Structure Development and Dynamic Properties in High-speed Spinning of High Molecular Weight PEN/PET Copolyester Fibers

  • Im, Seung-Soon (Department of Polymer and Fiber Engineering, College of Engineering, Hanyang University) ;
  • Kim, Sung-Joong (Kolon Industrial Materials Technology Team, Kumi Plant, Kolon Industrial Inc)
  • Published : 2002.03.01

Abstract

The structure development and dynamic properties of fibers produced by high-speed spinning of P(EN-ET) random copolymers were investigated. The as-spun fibers were found to remain amorphous up to the spinning speed of 1500 m/min, and subsequent increases in speed resulted in the crystalline domains containing primarily $\alpha$ crystalline modification of PEN. The f modification was not found up to spinning speeds of 4500 m/min. On the other hand, annealing of constrained fibers spun at the 2100 m/min at 180,200, and 240^{\circ}C$ exhibited $\beta$-form crystalline structure, while the annealed fibers spun in 600-1500 m/min range exhibited dominantly $\alpha$-form. However $\beta$-form crystals disappeared above the spinning speed of 3000 m/min. With increasing spinning speeds from 600 to 4500 m/min, the storage modulus of as-spun fibers increased continuously and reached a value of about 10.4 spa at room temperature. The tan $\delta$curves showed the $\alpha$-relaxation peak at about 155-165^{\circ}C$, which is considered to correspond to the glass transition. The $\alpha$-relaxation peaks became smaller and broader, and shift to higher temperatures as the spinning speed increases, meaning that molecular mobility in the amorphous region is restricted by increased crystalline domain.

Keywords

References

  1. Z. Mencik, Chem. Prum., 17, 78 (1967)
  2. H. G. Zachmann, D. Wiswe, R. Gehrke, and C. Riekel, Makromol. Chem. Suppl., 12, 175 (1985) https://doi.org/10.1002/macp.1985.020121985116
  3. S. J. Kim, J. Y. Nam, Y. M. Lee, and S. S. Im, Polymer, 40, 5623 (1999) https://doi.org/10.1016/S0032-3861(98)00783-6
  4. S. Z. D. Cheng and B. Wunderlich, Macromolecules, 21, 789 (1988) https://doi.org/10.1021/ma00181a040
  5. H. Zhang, A. Rankin, and I. M. Ward, Polymer, 37, 1079 (1996) https://doi.org/10.1016/0032-3861(96)80832-9
  6. R. Jakeways, J. L. Klein, and I. M. Ward, Polymer, 37, 3761 (1996) https://doi.org/10.1016/0032-3861(96)00113-9
  7. S. Buchnner, D. Wiswe, and H. G. Zachmann, Polymer, 30, 480 (1989) https://doi.org/10.1016/0032-3861(89)90018-9
  8. Y. $\ddot{U}lcer$and M. Cakmak, Polymer, 35, 5651 (1994) https://doi.org/10.1016/S0032-3861(05)80039-4
  9. C. S. Cruz, F. J. B. Calleja, H. G. Zachmann, and D. Chen, J. Mater. Sci., 27, 2161 (1992) https://doi.org/10.1007/BF01117931
  10. X. Lu and A. H. Windle, Polymer, 36, 451 (1995) https://doi.org/10.1016/0032-3861(95)91553-J
  11. D. Chen and H. G. Zachmann, Polymer, 32, 1612 (1991) https://doi.org/10.1016/0032-3861(91)90396-Z
  12. H. W. Jun, S. H. Chae, S. S. Park, H. S. Myung, and S. S. Im, Polymer, 40, 1473 (1999) https://doi.org/10.1016/S0032-3861(98)00374-7
  13. M. E. Stewart, A. J. Cox, and D. M. Taylor, Polymer, 34, 4060 (1993) https://doi.org/10.1016/0032-3861(93)90667-Y
  14. J. C. Kim, M. Cakmak, and X. Zhou, Polymer, 39, 4225 (1998) https://doi.org/10.1016/S0032-3861(98)00004-4
  15. J. Jager, J. A. Juijn, C. J. M. Van Den Heuvel, and R. A. Huijts, J. Appl. Polym. Sci., 57, 1429 (1995) https://doi.org/10.1002/app.1995.070571202
  16. K. Miyata, T. Kikutani, and N. Okui, J. Appl. Polym. Sci., 65, 1415 (1997) https://doi.org/10.1002/(SICI)1097-4628(19970815)65:7<1415::AID-APP20>3.0.CO;2-S
  17. A. Nagai, Y. Murase, T. Kuroda, M. Matsui, Y. Mitsuishi, and T. Miyamoto, Sen-i Gakkaishi, 51, 478 (1995)
  18. G. Wu, Q. Li, and J. A. Cuculo, Polymer, 41, 8139 (2000) https://doi.org/10.1016/S0032-3861(00)00122-1
  19. I. Ouchi, H. Aoki, S. Shimotsuma, T. Asai, and M. Hosoi, Proc. 17th Cong. Mater. Res., Japan, 217 (1974)
  20. M. Cakmak and J. C. Kim, J. Appl. Polym. Sci., 64, 729 (1997) https://doi.org/10.1002/(SICI)1097-4628(19970425)64:4<729::AID-APP13>3.0.CO;2-P
  21. A. K. Taraiya, A. P. Unwin, and I. M. Ward, J. Polym. Sci., Part B, Polym. Phys., 26, 817 (1988) https://doi.org/10.1002/polb.1988.090260408