• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.04b
• /
• pp.481-484
• /
• 1995

3차원 CDA 시스템의 보급 및 설계단게에 적용이 확대 되어 가면서 CAD 시스템에 의한 3차원 입체모형제작 기술에 많은 관심이 주목되고있다. 특히 최근에는 광조형 장치가 상품개발사이클의 단축화와 Concurrent Engineering 실현의 중요한 도구로써 자리매김을 하고있으므로 본 논문에서는 광조형장치의 구성 및 조형 사례에 대하여 기술하고자 한다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.04a
• /
• pp.847-851
• /
• 1997

In the stereolithography process, the accuracy of cured shape depends on laser power, scanning speed, scanning pattern, resin characteristics etc. When three-dimensional objects are built, higher laser power gives higher building efficiency. Normally we could control scanning speed and scanning pattern, which affect curing thickness and generate volume of curl in & after building. Oligomer, Monomer and Initiator are major components. Kinds and of them decide characteristic of resin. In this paper, we deak with major facts and their characteristics for precision shape building.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.5
• /
• pp.15-21
• /
• 1997

In the stereolithography process, the accuracy of cured shape depends on laser power, scanning speed, scanning pattern, resin characteristics etc. When three-dimensional objects are built, higher laser power gives higher building efficiency. Normally we could control scanning speed and scanning pattern, which affect curing thickness and generate volume of curl in & after building. Olgomer, Monomer and Initiator are major components. Kinds and volume of them decide characteristic of resin. In this paper, we deal with major facts and their characteristics for precision shape building.

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.8
• /
• pp.7-13
• /
• 2009

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1992.10a
• /
• pp.106-110
• /
• 1992

컴퓨터에 의한 입체 형상 이용 기술의 발달로 3차원 CAD 데이타 형상의 제품을 2차원 형상의 층으로 연속적으로 적층 하는 입체인쇄(Stereolithography)기술개발이 활발하게 이뤄지고 있어 부품설계와 생산에 혁신을 예고하고 있으며, 이 같은 입체 인쇄 기술 중에서 특히, 특정 주파수의 빛에 의하여 경화되는 광 경화성수지(Photopolymer)에 레이저(Laser)를 주사하면 표면의 미소경화부만 경화되는 성질을 이용하여 소재를 경화시키는 광 조형법리 각광을 받고 있다. 본 논문에서는 광조형법에 의한 모델성형시 레이저빔의 조사에 의하여 야기되는 광경화성 수지의 상변화에 의한 성형물의 수축 및 뒤틀림에 대한 연구를 수행하였다

• Proceedings of the KIEE Conference
• /
• 1995.07b
• /
• pp.889-891
• /
• 1995

3차원 CAD System의 보급이 확대되고, 또한 설계단계에 3D CAD의 적용이 진행되어 가면서 CAD System에 의한 3차원 입체모형 제작기술에 많은 관심이 주목되고 있다. 특히 최근에는 상품개발 Cycle의 단축화와 Concurrent Engineering 실현의 중요한 도구로써 다양한 기능을 제공하고 있다. 그 방법중의 하나가 특정한 파장에서 반응하는 광경화성 수지에 자외선의 Laser 광을 조사하여 원하는 입체형상을 제작하는 기술이다. 본 논문에서는 광조형물의 제작원리와 시스템 개발에 대하여 논하고자 한다.

• The Optical Journal
• /
• s.130
• /
• pp.16-16
• /
• 2010

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.11
• /
• pp.2409-2414
• /
• 2002

The surfaces of prototypes become rough due to the stair-stepping which is the inevitable phenomenon in the Rapid Prototypes are not used only for the verification of feature. The grinding, coating, or the composition of them is a main operation in post-processing in which lots of costs and long build time are needed. The solution is proposed to increase the efficiency of rapid prototyping by minimizing or removing the composition of them is a main operation in post-processing in which lots of costs and long build time are needed. the solution is proposed to increase the efficiency of rapid prototyping by minimizing or removing the regions for post-processing. the factors to cause the surface roughness and their effects are analyzed through the experiments. Software modules are developed to predict the surface roughness of each face in the prototyping with the result. An experimental compensation method is developed to apply the modules to various RP equipments, materials and build styles. The build direction is searched with use of genetic algorithm to maximize the total areas of the surface of which roughness is better than the user-defined value.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.4
• /
• pp.102-108
• /
• 2010

Projection microstereolithography is a process of fabricating a micro-structure by using dynamic mask such as digital micromirror device(DMD). DMD shapes the beam into cross-sectional image of structure. Photocurable resin is cured by the beam and stacked layer on top of layer. It is difficult to deliver the beam from the DMD to the photocurable resin without any distortions. We assume that the beam exposed to the resin by 1 pixel of DMD has Gaussian distribution, so the shaped beam reflected by the DMD affects its neighboring area. Curing pattern corresponding to a cross-sectional images is predicted by superposition of pixels of Gaussian distribution and it is similar to cured shape.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.1
• /
• pp.46-50
• /
• 2004

The curing characteristics of a liquid photopolymer during microstereolithography and the shape accuracy of thereby fabricated microstructures were investigated experimentally. A He-Cd laser with a wavelength of 442nm and a photopolymer consisted of a commercial resin from SK chemical and a photoinitiat or were used for the experiment. By varying the laser beam power and scanning speed of the focused laser beam, minimum curing thickness of 50 ${\mu}ㅡ$ was obtained. The distortion of solidified structure due to adhesion force was measured and the optimum fabrication conditions were determined. Also, the feasibility of direct fabrication of three-dimensional microstructures by Super IH process was examined.