초록
본 연구에서는 두께가 다른 비정질 CoFeB 박막 재료에서 측정한 강자성 및 스핀파 공명 신호를 비교 분석하였다. 강자성 공명 자기장($H_{FMR}$)은 두께에 거의 무관하게 일정한 값을 갖는 반면 스핀파 공명 자기장($H_{SWR}$)은 CoFeB의 두께에 의존하는 스핀파 모드들에 대한 이론 값과 일치하였다. 수평면에서 자기장 각도에 따른 $H_{FMR}$ 측정 결과로부터 CoFeB 재료의 일축이방성 자기장은 37 Oe였다. 한편 $H_{SWR}$은 $H_{FMR}$과 동일한 각도 의존성을 보였으며, 스핀파 공명 신호의 크기는 강자성 공명 신호에 비하여 약 5.7배 증가하였다. 이러한 증가는 비정질 재료의 작은 감쇠 상수에 의한 저감이 작은 스핀파의 진행 특성 및 균일한 자화에 의한 이상적인 정상파 형성 조건에 기인함을 알 수 있었다.
We analyzed the ferromagnetic and spin wave resonance signals measured in amorphous CoFeB thin films with different thickness. The ferromagnetic resonance field ($H_{FMR}$) was not depend on the thickness of CoFeB films, but the spin wave resonance field ($H_{SWR}$) was well fitted with the theoretical prediction depending on the thickness. The uniaxial anisotropy field of $H_k$ = 37 Oe was obtained from the angular dependent $H_{FMR}$ in CoFeB films. The $H_{SWR}$ showed same angular behaviors with $H_{FMR}$, however, the amplitude of spin wave resonance signals showed 5.7 times higher than that of ferromagnetic resonance signals in CoFeB film with t = 100 nm. The higher signals were due to the two reasons; one was the small damping for the spin wave propagation without degradation, the other was uniform magnetization for the ideal standing wave modes.