DOI QR코드

DOI QR Code

매트 형태의 예혼합 촉매 버너에 의한 복사 건조 특성

Drying Characteristics of a Radiative Industrial Dryer Adopting a Mat-Type Premixed Catalytic Burner

  • 김혁주 (한국에너지기술연구원) ;
  • 안준 (국민대학교 기계시스템공학부) ;
  • 송광섭 (한국에너지기술연구원)
  • 투고 : 2010.08.31
  • 심사 : 2011.04.14
  • 발행 : 2011.07.01

초록

인체에 유해한 질소산화물($NO_x$)의 생성을 억제하면서 열효율을 높일 수 있는 새로운 버너의 개념으로 촉매 버너가 제안되었고 본 연구에서는 대표적인 에너지 다소비 설비인 건조기에 사용하기 위한 촉매버너를 개발하였다. 산업용 건조기에 활용하기 위해 촉매버너는 평평한 매트 형태로 제작되어 열전달 면적을 극대화하였고 밀폐 공간인 건조실에 활용하기 위하여 예혼합 연소방식을 적용하였다. 새로 개발된 촉매 버너를 산업용 건조기에 적용하여 실험한 결과 열에너지가 원적외선 형태로 공급되어 감율건조 영역에서 식품과 같은 유기물을 효과적으로 건조할 수 있음을 확인하였다. 또한 건조기의 열효율은 건조속도보다 피건조물의 함수율에 보다 큰 상관관계를 나타내었다.

A catalytic burner that utilizes the thermal energy from fossil fuels without the emission of nitrogen oxides ($NO_x$) has been developed. For this purpose, the newly developed burner has two features: firstly, it is in the shape of a flat mat so as to maximize its heating surface, and secondly, it adopts premixed combustion so that it can be used in a closed space. In the present study, the burner was used in a radiation-type industrial dryer. This dryer yields thermal energy in the form of thermal radiation in the infrared regime, which has been proved to be effective for drying organic substances under low-moisture conditions. Analysis of the experimental data has proved that the thermal efficiency of the dryer is better correlated to the moisture than to the dry rate

키워드

참고문헌

  1. Ahn, J., Kim, H. J. and Choi, K. S., 2010, "Combustion Characteristics of Non-premixed VIStA Burner in Once-Through-Type Boiler," Trans. of the KSME (B), Vol. 34, No. 5, pp. 547-552. https://doi.org/10.3795/KSME-B.2010.34.5.547
  2. Ro, S. and Scholten, A., 1999, "Catalytic Combustion in a Domestic Natural Gas Burner," Catalysis Today, Vol. 47, pp. 415-420. https://doi.org/10.1016/S0920-5861(98)00324-1
  3. Seo, Y. S., Kang, S. K. and Shin, H. D., 1998, "Combustion Characteristics of Lean Premixed Mixture in Catalytic Combustors," Trans. of the KSME (B), Vol. 22, No. 12, pp. 1681-1690.
  4. Hwang, C. H., Jeong, Y. S. and Lee, C. E., 2001, "Numerical Studies on Combustion Characteristics of a Hybrid Catalytic Combustor," Trans. of the KSME (B), Vol. 25, No. 4, pp. 583-592.
  5. Lee, K. H., Hong, Y. J. and Kim, O. J., 2006, "Analysis of Heat Transfer and Drying Characteristics in the Dryer Using the Refraction of Radiation," Trans. of the SAREK, Vol. 18, No.8, pp. 678-685.
  6. Land, C. M. v., 1991, Industrial Drying Equipment, Marcel Dekker Inc.
  7. Shin, H. I., 1998, Industrial Dryer, Daekwang.
  8. Song, K.S., Jung, N.J. and Kim, H.Y., 2008. "Combustion Characteristics and Design of Fiber Mat Catalytic Burners," KOSEE J. Energy Eng., Vol. 17, No. 2, pp.100-106.