폴리머 (Polymer(Korea))

  • 제38권4호
  • /
  • Pages.441-448
  • /
  • 2014
  • /
  • 0379-153X(pISSN)
  • /
  • 2234-8077(eISSN)
한국고분자학회 (The Polymer Society of Korea)
권호 표지
DOI QR코드

DOI QR Code

H2O로 발포된 멜라민포스페이트-폴리우레탄폼 복합체 합성과 열적 특성 분석

Synthesis of Melamine Phosphate-Polyurethane Composite Foam Blown by Water and Characterization of Its Thermal Properties

  • Park, Kyeong-Kyu (Department of Chemical Engineering, Dong-A University) ;
  • Lee, Sang-Ho (Department of Chemical Engineering, Dong-A University)
  • 투고 : 2013.12.11
  • 심사 : 2014.03.20
  • 발행 : 2014.07.25
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

멜라민포스페이트(MP)가 분산된 폴리우레탄폼 복합체(MP-PUF)를 만들고, MP-PUF의 모폴로지, 독립기포율, 열전도율, 열분해온도 등을 분석하였다. MP-PUF는 MP가 분산된 폴리아디페이트디올(f=2), 폴리에테르-폴리올(f=4.6)과 PMDI(f=2.5)를 원료로 사용하고 발포제로 $H_2O$ 양을 변화시키며 제조하였다. 폴리우레탄폼의 MP 함량은 $1.43{\pm}0.30wt%$로 고정하였다. $H_2O$의 양이 증가할수록 순수한 폴리우레탄폼(PUF)의 열전도율은 낮아지고 MP-PUF의 열전도율은 커졌다. PUF와 MP-PUF의 열안정성은 $H_2O$ 양이 5 php에서 최대가 되었다가 그 이상에서는 낮아졌다. 특히, MP-PUF는 발포과정에 생성된 우레아기와 MP의 영향으로 열안정성이 크게 향상되어 MP-PUF의 잔량이 50%가 되는 온도가 $370{\sim}450^{\circ}C$, 잔량이 30%가 되는 온도는 $700^{\circ}C$ 이상으로 PUF에 비하여 각각 25, $70^{\circ}C$ 이상 높아졌다.

Polyurethane/melamine phosphate composite foam (MP-PUF) was prepared from poly(adipate)diol/melamine phosphate composite (f=2), polyether-polyol (f=4.6), and PMDI (f=2.5). The thermal properties of MP-PUF such as morphology, closed-cell content, thermal conductivity, and thermal stabilities were characterized. Water was used as a blowing agent, and the composition of melamine phosphate (MP) was maintained at $1.43{\pm}0.3wt%$ of MP-PUF. As the content of water increased, the thermal conductivity of pure polyurethane foam (PUF) decreased, whereas the thermal conductivity of MP-PUF increased. The thermal stabilities of the PUF and the MP-PUF were maximized at 5 php $H_2O$, and then decreased at the higher $H_2O$ contents. The thermal stabilities of MP-PUF were greatly enhanced due to the synergetic effect of MP and urea, which was generated during the blowing process. The temperature of 50% residual mass of MP-PUF increased to $370{\sim}450^{\circ}C$ and the temperature of 30% residual mass exceeded over $700^{\circ}C$. Compared to the PUF, the temperature of 50% residual mass and 30% residual mass were higher than 25 and $70^{\circ}C$, respectively.

키워드

과제정보

연구 과제 주관 기관 : 동아대학교

참고문헌

  1. S. S. Kim and J. N. Park, Polym. Sci. Tech., 10, 614 (1999).
  2. U. Jarfelt and O. Ramnas, The 10th International Symposium on District Heating and Cooling, September 3-5, Hanover (2006).
  3. H. Lim, S. H. Kim, and B. K. Kim, J. Appl. Polym. Sci., 110, 49 (2008). https://doi.org/10.1002/app.28571
  4. H. Lim, S. H. Kim, and B. K. Kim, Polym. Adv. Technol., 19, 1729 (2008). https://doi.org/10.1002/pat.1188
  5. S. H. Kim, M. C. Lee, H. D. Kim, H. C. Park, H. M. Jeong, K. S. Yoon, and B. K. Kim, J. Appl. Polym. Sci., 117, 1992 (2010). https://doi.org/10.1002/app.32116
  6. W. J. Seo, Y. T. Sung, S. B. Kim, K. H. Choe, J. Y. Sung, and W. N. Kim, J. Appl. Polym. Sci., 102, 3764 (2006). https://doi.org/10.1002/app.24735
  7. M. C. Saha, Md. E. Kabir, and S. Jeelani, Mater. Sci. Eng. A, 479, 213 (2008). https://doi.org/10.1016/j.msea.2007.06.060
  8. C. B. Kim, W. J. Seo, O. D. Kwon, and S. B. Kim, Appl. Chem. Eng., 22, 540 (2011).
  9. A. Lorenzetti, M. Modesti, S. Besco, D. Hrelja, and S. Danadi, Polym. Degrad. Stabil., 96, 1455 (2011). https://doi.org/10.1016/j.polymdegradstab.2011.05.012
  10. K. K. Park and S. H. Lee, Elastom. Compos., 46, 343 (2011).
  11. L. Shufen, J. Zhi, Y. Kaijun, and Y. Shuqin, Polym. Plast. Technol. Eng., 45, 95 (2006). https://doi.org/10.1080/03602550500373634
  12. M. Thirumal, D. Khastgir, G. B. Nando, Y. P. Naik, and N. K. Singha, Polym. Degrad. Stabil., 95, 1138 (2010). https://doi.org/10.1016/j.polymdegradstab.2010.01.035
  13. A. B. Morgan and C. A. Wilkie, Flame Retardant Polymer Nanocomposites, John Wiley & Sons Inc, New Jersey, USA, 2007.
  14. G. Camino, L. Costa, and G. Martinasso, Polym. Degrad. Stabil., 23, 359 (1989). https://doi.org/10.1016/0141-3910(89)90058-X
  15. S. Bourbigot, M. L. Bras, R. Delobel, P. Brant, and J. M. Trmillon, Carbon, 33, 283 (1995). https://doi.org/10.1016/0008-6223(94)00131-I
  16. S. Jahromi, W. Gabrielse, and A. Braam, Polymer, 44, 25 (2003). https://doi.org/10.1016/S0032-3861(02)00686-9

피인용 문헌

  1. 나노기포 적용 수발포 경질 폴리우레탄 폼의 물성 연구 vol.42, pp.2, 2014, https://doi.org/10.7317/pk.2018.42.2.215