실험계획법 중 Box-Behnken(박스-벤켄)법을 이용한 반응성 염료의 광촉매 산화조건 특성 해석 및 최적화

Analysis of Characteristics and Optimization of Photo-degradation condition of Reactive Orange 16 Using a Box-Behnken Method

  • 조일형 (서울대학교 보건대학원 환경보건학과) ;
  • 이내현 ((주) 전략 환경사업부) ;
  • 장순웅 (경기대학교 환경공학과) ;
  • 안상우 (한국건설기술연구소 국토환경연구부) ;
  • 윤영한 (한국건설기술연구소 국토환경연구부) ;
  • 조경덕 (서울대학교 보건대학원 환경보건학과)
  • Cho, Il-Hyoung (Institute of Health and Environment, and School of Public Health, Seoul National University) ;
  • Lee, Nae-Hyun (Department of Environmental Division, Strategy Engineering Corporation) ;
  • Chang, Soon-Woong (Department of Environmental Engineering, Gyonggi University) ;
  • An, Sang-Woo (Environment Research Department, Korea Institute of Construction Technology) ;
  • Yonn, Young-Han (Environment Research Department, Korea Institute of Construction Technology) ;
  • Zoh, Kyung-Duk (Institute of Health and Environment, and School of Public Health, Seoul National University)
  • 발행 : 2006.09.30

초록

[ $TiO_2/UV$ ] system에서 azo dye 중 반응성 염료의 광촉매 산화분해에 대한 연구를 수행하였다. 광촉매 산화공정은 다양한 인자에 의해 영향을 받으며 이런 인자들의 산화반응에서 효과 및 특성을 파악하고 예측식 모형을 추정하기란 매우 힘든 작업이다. 따라서 본 연구는 실험계획법 중 박스-벤켄법(Box-Behnken method)을 이용하여 2인자 3수준의 실험디자인으로 최적의 산화조건을 찾기 위한 실험을 수행한 결과는 다음과 같다. 본 실험에서 색도 제거율($Y_1$)의 반응모형에 가장 크게 영향을 끼치는 항은 주 효과(선형효과)와 교차항으로 나타났고 그 중 $x_2$(dye concentration)가 가장 민감하게 반응모형에 영향을 받는 것으로 확인되었다. $COD_{Cr}(Y_2)$의 반응모형의 경우 $Y_1$의 모형과 마찬가지로 주 효과(선형효과) 및 교차항이 모델의 생성에 가장 중요한 모수로 작용하였지만 $Y_1$와 달리 $x_1(TiO_2)$$x_2$(dye concentration) 모두 반응 모형에서 민감하게 서로 상호작용하며 영향을 주었다. 최적의 산화조건을 찾기 위해 정준분석 중 능선분석을 수행한 결과 $Y_1:(X_1,\;X_2)$=(1.11 g/L, 51.2 mg/L), $Y_2:(X_1,\;X_2)$=(1.42 g/L, 72.83 mg/L)의 결과를 얻을 수 있었고 모형의 검증결과 매우 높은 신뢰성을 보였다.

The aim of our research was to apply experimental design methodology in the optimization of photocatalytic degradation of azo dye(Reactive orange 16). The reactions were mathematically described as a function of parameters amount of $TiO_2(x_1)$, and dye concentration($x_2$) being modeled by the use of the Box-Behnken method. The results show that the responses of color removal(%)($Y_1$) in photocatalysis of dyes were significantly affected by the synergistic effect of linear term of $TiO_2(x_1)$ and dye concentration($x_2$). Significant factors and synergistic effects for the $COD_{Cr}$, removal(%)($Y_2$) were the linear term of $TiO_2(x_1)$ and dye concentration($x_2$). However, the quadratic term of $TiO_2(x_1^2)$ and dye concentration($x_2^2$) had an antagonistic effect on $Y_1$ and $Y_2$ responses. Canonical analysis indicates that the stationary point was a saddle point for $Y_1$ and $Y_2$, respectively. The estimated ridge of maximum responses and optimal conditions for $Y_1:(X_1,\;X_2)$=(1.11 g/L, 51.2 mg/L) and $Y_2:(X_1,\;X_2)$=(1.42 g/L, 72.83 mg/L) using canonical analysis was 93% and 73%, respectively.

키워드

참고문헌

  1. 조일형, 박재홍, 김영규, 이홍근, '반응표면분석법을 이용한 염색폐수의 광촉매 산화 처리조건의 최적화,' 물환경학회지, 19(3), 257-270(2003)
  2. Li, X. Z., Zhang, M., 'Decolorization and Biodegradability of dyeing wastewater treated by a $TiO_2$-sensitized photo-oxidation process', Water. Sci. Technol., 34(9), 49-55(1996)
  3. Florence, B. M., Edith, P. C., Andre, M. B., Esther, O., 'Photocatalytic degradation of 2,4-dihydroxybenzoic acid in water: effiency optimization and mechanistic vestigations,' Journal of Photochemistry and Photobiology A; Chemistry, 108, 65-71(1997) https://doi.org/10.1016/S1010-6030(96)04501-7
  4. Balanosky, E., Lopez, A., Kiwi, J., 'Degradtion of naphthalene-l,5-disulphonate in a flow reater, Modelling via reduced dimensionless centered variables,' Journal of Photochemistry and Photobiology A; Chemistry, 119, 151-164(1998) https://doi.org/10.1016/S1010-6030(98)00399-2
  5. Morawski, A. W., Grzechulska, J., Kalucki, K., 'A New Method for Preparation of Photossium-Pillared Layered Titanate Applied in photocatalysis,' J. Phys. Chem. Soids., 57(6), 1011-1077(1996) https://doi.org/10.1016/0022-3697(95)00389-4
  6. Kincl, M., Turk, S., Vrecer, F., 'Application of experimental design methodology in development and optimization of drug release method,' International journal of pharmaceutics, 34(3), 233 -233(2005)
  7. 곽재섭, '평면연삭에서 가공특성 평가 및 반응표면모델개발,' 대한기계학회논문집, 29(4), 614-623(2005)
  8. Box, G., Hunter, W. G,. 'Statistics for Experimenters: An Introduction to Design, Data Analysis, and Model Building,' Wiley(1987)
  9. 성내경, 실험설계와 분석, 자연아케데미(1988)
  10. Lundstedt, T., Seifert, E., Abramo, L., 'Experimental design and optimization,' Chemometrics and Intelligent Laboratory Systems, 42, 2-40(1998)