Journal of the Korean Society for Precision Engineering (한국정밀공학회지)

Korean Society for Precision Engineering (한국정밀공학회)
권호 표지

Determination of the Orientation of the Scanned Point Data for Direct Rapid Prototyping

직접 쾌속조형을 위한 점 데이터의 조형 자세 결정

  • 변흥석 (국방과학연구소 2 체계개발본부 해양기술부) ;
  • 강의철 (광주과학기술원 기전공학과 대학원) ;
  • 이관행 (광주과학기술원 기전공학과)
  • Published : 2005.10.01
Download PDF
⟨ Previous Next ⟩

Abstract

Keywords

References

  1. Liu, G.H., Wong, Y.S., Zhang, Y.F. and Loh, H.T., 'Error-based segmentation of cloud data for direct rapid prototyping,' Computer Aided Design, Vol.35, pp.633-645, 2002 https://doi.org/10.1016/S0010-4485(02)00087-8
  2. Wu, Y.F, Wong, Y.S., Loh, H.T. and Zhang, Y.F., 'Modelling cloud data using an adaptive slicing approach,' Computer Aided Design, Vol.36, pp. 231-240,2004 https://doi.org/10.1016/S0010-4485(03)00097-6
  3. Hur, J. and Lee, K., 'The Development of a CAD Environment to Determine the Preferred Build-up Direction for Layered Manufacturing,' International Journal of Advanced Manufacturing Technology, Vol. 14, pp. 247-254, 1998 https://doi.org/10.1007/BF01199879
  4. Pham, D.T., Dimov, D.T. and Gault, R.S., 'Part Orientation in Stereolithography,' International Journal of Advanced Manufacturing Technology, Vol.15, pp. 674-682, 1999 https://doi.org/10.1007/s001700050118
  5. Lin, F., Sun, W., Yan, Y., 'Optimization with minimum process error for layered manufacturing fabrication,' Rapid Prototyping Journal, Vol.7, No.2, pp. 73-8,2001 https://doi.org/10.1108/13552540110386691
  6. Masood, S.H., Rattanawong, W. and Iovenitti, P., 'Part Build Orientations Based on Volumetric Error in Fused Deposition Modeling,' International Journal of Advanced Manufacturing Technology, Vol.19, pp. 162-168,2000 https://doi.org/10.1007/s001700050022
  7. Alexander, P., Allen, S. and Dutta, D., 'Part orientation and build cost determination in layered manufacturing,' Computer Aided Design, Vol.30, pp. 343-356, 1998 https://doi.org/10.1016/S0010-4485(97)00083-3
  8. Xu, F., Loh, H.T. and Wong, Y.S., 'Considerations and selection of optimal orientation for different rapid prototyping systems,' Rapid Prototyping Journal, Vol.5, pp. 54-60,1999 https://doi.org/10.1108/13552549910267344
  9. Thrimurthulu, K., Pandey, P.M. and Reddy, N.V., 'Optimum part deposition orientation in fused deposition modeling,' International Journal of Machine Tools & Manufacture, Vol.4, pp. 585-594, 2004 https://doi.org/10.1016/j.ijmachtools.2003.12.004
  10. Byun, H.S. and Lee, K.H., 'Optimal part orientation of rapid prototyping using a genetic algorithm,' Proc. the 34th International Conference on Computers and Industrial Engineering, San Francisco, CA, November 14-16, 2004
  11. Lee, K.H., Woo, H. and Suk, T., 'Point data reduction using 3D grids,' International Journal of Advanced Manufacturing Technology, Vol. 18, pp. 201-210,2001 https://doi.org/10.1007/s001700170075
  12. Reeves, P.E. and Cobb, R.C., 'Surface deviation modeling of LMT processes - A comparative analysis,' Proceedings of the Fifth European Conference on Rapid Prototyping and Manufacturing, University of Nottingham, UK, pp. 59-77,1995
  13. Chen, C.T., 'Extension of the TOPSIS for group decision-making under fuzzy environment,' Fuzzy Sets and Systems, Vol.114, pp. 1-9,2000 https://doi.org/10.1016/S0165-0114(97)00377-1
  14. Mitsuo, Gen and Runwei, cheng, 'Genetic Algorithms and Mechanical Design,' JOHN WILEY & SONS, INC., 1997