In order to manufacture high-quality free-form concrete panel (FCP), it is necessary to analyze the limitations of free-form silicone mold (FSM) and conduct technology development research. Currently, the FSM used in FCP manufacture is classified into a side silicon mold(SSM) and a lower silicon mold(LSM). In this study, the limitations of each silicon mold were analyzed and solutions were proposed. In the case of side silicon mold, there is a limit to cannot supporting the side pressure of concrete. Therefore, a mold stacking method was proposed, and at the same time, a process of correcting the movement value of the rod was proposed. In the case of the lower silicon mold, there is a limit to completely implementing the design shape. Therefore, a real-time scanning method and a process of displaying FCP shape coordinates were proposed. The results of this study are expected to be used as basic data for manufacturing high-quality FCP.
본 논문은 정부(과학기술정보통신부)의 재원으로 한국연구재단의 지원을 받아 수행된 연구임(No. 2020R1C1C1012600).
References
Lee D. A Study of Construction and Management Technology of Free-form Buildings [Ph.D. Thesis]: Kyung Hee University. 2015. 186 p.
Yun J. Development of Connection Technology and Operational Technology for the Lower Mold of Free-form Concrete Panels [master's Thesis]. Hanbat National University. 2022. 74 p.
Jeong K. Development of Two-Sided CNC and Side Mould Control Equipment for Automatic Manufacturing of Free-form Concrete Panel [master's Thesis] Hanbat National University. 2021. 63 p.
Jeong K. Development of Side Silicone Mold for Reducing Shape Error of Free-form Concrete Panel. buildings. 2023. Vol.13, No.2. p. 1-11.https://doi.org/10.3390/buildings13020480