참고문헌
- Chadwick, A.L., 1996, 'Surface Finishing of Stereo lithography Models Used as Patterns for Rapid Tooling Techniques,' BEng Dissertation. Department of Manufacturing Engineering, University of Nottingham
- Paul F. Jacobs, 1992, 'Rapid Prototyping & Manufacturing,' Society of Manufacturing Engineers, pp.32-52
- Philip E. Reeves and Richard C. Coob, 1997, 'Reducing the Surface Deviation of Stereolithography Using In-Process Techniques,' Rapid Prototyping Journal, Vol. 3, No. 1, pp. 20-31 https://doi.org/10.1108/13552549710169255
- Hagihara, S. Furukawa, N. Kiyohiro, and H. Makino, 2000, 'Laser Lithography for Making Jewelry -A Concept of Diagonal Irradiation-,' Proceedings of The 8th International Conference on Rapid Prototyping, Tokyo, Japan, 12-13
- Lee, K. H. and Choi, K, 2000, 'Generating Optimal Slice Data for Layered Manufacturing,' International Journal of Advanced Manufacturing Technology, Vol. 16, No.4, pp 277-284 https://doi.org/10.1007/s001700050157
- Pham, D. T., Dimov, S. S. and Gault, R. S., 1999, 'Part Orientation in Stereolirhography,' International Journal of Advanced Manufacturing Technology, Vol. 15, No.9, pp. 674-682 https://doi.org/10.1007/s001700050118
- Cheng, W, Fuh, J. Y. H., Nee, A. Y. C., Wong, Y. S., Loh, H. T. and Miyazawa, T., 1995, 'Multi-Objective Optimization of Part Building Orientation in Stereolithography,' Rapid Prototyping Journal, Vol. 1, No.4, pp. 12-23 https://doi.org/10.1108/13552549510104429
- Lan, P., Chou, S., Chen, L. and Gemmill, D., 1997, 'Determination of Fabrication Orientations for Rapid Prototyping with Stereolithography Apparatus,' Computer-Aided Desing, Vol. 29, No.1, pp. 53-62 https://doi.org/10.1016/S0010-4485(96)00049-8
- Jur, J. H. and Lee, K. W, 1996, ' Determination of Optimal Build-up Direction for Stereolithographic Rapid Prototyping,' Journal of the Korean Society of Precision Engineering, Vol. 13, No.4, pp. 163-173
- Masood, S. H. and Rattanawong, W, 2002, 'A Generic Part Orientation System Based on Volumetric Error in Rapid Prototyping,' International Journal of Advanced Manufacturing Technology, Vol. 19, No.3, pp. 209-216 https://doi.org/10.1007/s001700200015
- Sung-Min Hur, Do-Keun Oh, Kyung-Hyun Choi and Seok-Hee Lee, 2000, 'Optimization of Build Parameters in SLS Process,' Transactions of the KSME, A, Vol. 24, No.3, pp. 769-776
- Cobb, R.C, Spencer, J.D. and Dickens, P.M., 1993, 'Better surface finishing techniques for the RPT is a must,' Proceedings of the 2nd Scandinavian Rapid Prototyping Conference, Danish Technological Institute, Aarhus, Denmark 4-6
- Dae-Keon Ahn, Ho-Chan Kim and Seok-Hee Lee, 2001, 'A Study on Reducing the Surface Roughness of Stereolithography Parts Using Paraffin Coating and Grinding Postprocess,' Proceedings of Korean Society of Precision Engineering, Spring, pp. 45-48