References
- Noyan, I. C. and Cohen, J. B., 1987, Residual Stresses, Springer-Verlag, New York
- Karlsson, L., Hultman, L. and Sundgren, J.-E., 2000, 'Influence of Residual Stresses on the Mechanical Properties of TiCxN1-x (x=O, 0.15, 0.45) Thin Films Deposited by Arc Evaporation,' Thin Solid Films, Vol. 371, pp. 167-177 https://doi.org/10.1016/S0040-6090(00)00996-2
- Uhlmann, E. and Klein, K., 2000, 'Stress Design in Hard Coatings,' Surface and Coatings Technology, Vol. 131, pp. 448-451 https://doi.org/10.1016/S0257-8972(00)00837-9
- Fang, W. and Lo, C.- Y., 2000, 'On the Thermal Expansion Coefficients of Thin Films,' Sensors and Actuators, Vol. 84, pp. 310-314 https://doi.org/10.1016/S0924-4247(00)00311-3
- Ruud, C. O., DiMascio, P. S. and Yavelak, J. J., 1985, 'Comparison of Three Residual-stress Measurement Methods on a Mild Steel,' Experimental Mechanics, Vol. 25, pp. 338-343 https://doi.org/10.1007/BF02321331
- Joo, J. W. and Park, C. K., 1998, 'Determination of Non-uniform Residual Stress by the Hole Drilling Method,' Trans KSME A, Vol. 22, pp. 268-277
- Perry, A. J., Sue, J. A. and Martin, P. J., 1996, 'Practical Measurement of the Residual Stress in Coatings,' Surface and Coatings Technology, Vol. 81, pp. 17-28 https://doi.org/10.1016/0257-8972(95)02531-6
- Lee, O. S. and Read, D. T., 1995, 'Micro-strain Distribution around a Crack Tip by Electron Meam Moire Method,' KSME International Journal, Vol. 9, pp. 298-311 https://doi.org/10.1007/BF02953628
- Bergman, L. and Nernanich, R. J., 1995, 'Raman and Photoluminescence Analysis of Stress State and Impurity Distribution in Diamond Thin Films,' J. Appl. Phys., Vol. 78, pp. 6709-6719 https://doi.org/10.1063/1.360495
- Doerner, M. F. and Nix, W. D., 1986, 'A Method for Interpreting the Data from Depth-sensing Indentation Instruments,' J. Mater. Res., Vol. 1, pp. 601-609 https://doi.org/10.1557/JMR.1986.0601
- Pharr, G. M. and Oliver, W. C.. 1992, 'Measurement of Thin Film Mechanical Properties Using Nanoindentation,' MRS bulletin, July, pp. 28-33
- Sines, G. and Carlson, R., 1952, 'Hardness Measurements for Determination of Residual Stresses,' ASTM Bulletin, February, pp. 35-37
- Underwood, J. H., 1973, 'Residual-stress Measurement Using Surface Displacements around an Indentation,' Experimental Mechanics, Vol. 13, pp. 373-380 https://doi.org/10.1007/BF02324039
- LaFontaine, W. R., Paszkiet, C. A., Korhonen, M. A. and Li, Che-Yu, 1991, 'Residual Stress Measurements of Thin Aluminum Metallizations by Continuous Indentation and X-ray Stress Measurement Techniques,' J. Mater. Res., Vol. 6, pp. 2084-2090 https://doi.org/10.1557/JMR.1991.2084
- Tsui, T. Y., Oliver, W. C. and Pharr, G. M., 1996, 'Influences of Stress on the Measurement of Mechanical Properties Using Nanoindentation: Part Ⅰ. Experimental Studies in an Aluminum Alloy,' J. Mater. Res., Vol. 11, pp. 752-759 https://doi.org/10.1557/JMR.1996.0091
- Bolshakov, A., Oliver, W. C. and Pharr, G. M., 1996, 'Influences of Stress on the Measurement of Mechanical Properties Using Nanoindentation: PartⅡ. Finite Element Simulations,' J. Mater. Res., Vol. 11, pp. 760-768 https://doi.org/10.1557/JMR.1996.0092
- Suresh, S. and Giannakopoulos, A. E., 1998, 'A New Method for Estimating Residual Stresses by Instrumented Sharp Indentation,' Acta Mater., Vol. 46, pp. 5755-5767 https://doi.org/10.1016/S1359-6454(98)00226-2
- Tsui, T. Y. and Pharr, G. M., 1999, 'Substrate Effects on Nanoindentation Mechanical Property Measurement of Soft Films on Hard Substrates,' J. Mater. Res., Vol. 14, pp. 292-301 https://doi.org/10.1557/JMR.1999.0042
- Thomsen, N. B., Fischer-Cripps, A. C. and Swain, M. Y, 1998, 'Crack Formation Mechanisms during Micro and Macro Indentation of Diamond-like Carbon Coatings on Elastic-plastic Substrates,' Thin Solid Films, Vol. 332, pp. 180-184 https://doi.org/10.1016/S0040-6090(98)01101-8