한국가시화정보학회지 (Journal of the Korean Society of Visualization)

  • 제9권2호
  • /
  • Pages.34-39
  • /
  • 2011
  • /
  • 1598-8430(pISSN)
  • /
  • 2093-808X(eISSN)
한국가시화정보학회 (The Korean Society of Visualization)
권호 표지
DOI QR코드

DOI QR Code

곡면 유리 표면 위에서 박막 측온저항체 온도센서 어레이 제작 및 성능 평가

Fabrication and Performance Evaluation of Thin Film RTD Temperature Sensor Array on a Curved Glass Surface

  • 투고 : 2011.05.20
  • 심사 : 2011.06.10
  • 발행 : 2011.06.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This paper presents a novel direct fabrication method of the thin metal film RTD temperature sensor array on an arbitrary curved surface by using MEMS technology to measure a distributed temperature field up to $300^{\circ}C$ without disturbing a fluid flow. In order to overcome the difficulty in the three dimensional photography of sensor patterning, the UV pre-irradiated photosensitive dry film resist technology has been developed newly. This method was applied to the fabrication of the temperature sensor array on a glass tube, which is arranged parallel and transverse to a main flow. Gold was used as a temperature sensing material. The resistance change was measured in a thermally controlled oven by increasing the environmental temperature. The linear increase in resistance change and a constant slope were obtained. Also, the sensitivity of each RTD temperature sensor was evaluated.

키워드

참고문헌

  1. http://www.apiheattransfer.com.
  2. A. Datta, et al., 2006, "Batch Fabrication and Characterization of Micro-Thin-Film Thermocouples Embedded in Metal", Journal of The Electrochemical Society, Vol. 153, pp. H89-H93. https://doi.org/10.1149/1.2179218
  3. X. Zhang, et al., 2006, "Design, fabrication and characterization of metal embedded thin film thermocouples with various film thicknesses and junction sizes", Journal of Micromechanics and Microengineering, Vol. 16, pp. 900-905. https://doi.org/10.1088/0960-1317/16/5/004
  4. K. Kreider, 2009, "Thin film thermocouples for internal combustion engines", Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films, Vol. 4, pp. 2618-2623.
  5. K. G. Kreider and F. DiMeo, 1998, "Platinum palladium thin-film thermocouples for temperature measurements on silicon wafers", Sensors and Actuators A: Physical, Vol. 69, pp. 46-52. https://doi.org/10.1016/S0924-4247(97)01747-0
  6. S. P. Jang, et al., 2003, "Experimental investigation of thermal characteristics for a microchannel heat sink subject to an impinging jet, using a microthermal sensor array", Sensors and Actuators A: Physical, Vol. 105, pp. 211-224. https://doi.org/10.1016/S0924-4247(03)00103-1
  7. Frank P. Incropera, David P. DeWitt, 2001, "Introduction of the heat transfer 4th Edition", JohnWiley & Sons Inc, pp.370-406.
  8. Peter T. Ireland, et al., 1999, "Turbulent heat transfer measurements using liquid crystals", International Journal of Heat and Fluid Flow, Vol. 20, pp. 355-367. https://doi.org/10.1016/S0142-727X(99)00030-2
  9. Cheol Hyun Hong, et al., 2003, "Experimental Study on the Measurement Method of Heat Transfer Coefficients Using a Transient Liquid Crystal Technique", Journal of the Korean Society of Marine Engineers, Vol. 27, No.5, pp. 581-589.
  10. C. H. Ahn et al., 2010, "Fabrication and Performance Evaluation of Temperature Sensor Array on a 3-Dimensional Curved Surface", Proceedings of the 12th Korean MEMS conference, pp173-174.
  11. H. Schmidbaur, et al., 2005, "Understanding gold chemistry through relativity", Chemical physics, Vol. 311, pp. 151-161. https://doi.org/10.1016/j.chemphys.2004.09.023