1 |
Liou, T.-M., Chang, S. W., Hung, J. H., and Chiou, S. F., 2007, "High Rotation Number Heat Transfer of A 45 degrees Rib-roughened Rectangular Duct With Two Channel Orientations," International Journal Heat and Mass Transfer, Vol. 50, pp. 4063-4078.
DOI
|
2 |
Harasgama, S. P., and Morris, W. D., 1988, "The Influence of Rotation on The Heat Transfer Characteristics of Circular, Triangular and Square-sectioned Coolant Passages of Gas Turbine Rotor Blades," ASME Jounal of Turbomachinery, Vol. 110, pp. 44-50.
DOI
|
3 |
Iacovides, H., Jackson, D. C., Kelemenis G., Launder, B. E., and Yuan, Y.-M., 2001, "Flow and Heat Transfer in a Rotating U-bend With Ribs," International Journal of Heat and Fluid Flow, Vol. 22, pp. 308-314.
DOI
|
4 |
Griffith, T. S., Luai Al-Hadhrami, and Han, J. C., 2002, "Heat Transfer in Rotating Rectangular Cooling Channels(AR=4) with Dimples.", American Society of Mechanical Engineers (ASME). Proceedings of ASME TURBO EXPO 2002, Amsterdam, Neterlands, GT-2002-30220.
|
5 |
Kim, S., Lee, Y. J., Choi, E. Y., and Kwak, J. S., 2011, "Dimple Configuration on Heat Transfer Coefficient in a Rotating Channel.", Journal of Thermophysics and Heat Transfer, Vol. 25, No. 1, pp. 165-172.
DOI
|
6 |
Kwak, J. S., 2008, "Comparison of Analytical Superposition Solutions of the Transient Liquid Crystal Technique.", Journal of Thermophsics and Heat Transfer, Vol. 22, No. 2, pp. 290-295.
DOI
|
7 |
S. Wagner, M. Koulla, P. Ott, B. Weigand, and V. von Wolfersdorf, 2005, "The transient liquid crystal technique: Influence of surface curvature and finite wall thickness.", Journal of Turbomachinery, 127 pp. 175-182.
DOI
|
8 |
Moffat, R. J., 1988, "Describing the Uncertainties in Experimental Results.", Journal of Experimental Thermal and Fluid Science, 1, pp. 3-17.
DOI
|
9 |
Mahmood, G. I., Hill, M. L., Nelson, D. L. and Ligrani, P. M., 2000, "Local Heat Transfer and Flow Structure on and above a Dimpled Surface in a Channel," American Society of Mechanical Engineers (ASME), Proceedings of ASME TURBO EXPO 2000, Munich, Germany, 2000-GT-230.
|
10 |
Wang, Z., Yeo, K. S. and Khoo, B. C., 2003, "Numerical Simulation of Laminar Channel Flow over Dimpled Surface," 16th AIAA Computational Fluid Dynamics Conference 23-26 June 2003, Orlando, Florida, AIAA 2003-3964, pp. 1-11.
|
11 |
Khalatov, A., Byerley, A., Ochoa, D. and Min, S. K., 2004, "Flow Characteristics within and Downstream of Spherical and Cylindrical Dimple on a Flat Plate at Low Reynolds," 2004, Power for Land, Sea, and Air, June 14-17, 2004, Vienna, Austria, GT2004-53656, pp.589-602.
|
12 |
Stephens, M. A., Shih, T. I-P. and Civinskas, K. C., 1995, "Effects of Inclined Rounded Ribs on Flow and heat Transfer in a Square Duct," 30th, AIAA Thermophysics Conference, June, 19-22, AIAA. 95-2115, pp. 1-12.
|
13 |
Shin, S. M., Lee, K. S., Park, S. D., and Kwak, J. S., 2009, "Measurement of the heat transfer coefficient in the dimpled channel: effects of dimple arrangement and channel height," Journal of Mechanical Science and Technology, 23 pp. 624-630.
과학기술학회마을
DOI
|
14 |
Han, J. C., Glicksman, L. R., Rohsenow, W. M., 1978, "An Investigation of Heat Transfer," Vol. 21, pp. 1143-1156.
DOI
|
15 |
Park, J. S., Han, J. C., Huang, Y. and Ou, S., 1992, "Heat transfer performance comparisons of five different rectangular channels with parallel angled ribs," International Journal of Heat and Mass Transfer, Vol. 35, No. 11, pp. 2891-2903.
DOI
|
16 |
Al-Hadhrami, L., and Han, J. C., 2002, "Effect of Rotation on Heat Transfer in Two-pass Square Channels With Five Different Orientations of Angled Rib Turbulators," International Journal of Heat and Mass Transfer, Vol. 46, pp. 653-669.
|
17 |
Moon, H. K., O'Connel, T., and Glezer, B., 2000, "Channel Height Effect on Heat Transfer and Friction in a Dimpled Passage," American Society of Mechanical Engineers (ASME), International Gas Turbine and Aeroengine Congress and Exhibition, Indianapolis, Indiana, 99-GT-163.
|
18 |
Han, J. C., Dutta, S. and Ekkad, S. V., 2000, "Gas Turbine Heat Transfer and Cooling Technology," Taylor & Francis, New York.
|