DOI QR코드

DOI QR Code

Development of Safety Management Index for Contractor Assessment in Bidding Process

입찰단계 수급자 평가를 위한 안전경영지수 개발

  • 지성민 (서울시립대학교 대학원 건축공학과) ;
  • 구교진 (서울시립대학교 건축공학과) ;
  • 현창택 (서울시립대학교 건축공학과)
  • Received : 2010.12.30
  • Accepted : 2011.06.23
  • Published : 2011.11.30

Abstract

The construction industry is still the most risky industry and labor accident is a significant management factor on construction site. Safety management has been studied for improving the safety performance on construction sites. However, Almost all of them have been considered on the site safety management for the contractors and evaluation of accident rate. To resolve the limitation of current research, this study is focused on considering accident result and effort by performing the evaluation of safety level of the head office and site in construction companies. By studying the research about a safety management and interviewing with specialists in safety management, 7 items were selected and weighted based on the KOSHA18001 List. Consequently, The checklist was developed to evaluate safety performance management in construction company and Safety Management Index was suggested to coordinate 1) the score of results in accident rate and 2) the effort to evaluate a safety performance management. Safety Management Index is more helpful to evaluate the safety management results and effort. As a result of considering the score of the accident rate and the safety performance management, the outcome of prequalification was changed. Using this index, contractors will attempt to prevent accidents and owners will be able to discriminate individual differences in bidding process.

안전한 현장을 구축하기 위한 수급자의 노력에도 불구하고 건설업은 여전히 위험한 산업으로 인식되고 있다. 특히, 여러 항목 중에서도 노무자의 재해율은 건설현장에서 중대하게 고려되는 관리대상이다. 따라서 현재까지 진행된 건설 분야 안전에 관한 연구는 건설현장의 안전관리수준 개선에 초점을 두고 있으며, 과정보다는 결과를 평가하는 방식의 개발에 집중되었다. 그러나, 재해율을 낮추기 위한 수급자의 적극적인 노력을 이끌어내기 위해서는 입찰단계에서부터 재해율과 함께 안전관리수준이 평가되어야 한다. 본 연구에서는 현장의 사고결과만을 평가하는 기존의 안전관리평가의 한계점을 극복하고 수급자의 자발적인 재해예방 활동을 강화하기 위하여, 안전관리수준을 평가하는 체크리스트와 입찰단계에서 재해율과 재해예방노력을 동시에 평가할 수 있는 안전경영지수를 제안하였다. 개발된 안전경영지수를 활용하여 재해율과 안전관리수준을 동시에 평가할 수 있었으며, 지수의 효용성을 검증하기 위해서 32개의 수급자를 대상으로 실시되었던 입찰참가자격사전심사(Prequalification, 이하 PQ) 프로세스에 적용하였다. 적용 결과, 수급자의 점수가 세분화 되고, 순위가 변경되는 등 PQ 결과에 있어서 변별력이 발생하였다. 개발된 안전경영지수를 입찰단계 평가에 적용한다면, 수급자는 사고 예방을 위해서 더욱 노력할 것이며, 발주자는 입찰단계에서 변별력있는 평가항목으로 활용할 수 있을 것이다.

Keywords

References

  1. 공기석 (1999). SOC민간투자사업에 있어서의 효율적 위험관리에 관한 연구, 인하대학교 석사학위논문
  2. 권오규 (2003). 건설공사 안전관리 개선방안에 관한 연구, 울산대학교 석사학위논문
  3. 권정희 (2002). 수급자의 안전수준 향상전략에 관한 연구, 세명대학교 석사학위논문
  4. 김문한 외 공저 (1999). 건설경영공학, 기문당
  5. 김인호 (1999). 건설업의 리스크관리, 기문당
  6. 김인호 (1998). 건설경영과 의사결정, 기문당
  7. 김진호(2010)." 건설업안전사고의원인과사고발생원리의분석을 통한 안전관리 합리화 방안의 고찰", 한국건축시공학회지, 제10권 제3호, 한국건축시공학회, pp.99-111
  8. 문정호 (1996). 현행PQ제도의 문제점과 개선방안, 한국건설업연구원.
  9. 박준형 (1998). 건설공사 사전안전성 평가제도에 관한 연구, 한양대학교 석사학위논문
  10. 박남선 (2000). 건설안전활동 평가기준 개발에 관한 연구, 경희대학교 석사학위논문
  11. 박진우 (1997). 건설공사보험의 이해, 연암사
  12. 부추오 (1998). 건설공사 사전안전평가 프로세스, 중앙대학교 석사학위논문
  13. 손창백 (2002). "대형수급자 본사 및 현장의 안전관리수준 평가", 대한건축학회 논문집(구조계), 제18권 제6호, 대한건축학회, pp.135-142
  14. 안홍섭 (1993). 건설안전활동 평가기준 개발에 관한 연구, 한국산업안전공단
  15. 안홍섭 (2002)." 건설업체의 안전보건관리 수준평가 방안, 대한건축학회 논문집(구조계), 제18권 제1호, 대한건축학회, pp.105-112
  16. 이광표 (2010). "건설 안전관리를 위한 실시간 위치추적(RTLS) 기술 개발", 한국건설관리학회지, 제11권 제2호, 한국건설관리학회, pp.106-115
  17. 이종빈(2003)." 건설현장 안전관리수준 평가지수에 관한 연구", 대한건축학회 논문집(구조계), 제19권 제3호, 대한건축학회, pp.171-178
  18. 이찬식 (1994). 건설 프로젝트의 입찰참가자격사전심사를 위한 의사결정 방법에 관한 연구, 서울대학교 박사학위논문
  19. 이한식 (2001). 건설안전경영시스템 모델구축에 관한 연구, 중앙대학교 석사학위논문
  20. 정승우 (2010)." 초고층 건설현장의 USN기술 적용대상 분석 및 우선순위 도출", 대한건축학회 논문집(구조계), 제26권 제5 호, 대한건축학회, pp.117-124
  21. 최명일 (2002). 2단계 입찰참가자격사전심사 모델 개발에 관한 연구, 서울시립대학교 석사학위논문
  22. Halpin, D. and Woodhead, R. (1998). Construction Management, Wiley, p.285
  23. Haslam, R.. et al. (2005). "Contributing factors in construction accidents". Applied Ergonomics, 36(4), pp.401-415. https://doi.org/10.1016/j.apergo.2004.12.002
  24. Raymond, E. and Nancy, M. (1987). Construction Safety Management, McGraw-Hill
  25. Saaty, T. (1980). The Analytic Hierarchy Process, McGrew-Hill
  26. Zhang, J. and Hu, Z. (2011). "BIM- and 4D-based integrated solution of analysis and management for conflicts and structural safety problems during construction", AUTOMATION IN CONSTRUCTION, 20(2), pp.155-166 https://doi.org/10.1016/j.autcon.2010.09.013