회전형 CMP장비의 속도 및 마찰력 분포 해석

Velocity and Friction Force Distribution in Rotary CMP Equipment

  • 발행 : 2003.05.01

초록

As the design rules in semiconductor manufacturing process become more and more stringent, the higher degree of planarization of device surface is required for a following lithography process. Also, it is great challenge for chemical mechanical polishing to achieve global planarization of 12” wafer or beyond. To meet such requirements, it is essential to understand the CMP equipment and process itself. In this paper, authors suggest the velocity distribution on the wafer, direction of friction force and the uniformity of velocity distribution of conventional rotary CMP equipment in an analytical method for an intuitive understanding of variation of kinematic variables. To this end, a novel dimensionless variable defined as “kinematic number” is derived. Also, it is shown that the kinematic number could consistently express the velocity distribution and other kinematic characteristics of rotary CMP equipment.

키워드

참고문헌

  1. Preston, F. W., 'The Theory and Design of Plate Glass Polishing Machines,' J. of Soc. of Glass Technology, Vol. 11, No. 44, pp. 227-228, 1927
  2. Hocheng, H.;Tsai, H. Y.;Tsai, M. S. Effects of Kinematic Variables on Nonuniformity in Chemical Mechanical Planarization J. of Machine Tools & Manufacture https://doi.org/10.1016/S0890-6955(00)00013-4
  3. Lin, C. F.;Tseng, W. T.;Feng, M. S. Process Optimization and Integration for Silicon Oxide Intermetal Dielectric Planarized by Chemical Mechanical Polish J. of Electrochem. Soc. https://doi.org/10.1149/1.1391877
  4. Hansen, D. A. and Moloney, G., 'The Effect of Carrier Oscillation on Within Wafer Non-Uniformity of CMP Removal Rate,' 6th CMP-MIC, p. 331, 2001
  5. Stachowiak G.W., Batchelor A.W., Engineering Tribology, Tribology sereis24, Elsevier , NY, p. 219, 1993
  6. Kim, H. J., Kwon, D. H., Jeong, H. D., 'Tribological Aspects in Chemical Mechanical Polishing,' 7th CMP-MIC, pp. 201-208, 2002
  7. Modak, A., Monteith, P. and Parekh, N., 'Components of Within-Wafer Non-Uniformity in a Dielectric CMP Process,' 2nd CMP-MIC, pp. 169-172, 1997
  8. Pangrle, S. K., Salugsugan, I., Dangca, A., et. al. 'Polishing Performance of The Rodel EX2000 Pad,' 1st CMP-MIC, pp. 47-54, 1996