• Title/Summary/Keyword: 측면 실리콘 거푸집

Search Result 2, Processing Time 0.019 seconds

A Basic Study on the Development of Side Silicone Mold Support Device for Improving the Quality of FCP (FCP(Free-Form Concrete Panel) 품질 향상을 위한 측면 실리콘 거푸집 지지장치 개발 기초연구)

  • Jeong, Kyeongtae;Kim, Jihye;Lee, Donghoon
    • Proceedings of the Korean Institute of Building Construction Conference
    • /
    • 2023.05a
    • /
    • pp.165-166
    • /
    • 2023
  • Free-form Concrete Panel(FCP) is each panel that composes the concrete exterior skin of Free-form building. FCPs contain curved surfaces, and FCPs have different curvature, size, and angles. In order to manufacture FCP, high technology is required, and it is currently difficult to manufacture it according to the design shape. In particular, many errors occur in the side shape of FCP. This is because when the side silicone mold is applied, it is installed without a coupling method between molds and support device. In this study, basic research was conducted to develop a side silicone mold support device to solve the above problems. We classified the required performance and derived the detailed requirements. Also, Based on this, we drew the basic design of the support device. We plans to conduct design improvement, mock-up making, and FCP manufacturing experiments through future research.

  • PDF

Limitation and Solution of Free-form Silicone Mold (FSM) used in Free-form Concrete Panel (FCP) Manufacture (FCP(Free-form Concrete Panel) 제작에 사용되는 FSM(Free-form Silicone Mold)의 한계와 해결방안)

  • Jeong, Kyeong-Tae;Youn, Jong-Young;Yu, Chae-Yeon;Lee, Dong-Hoon3
    • Proceedings of the Korean Institute of Building Construction Conference
    • /
    • 2023.11a
    • /
    • pp.21-22
    • /
    • 2023
  • In order to manufacture high-quality free-form concrete panel (FCP), it is necessary to analyze the limitations of free-form silicone mold (FSM) and conduct technology development research. Currently, the FSM used in FCP manufacture is classified into a side silicon mold(SSM) and a lower silicon mold(LSM). In this study, the limitations of each silicon mold were analyzed and solutions were proposed. In the case of side silicon mold, there is a limit to cannot supporting the side pressure of concrete. Therefore, a mold stacking method was proposed, and at the same time, a process of correcting the movement value of the rod was proposed. In the case of the lower silicon mold, there is a limit to completely implementing the design shape. Therefore, a real-time scanning method and a process of displaying FCP shape coordinates were proposed. The results of this study are expected to be used as basic data for manufacturing high-quality FCP.

  • PDF