Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

Analysis Method for Integrating Components of Product

제품의 구성 부품들을 통합시키기 위한 분석 방법

  • Received : 2016.07.23
  • Accepted : 2017.01.02
  • Published : 2017.04.01
Download PDF
⟨ Previous Next ⟩

Abstract

This paper presents some of the methods used to incorporate the parts constituting a product. A new relation function concept and its structure are introduced to analyze the relationships of component parts. This relation function has three types of information, which can be used to establish a relation function structure. The relation function structure of the analysis criteria was established to analyze and present the data. The priority components determined by the analysis criteria can be integrated. The analysis criteria were divided based on their number and orientation, as well as their direct or indirect characteristic feature. This paper presents a design algorithm for component integration. This algorithm was applied to actual products, and the components inside the product were integrated. Therefore, the proposed algorithm was used to conduct research to improve the brake discs for bicycles. As a result, an improved product similar to the related function structure was actually created.

본 논문에서는 제품을 구성하는 부품들을 통합시키기 위한 방법을 제안하였다. 제품을 구성하는 부품들의 관계를 분석하기 위하여 '관계기능'과 '관계기능구조'라는 새로운 개념을 도입하였다. 관계기능은 세 가지의 정보를 갖고 있으며 이것으로부터 관계기능구조를 정립할 수 있다. 정립된 관계기능구조를 부품 통합가능성의 관점에서 분석하기 위한 분석기준을 정립하고 제시하였다. 이 분석기준에 의하여 구성부품들이 통합될 수 있는 우선순위가 결정된다. 분석기준은 관계기능의 개수와 방향성, 직간접성의 세가지로 구분된다. 또한 본 논문에서는 부품통합을 위한 설계 알고리즘을 제안하였다. 이 알고리즘을 실제 제품에 적용하여 구성부품이 통합된 새로운 제품 개념안(design concept)을 도출하였다. 제시된 알고리즘을 이용하여 자전거용 브레이크 디스크 결합방식과 삼공천공기를 개선하기 위한 연구를 진행하였다. 그 결과 실제로 존재하는 개선된 제품과 유사한 관계기능구조가 만들어질 수 있음을 확인하였다.

Keywords

References

  1. Boothroyd, G. and Dewhurst, P., 2002, Product Design for Manufacture and Assembly, 2nd Edition, Marcel Dekker, pp. 5-6.
  2. Lee, K. S., 2002, "Design For Manufacture and Assembly (DFMA)," Transactions of the Society of CAD/CAM Engineers, Vol. 8, No. 3, pp. 40-51.
  3. An, J. H., 2002, "DMFA Related Software and Impact on the us Manufacturing Industry," Transactions of the Society of CAD/CAM Engineers, Vol. 8, No. 3, pp. 32-39.
  4. Kim, I. H., 1999, "Outline and Application of DFMA," Transactions of the Society of CAD/CAM Engineers, Vol. 5, No. 1, pp. 31-34.
  5. Bariani, P. F., Berti, G. A. and Lucchetta, G., 2004, "A Combined DFMA and TRIZ Approach to the Simplification of Product Structure," Proc. Instn Mech. Engrs, Vol. 218, Part B: J. Engineering Manufacture, pp. 1023-1027.
  6. Pahl, G. and Beitz, W., 1998, Engineering Design, Dongmyungsa, Paju-si Gyeonggi-do Korea, pp. 31-32.
  7. Choi, J. H. and Lee, K. S., 2010, "Study on Concept Design of the Motor Actuator of Outside Rear-View Mirror by Incomplete Coupled Design," Trans. Korean Soc. Mech. Eng. A, Vol. 34, No. 12, pp. 1843-1848. https://doi.org/10.3795/KSME-A.2010.34.12.1843
  8. Choi, J. H. and Lee, K. S., 2008, "A Study on the Design Hypothesis of Integrated Part for Product Improvement," KSME 2008 Fall Annual Meeting, pp. 1176-1180.
  9. Choi, J. H. and Lee, K. S., 2009, "A Study on the Coupled Design of Concept Design by the Design Hypothesis of Integrated Part," KSME 2009 Fall Annual Meeting, pp. 1231-1236.