Transactions of the Korean Society of Automotive Engineers (한국자동차공학회논문집)

The Korean Society of Automotive Engineers (한국자동차공학회)
권호 표지

A Study on the Interaction between Distributed Cracks

분포 크랙들 사이에서의 상호 간섭에 관한 연구

  • Han, Moon-Sik (School of Mechanical and Automotive Engineering, Keimyung University) ;
  • Cho, Ja-Eung (Faculty of Mechanical and Automotive Engineering, Gongju National University)
  • 한문식 (계명대학교 기계 자동차공학부) ;
  • 조재웅 (공주대학교 기계 자동차공학부)
  • Published : 2005.11.01
Download PDF
⟨ Previous Next ⟩

Abstract

For the case that center crack is surrounded by four small cracks which are symmetrically distributed around center crack, the same values of normalized stress intensity factor of center crack according to the position of the tip of small cracks are located on the smooth curve. And the stress intensity factor according to any position of small cracks can be sufficiently obtained from this curve. The plastic zones between distributed cracks are also investigated by changing the positions of nearly small cracks. The occurrence of plastic zone due to the interaction between center crack and small cracks are analyzed by finite element method. The mechanical behavior at the vicinity of crack tips is investigated by plastic areas. The changes of plastic zones according to positions of distributed cracks are drawn schematically. The safety of materials is also analyzed.

Keywords

References

  1. S. H. Song, B. H. Choi and J. S. Bae, 'An Experimental Study on the Fatigue Behavior and Stress Interaction of Arbitrarily Located Defects(1 ),' Journal of Korean Society of Mechanical Engineers, Vol.24, No.5, pp.1288-1296, 2000
  2. H. Kitagawa, 'Passive Analysis of Various Given Cracks and Cracking Processes,' Proc. Int. Conf. Frac. Mech. & Tech., Vol.2, pp.995-1009, 1977
  3. S. H. Song, B. H. Choi and J. S. Bae, 'Crack Propagation Behavior on the Characteristic of the Interaction Between Two Fatigue Cracks,' KSME International Journal, Vol.12, No.2, pp.191-198, 1998
  4. S. H. Song and H. S. Oh, 'Behavior of Initiation and Propagation Cracks around Holes,' Journal of Korea Committee for Ocean Resources and Engineering, Vol.1, No.2, pp.250-258, 1987
  5. W. C. Park, S. C. Huh, J. W. Jung, H. W. Lee and M. H. Boo, 'A Study on Fatigue Crack Behavior of Metal Matrix Composites for Automobile Engine,' Transactions of KSAE, Vol.11, No.5, pp.140-146, 2003
  6. K. D. Park and C. G. Jung, 'The Effect of Compressive Residual Stresses of Two-stage Shot Peening for Fatigue Life of Vehicle Spring Steel,' Transactions of KSAE, Vol.11, No.1, pp.185-192, 2003
  7. M. Isida, 'Methods of Analysis and Solutions of Crack Problems,' Noordhoff, p.56, 1973
  8. M. Isida, 'Effect of Width and Length on Stress Intensity Factors of Internally Cracked Plates under Various Boundary Conditions,' Int. J. of Frac. Mech., Vol.7, pp.301-316, 1971
  9. M. Isida, 'Stress Intensity Factors and Dugdale Tips Plastic Zones for a Finite Plate with an Internal Crack,' Proc., Symp. on Appl. & Ext. of Frac. Mech., lap. Soc. Mech. Engrs., No.710-7, p.119, 1971
  10. 白鳥正樹, 三好俊郞, 松下久雄, 수치파괴역학, 1980
  11. J. U. Cho and M. S. Han, 'A Behavior of Fracture Mechanics on Crack Propagation between Another Materials,' Spring Conference Proceedings, Vol.II, KSAE, pp.887 -892, 2005