• 대한환경공학회지
• /
• 제28권9호
• /
• pp.917-925
• /
• 2006

[ $TiO_2/UV$ ] system에서 azo dye 중 반응성 염료의 광촉매 산화분해에 대한 연구를 수행하였다. 광촉매 산화공정은 다양한 인자에 의해 영향을 받으며 이런 인자들의 산화반응에서 효과 및 특성을 파악하고 예측식 모형을 추정하기란 매우 힘든 작업이다. 따라서 본 연구는 실험계획법 중 박스-벤켄법(Box-Behnken method)을 이용하여 2인자 3수준의 실험디자인으로 최적의 산화조건을 찾기 위한 실험을 수행한 결과는 다음과 같다. 본 실험에서 색도 제거율($Y_1$)의 반응모형에 가장 크게 영향을 끼치는 항은 주 효과(선형효과)와 교차항으로 나타났고 그 중 $x_2$(dye concentration)가 가장 민감하게 반응모형에 영향을 받는 것으로 확인되었다. $COD_{Cr}(Y_2)$의 반응모형의 경우 $Y_1$의 모형과 마찬가지로 주 효과(선형효과) 및 교차항이 모델의 생성에 가장 중요한 모수로 작용하였지만 $Y_1$와 달리 $x_1(TiO_2)$ 및 $x_2$(dye concentration) 모두 반응 모형에서 민감하게 서로 상호작용하며 영향을 주었다. 최적의 산화조건을 찾기 위해 정준분석 중 능선분석을 수행한 결과 $Y_1:(X_1,\;X_2)$=(1.11 g/L, 51.2 mg/L), $Y_2:(X_1,\;X_2)$=(1.42 g/L, 72.83 mg/L)의 결과를 얻을 수 있었고 모형의 검증결과 매우 높은 신뢰성을 보였다.

• Advances in nano research
• /
• 제12권4호
• /
• pp.415-426
• /
• 2022

Nickel substituted cobalt-zinc ferrite nanoparticles with composition Co_0.5Zn_0.5Ni_xFe_2-xO₄ (x = 0.25, 0.5, 0.75, 1.0) were synthesized using a wet chemical method named citrate precursor method. Various characterizations of the prepared nanoferrites were done using X-ray powder diffractometry (XRD), Scanning electron microscopy (SEM), UV visible spectroscopy and Fourier transform spectroscopy technique (FT-IR). XRD confirmed the formation of cubic spinel structure of the samples with single phase having one characteristic peak at (311). The value of optical band gap (E_g) was found to decrease with Ni substitution and have values in the range 2.30eV to 1.69eV. A Fenton-type system was created by photocatalytic activity using source of visible light for removal of methylene blue dye. Observations revealed increase in the degradation of methylene blue dye with increasing nickel content in the samples. The degradation percentage was increased from 77.32% for x = 0.25 to 90.16% for x = 1.0 in one hour under the irradiation of visible light. Also, the degradation process was found to have pseudo first order kinetics model. Hence, it can be observed that synthesized nickel doped cobalt-zinc ferrites have good capability for water purification and its degradation efficiency enhanced with increase in nickel concentration.

• KSBB Journal
• /
• 제22권1호
• /
• pp.48-52
• /
• 2007

본 연구에서는 sonificator를 장착하여 세포막을 파쇄하고 현장에서 형광을 이용하여 조작이 간편하고 단시간에 DNA와 단백질을 동시에 측정할 수 있는 자동화된 형광기를 개발하기 위하여 단백질을 측정하는데 최적의 파쇄조건을 확립하고자 하였다. 용액 중에 녹아 있는 공기 중의 oxygen은 collisional quenching을 일으키는데 sonification이나 가열처리를 시키면 oxygen이 제거되어 quenching 효과가 크게 감소되어 높은 형광값을 나타내었다. 0.7 X 이상의 형광시약 농도에서는 반응시작 후 1분 이내에 측정해야 하며, 0.3 X 이하의 형광시약 농도에서는 반응시작 후 2$\sim$3분 사이에 반응을 시킨 후 측정하는 것이 바람직한 것으로 나타났다. $100{\mu}g/m{\ell}$ 이상의 BSA 농도에서는 형광시약이 포화되었으며, 시료를 sonification시키면 단백질이 변성되어 눈에 보일 정도로 불투명해져서 시료 용액의 불투명도로 인해 형광 값이 감소되는 경향을 나타내었으며, $1{\mu}g/m{\ell}$ 이하의 BSA 시료에서는 sonification을 시키지 않은 시료보다 sonification을 시켰을 때 $0.125{\mu}g/m{\ell}$의 BSA를 훨씬 더 구분이 잘 되어 낮은 단백질 농도에서는 sonification시키는 것이 훨씬 유리한 것으로 나타났다.

• Advances in environmental research
• /
• 제6권2호
• /
• pp.113-125
• /
• 2017

Santa Barbara Amorphous-15(SBA-15) nanoparticles were utilized as the inexpensive and effective adsorbents to remove methylene blue dye from the aqueous solution.SBA-15 was created by Zhao et al method. Infrared spectroscopy, X-ray diffraction and scanning electron microscopy (SEM) were used for the evaluated physical properties of SBA-15. The results of diffraction X-ray indicated that was the crystalline structure for it. Also IR spectroscopy indicated was a silica the whole structure of the groups and SEM image verify the structure of relatively identical particles size of SBA-15. Factors affecting adsorption including the amounts of adsorbent, pH and contact time were investigated by a SBA-15 nanomaterial design. The extent of dye removal enhanced with increasing initial dye concentration and pH from 4 to 10. The higher percentage adsorption were obtained under optimum conditions of variables (sorbent dose of 200 mg/liter, initial MB concentration 10 mg/liter, initial pH of 10 and temperature of $25^{\circ}C$). Maximum adsorption happened after the 2 hour and the kinetic processes of the dyes adsorption were described by applying the pseudo-first-order and the pseudo-second-order and the relatively High correlation with the kinetic Ellovich models. It was found that the pseudo-second-order models kinetic equation described the data of dye adsorption with a good correlation (R2>0.999) which indicated chemisorption mechanism. Freundlich and Langmuir adsorption models were investigated in conditions of variables (adsorbent dose 0.01 gr/liter, MB concentration 10, 20, 30 mg/liter, pH of 4, 7, 10, contact time 90 min and temperature of $27^{\circ}C$). The adsorption data were represented by Langmuir isotherm model. These values are higher than the adsorption capacities of some other adsorbents that have recently been published in the literature.

• Advances in nano research
• /
• 제3권2호
• /
• pp.111-121
• /
• 2015

$CoFe_2O_4$ nanotubes and porous nanorods were prepared via a simple one-pot template-free hydrothermal method and were used as an adsorbent for the removal of dye contaminants from water. The properties of the synthesized nanotubes and porous nanorods were characterized by electron diffraction, transmission electron microscopy and x-ray powder diffraction. The Adsorption characteristics of the $CoFe_2O_4$ were examined using polar red dye and the factors affecting adsorption, such as, initial dye concentration, pH and contact time were evaluated. The overall trend followed an increase of the sorption capacity reaching a maximum of 95% dye removal at low pHs of 2-4. An enhancement in the removal efficiency was also noticed upon increasing the contact time between dye molecules and $CoFe_2O_4$ nanoparticles. The final results indicated that the $CoFe_2O_4$ nanotubes and porous nanorods can be considered as an efficient low cost and recyclable adsorbent for dye removal with efficiency 94% for Cobalt ferrite nanotubes and for Cobalt ferrite porous nanorods equals 95%.

• Carbon letters
• /
• 제15권2호
• /
• pp.105-112
• /
• 2014

Wastewater from textile industries is a major cause of water pollution in most developing countries. In order to address the issues of water pollution and high cost for treatment processes, the use of an inexpensive and environmentally benign adsorbents has been studied. The objective was to find a better alternative to the conventional methods. Lemon grass waste (ash) collected from a lemon grass stream distillation subunit in Bhutan was tested for dye removal from aqueous solutions. The study investigated the removal of methylene blue using the following operational parameters: initial concentration (100-600 mg/L), contact time, adsorbent dose (0.1-0.55 gm/100 mL), and pH (3-10). It was found that the percentage removal of dye increased with a decrease of the initial concentration and increased contact time and dose of adsorbent. The basic pH solution of dye showed better adsorption capacity as compared to the acidic dye solution. Langmuir and Freundlich adsorption isotherms were fitted to the data well. Data fitted better to Lagergren pseudo 2nd order kinetics than a 1st order kinetic model. Surface morphology was also examined via scanning electron microscopy. An elemental analysis was also carried out and the chemical composition and functional groups were analyzed using energy dispersive X-ray spectroscopy and Fourier transform infrared spectroscopy techniques, respectively. The obtained results indicate that lemon grass ash could be employed as a low cost alternative to commercial activated carbon in wastewater treatment for the removal of dyes.

• Bulletin of the Korean Chemical Society
• /
• 제10권4호
• /
• pp.357-359
• /
• 1989

The ion aggregates formed between cationic triphenylmethane dyes and tetraphenylborate(TPB) or tetrakis(4-fluorophenyl) borate (TFB) anions have been investigated spectroscopically. The photometric sensitivities of the dyes are found to be increasing in the order pararosaniline < malachite green < methyl violet 2B < crystal violet < ethyl violet. Cetyltrimethylammonium bromide(CTAB) and Triton X-100(TX-100) destroy the ion aggregates. By comparing the concentration of surfactant beyond which dye-borate mixed solutions behave identically with the dye blank, the order of hydrophobicity appears to be parallel with that of photometric sensitivity.

• Current Photovoltaic Research
• /
• 제4권2호
• /
• pp.42-47
• /
• 2016

Increasing the efficiency of dye-sensitized solar cells (DSSCs) by the fabrication of new photoelectrodes (PEs) is an important challenge. This study examined the photovoltaic parameters of DSSCs composed of a $TiO_2$ PE with $WO_3$ nanoparticles (NPs). A number of PEs with the same thickness but different concentrations of $WO_3$ NPs in the $TiO_2PE$ were prepared. The morphology and structural properties of the prepared PEs were examined by field-emission scanning electron microscopy and X-ray diffraction, respectively. The effects of the $WO_3$ NPs mixing concentration on the efficiency of DSSCs were investigated under simulated solar light irradiation.

• 에너지공학
• /
• 제10권4호
• /
• pp.379-386
• /
• 2001

본 연구는 산업용 고부하 버너연소에서의 NO$_{x}$ 저감에 관한 실험적 연구이다. 본 연구에서는 NO$_{x}$의 정량적 농도 분포 측정을 위하여 레이저 유동 형광법을 사용하였다. XeCL 엑시머 레이저를 사용하여 NO A-X (0, 0) 진동밴드를 226 nm로 여기하였다. 또한 P$_{21}$+Q$_1$(14.5)/R$_{12}$+Q$_2$(20.5)/P$_1$(23.5) 전이를 여기라인으로 하였으며 다른 간섭의 영향을 최소화 하였다. 본 실험에서 이중선회 확산화염에서의 NO 농도 분포를 측정하였으며, 이 스월버너에서의 화염의 후류에 있어서 NO 농도는 1차/2차 공기비가 증가할 때 감소함을 알수 있었다.

• 한국분무공학회지
• /
• 제6권3호
• /
• pp.1-7
• /
• 2001

In this study, quantitative measurement of nitric oxide concentration distributions visualization were investigated in the laminar $CH_4/O_2N_2$ nixed flame by Planar laser-induced fluorescence(PLIF). The NO A-X (0,0) vibrational band around 226nm was excited using a XeCl excimer-pumped dye laser. Selecting an appropriate NO transition minimizes interference from Rayleigh scattering and $O_2$ fluorescence. The measurements were taken in $CH_4/O_2N_2$ premixed flame with equivalence ratios varying from $1.0{\sim}1.6$, and a fixed flow rate of 3slpm. NO was found to produce primarily between an inner premixed and an outer nonpremixed flame front, and total NO concentration is raised when equivalence ratios increase. These results suggest that prompt NO is likely to contribute to MO formation in $CH_4/O_2N_2$ premixed flame. Furthermore, this trend was well matched with previous works.