Journal of the Korean Society of Manufacturing Process Engineers (한국기계가공학회지)

The Korean Society of Manufacturing Process Engineers (한국기계가공학회)
권호 표지
DOI QR코드

DOI QR Code

The Effect of Surface Roughness on Cutting Tool Shape in CNC Lathe C-Axis Turn-mill Machining

CNC선반 C축 Turn-mill 가공에 있어서 절삭공구형상이 표면 거칠기에 미치는 영향

  • Lee, Soon-kwan (Department of Computer Applied Mechanical, Wonju Campus of Korea Polytechnic)
  • 이순관 (한국폴리텍대학 원주캠퍼스 컴퓨터응용기계과)
  • Received : 2017.05.31
  • Accepted : 2017.08.04
  • Published : 2017.08.31
Download PDF
⟨ Previous Next ⟩

Abstract

Since the aircraft parts industry is a high-value-added industry, mass production order production, and the hundreds of thousands. Therefore, parts produced However, since these parts require high reliability and stability, a high degree of precision is required. In Korea, there on the roughness of the machined surface in cutting process. However, research on the surface roughness characteristic obtained by which is widely used for aircraft parts is still insufficient in Korea. The purpose of this study is to investigate the effect of turning tool rotation speed and X axis feed rate on the surface roughness of cutting tools in CNC lathes during cutting of aluminum alloy 7075.

Keywords

References

  1. Lee, S. J., Park, W. K., Lee, S. T., Lee, W. Y. and Ha, M. K., "Characteristics of Heat Generation in Time of High-speed Machining Using Infrared Thermal Imaging Camera," Journal of the Korean Society of Manufacturing Process Engineer, Vol. 2, No. 3, pp. 26-33, 2003.
  2. Lee, S. J., "A Study on Evaluation of Tool Performance and Novel Grinding Wheel Development for High Speed Milling," Dr. Degree Paper, Pukyong National University, pp. 25-26. 2007.
  3. Bae, J. C., Hwang, I. O., Kang, I. S., Kim, J. S. and Kang, M. C., "Environmentally Conscious High Speed Machining Characteristics of Aluminum Alloys (AC4C.1)," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 3, No. 1, pp. 22-27, 2004.
  4. Shin, K. S. "Effect of Surface Roughness on Cutting Conditions in CNC lathe C-Axis Milling Arc Cutting," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 13, No. 4, pp. 99-105. 2014. https://doi.org/10.14775/ksmpe.2014.13.4.099
  5. Kim, C. Y., Lee, H. C. "A Study on the Surface Roughness Characteristics of Al 5052 in Machining Center Processing," Proceedings of the KSMPE Spring Conference 2017, pp. 214. 2017
  6. Kwon, D. K., Kim, H. K., Kang, S. W., "A Study of the effectives for Surface Roughness by cutting angle and cutting fluid," Proceedings of the KSMPE Autumn Conference 2016, pp. 52 2016
  7. Park, H. Y., Bae, M. W., Jung, H., Kang, M. S., Effect of Cooling Method on Surface Roughness in High-speed Machining, 2010 KSAE Annual Conference and Exhibition, pp.2679-2684, 2010.
  8. Park, H. Y., Bae, M. W. and Jung, H., Effect of Cutting Depth on Surface Roughness of Al Alloy 7075 in High-speed Machining, 2011 KSAE Annual Conference and Exhibition, pp.2442-2446, 2011.
  9. Bae, M. W., Park, H. Y. and Jung, H., A Study on the Optimal Cutting Depth upon Surface Roughness of Al Alloy 7075 in High-speed Machining, Transactions of the KSAE, Vol.21, No.5, pp.74-78, 2010.