참고문헌
- Han, J. C., Dutta, S. and Ekkad, S. V., 2000, "Gas Turbine Heat Transfer and Cooling Technology," Taylor & Francis, New York.
- Moon, H. K., O'Connel, T., and Glezer, B., 2000, "Channel Height Effect on Heat Transfer and Friction in a Dimpled Passage," American Society of Mechanical Engineers (ASME), International Gas Turbine and Aeroengine Congress and Exhibition, Indianapolis, Indiana, 99-GT-163.
- Mahmood, G. I., Hill, M. L., Nelson, D. L. and Ligrani, P. M., 2000, "Local Heat Transfer and Flow Structure on and above a Dimpled Surface in a Channel," American Society of Mechanical Engineers (ASME), Proceedings of ASME TURBO EXPO 2000, Munich, Germany, 2000-GT-230.
- Wang, Z., Yeo, K. S. and Khoo, B. C., 2003, "Numerical Simulation of Laminar Channel Flow over Dimpled Surface," 16th AIAA Computational Fluid Dynamics Conference 23-26 June 2003, Orlando, Florida, AIAA 2003-3964, pp. 1-11.
- Khalatov, A., Byerley, A., Ochoa, D. and Min, S. K., 2004, "Flow Characteristics within and Downstream of Spherical and Cylindrical Dimple on a Flat Plate at Low Reynolds," 2004, Power for Land, Sea, and Air, June 14-17, 2004, Vienna, Austria, GT2004-53656, pp.589-602.
- Shin, S. M., Lee, K. S., Park, S. D., and Kwak, J. S., 2009, "Measurement of the heat transfer coefficient in the dimpled channel: effects of dimple arrangement and channel height," Journal of Mechanical Science and Technology, 23 pp. 624-630. https://doi.org/10.1007/s12206-008-1211-1
- Han, J. C., Glicksman, L. R., Rohsenow, W. M., 1978, "An Investigation of Heat Transfer," Vol. 21, pp. 1143-1156. https://doi.org/10.1016/0017-9310(78)90113-8
- Park, J. S., Han, J. C., Huang, Y. and Ou, S., 1992, "Heat transfer performance comparisons of five different rectangular channels with parallel angled ribs," International Journal of Heat and Mass Transfer, Vol. 35, No. 11, pp. 2891-2903. https://doi.org/10.1016/0017-9310(92)90309-G
- Stephens, M. A., Shih, T. I-P. and Civinskas, K. C., 1995, "Effects of Inclined Rounded Ribs on Flow and heat Transfer in a Square Duct," 30th, AIAA Thermophysics Conference, June, 19-22, AIAA. 95-2115, pp. 1-12.
-
Al-Hadhrami, L., and Han, J. C., 2002, "Effect of Rotation on Heat Transfer in Two-pass Square Channels With Five Different Orientations of
$45^{\circ}$ Angled Rib Turbulators," International Journal of Heat and Mass Transfer, Vol. 46, pp. 653-669. - Liou, T.-M., Chang, S. W., Hung, J. H., and Chiou, S. F., 2007, "High Rotation Number Heat Transfer of A 45 degrees Rib-roughened Rectangular Duct With Two Channel Orientations," International Journal Heat and Mass Transfer, Vol. 50, pp. 4063-4078. https://doi.org/10.1016/j.ijheatmasstransfer.2007.01.060
- Harasgama, S. P., and Morris, W. D., 1988, "The Influence of Rotation on The Heat Transfer Characteristics of Circular, Triangular and Square-sectioned Coolant Passages of Gas Turbine Rotor Blades," ASME Jounal of Turbomachinery, Vol. 110, pp. 44-50. https://doi.org/10.1115/1.3262166
-
Iacovides, H., Jackson, D. C., Kelemenis G., Launder, B. E., and Yuan, Y.-M., 2001, "Flow and Heat Transfer in a Rotating U-bend With
$45^{\circ}$ Ribs," International Journal of Heat and Fluid Flow, Vol. 22, pp. 308-314. https://doi.org/10.1016/S0142-727X(01)00093-5 - Griffith, T. S., Luai Al-Hadhrami, and Han, J. C., 2002, "Heat Transfer in Rotating Rectangular Cooling Channels(AR=4) with Dimples.", American Society of Mechanical Engineers (ASME). Proceedings of ASME TURBO EXPO 2002, Amsterdam, Neterlands, GT-2002-30220.
- Kim, S., Lee, Y. J., Choi, E. Y., and Kwak, J. S., 2011, "Dimple Configuration on Heat Transfer Coefficient in a Rotating Channel.", Journal of Thermophysics and Heat Transfer, Vol. 25, No. 1, pp. 165-172. https://doi.org/10.2514/1.50255
- Kwak, J. S., 2008, "Comparison of Analytical Superposition Solutions of the Transient Liquid Crystal Technique.", Journal of Thermophsics and Heat Transfer, Vol. 22, No. 2, pp. 290-295. https://doi.org/10.2514/1.34274
- S. Wagner, M. Koulla, P. Ott, B. Weigand, and V. von Wolfersdorf, 2005, "The transient liquid crystal technique: Influence of surface curvature and finite wall thickness.", Journal of Turbomachinery, 127 pp. 175-182. https://doi.org/10.1115/1.1811089
- Moffat, R. J., 1988, "Describing the Uncertainties in Experimental Results.", Journal of Experimental Thermal and Fluid Science, 1, pp. 3-17. https://doi.org/10.1016/0894-1777(88)90043-X