures," Transactions of Materials Processing, Vol. 24, No. 1, pp. 5-12, 2015. https://doi.org/10.5228/KSTP.2015.24.1.5
  4. Kim, Y. S. and In, J. H., "Evaluation of Press Formability of Pure Titanium Sheet," Journal of the Korea Academia-Industrial cooperation Society, Vol. 17, No. 3, pp. 380-388, 2016. https://doi.org/10.5762/KAIS.2016.17.3.380
  5. Lee, C. K. and Kim, Y. C., "A Study on Changes in Thickness of STS304 Material in the Progressive Drawing Process," Arch. Metall. Mater., Vol. 62, No. 2, pp. 1319-1323, 2017. https://doi.org/10.1515/amm-2017-0201
  6. Park, J. W., Ku, T. W. and Kang, B. S., "Numerical Simulation for a Multi-Stage Deep Drawing of Anisotropic SUS409L Sheet into a Rectangular Cup," Transactions of Materials Processing, Vol. 22, No. 3, pp. 133-142, 2013. https://doi.org/10.5228/KSTP.2013.22.3.133