• 한국수산과학회지
• /
• 제33권5호
• /
• pp.448-454
• /
• 2000

IOSP를 이용하여 적조생물입자에 대한 응집실험을 한 결과는 다음과 같다. 본 실험에 사용한 IOSP의 평균 지름은 $11.6{\mu}m$이고, 약$ 77{\%}$의 입자가 $5.0{\~}20.0{\mu}$의 범위에 속하며 변동계수는 $60.1{\%}$이었다. IOSP의 금속성분을 분석한 결과는 $98{\%}$가 칼슘으로서 생석회(CaO)와 같은 성분이었다. IOSP의 전자현미경 사진을 분석한 결과 표면이 매끈한 부정형의 입자로 되어 있었다. IOSP에 해수를 첨가하면 해수중의 $Mg^(+2)$ 이온과 급속하게 반응하여 입자의 표면 주위에 점질성의 $Mg(OH)_2$ 흡수층 (absorption layer)을 형성하여 응집 침전하고 해수의 pH를 10.0 정도까지 상승시켰다. IOSP는 $pH=6.2{\~}12.7$에서 $11.1{\~}50.1 mV$로서 IOSP의 입자가 완전히 용해될 때까지 positive zeta potential을 나타낸 반면 OSP는 pH=9.2, 11.9에서 각각 -42.5, -56.9mV로서 negative zeta potential을 나타내었다. $pNa=2.0{\~}4.0 (10^(-4){\~}10^(-2)M Na^+)$에서 IOSP, OSP의 zeta potential은 거의 일정한 값을 나타내었으나 $pNa=0.0 (1 M Na^+)$에서는 IOSP의 EDL이 매우 크게 압축되어 zeta potential은 거의 0.0mV를 나타내었고 OSP는 -25.4mV의 여전히 높은 negative zeta potential을 나타내었다. IOSP는 $Mg^(+2)$ 이온의 농도가 증가함에 따라 positive zeta potential이 증가하다가 $pMg=3.0 (10^(-3)M Mg^(+2))$에서 감소하는 결과를 나타내었다. 해수 중에서 IOSP는 4.8mV의 positive zeta potential을 나타내었고, OSP와 RTO는 각각 -30.7mV, -9.2mV의 negative zeta potential을 나타내었다. 해수중에서 IOSP의 $Mg(OH)_2$ 흡수층과 적조생물입자 사이에는 positive-negative EDL 반응이 일어나서 이들 둘 사이에는 항상 전기동력학적 인력이 작용하고, 동시에 $Mg(OH)_2$ 흡수층에 의한 전하중화로 인하여 입자 상호간의 응집반응은 극단적 인력이 작용하는 primary minimum에서 일어나고, DLVO 이론에 따라 응집반응은 비가역적아며 매우 신속하게 일어났다. 적조생물입자의 응집제거 효율은 IOSP의 농도 50mg/l까지 급격한 증가를 보이다가 IOSP의 농도가 계속 증가함에 따라서 점점 완만한 증가를 나타내었다. 즉 IOSP의 농도가 증가함에 따라서 지수함수적으로 증가하였다 ($Y=53.81{\times}X^(0.1); R^2=0.9868$).응집 침전은 IOSP 400mg/l 이상에서 거의 완전히 일어났다. IOSP $100mg/l$을 사용하고 G-value를 $1, 6, 29, 139 sec^(-1)$로 단계적으로 증가시키면서 응집 실험을 한 결과 적조생물입자의 응집제거 효율이 각각 $70.5, 70.5, 81.7, 85.3{\%}$로 증가하였다. 이는 응집 반응에서 입자간 충분한 충돌이 일어날 수 있도록 교반하는 것이 매우 중요함을 나타내 주는 것이다.

• 상하수도학회지
• /
• 제14권4호
• /
• pp.343-349
• /
• 2000

Techniques such as dissolved air flotation and electroflotation, which utilize micro bubbles, are increasingly used for water and wastewater treatment. Most studies have concentrated on particle characteristics. Pretreatments that manipulate particle size and zeta potential were considered important. A recent study, which modeled the collision mechanism between micro bubbles and particles in dissolved air flotation, suggested bubble characteristics should also be important. Hydrogen micro bubbles were generated electrolytically and their zeta potentials measured under various conditions using a novel electrophoresis method. Effects of several parameters were investigated. Bubble zeta potentials were found to be pH dependent, and to have a negative value around neutral pH, becoming zero or positive at lower pH. The pH at zero zeta potential was 5.0 under study conditions. Using artificial solution and tap water, at fixed pH, bubble zeta potentials varied with solution composition. Zeta potentia]s of bubbles were affected by the types of cations and anions in solution but not by the voltage applied. These findings will help improve efficiencies of particle removal processes that utilize micro bubbles. As bubble zeta potential varies with solution composition, it needs to be measured for each composition to understand those effects, which increase removal efficiency.

• Elastomers and Composites
• /
• 제50권4호
• /
• pp.304-313
• /
• 2015

In this study, the anionic emulsified asphalt was prepared by dispersing asphalt particles evenly into water with combination of anionic and nonionic surfactants. Effects of NaOH and $CaCl_2$ on the phase stability of the emulsified asphalt were also investigated through zeta potential value and rheology behavior; the emulsified asphalt added with NaOH and $CaCl_2$ showed higher zeta potential value than that the asphalt with addition of only anionic and nonionic surfactants. In addition, with regard to shear thinning behaviors, it was found that pH of the emulsified anionic asphalt and $Ca^{2+}$, counter ion, affected the phase stability. SBR (styrene-butadiene-rubber) latex, EPD (water dispersed Epoxy), PU (polyurethane) and RI-10S, SBS (styrene-butadiene-styrene)-based property improvement additive, were used and studied to enhance the adhesion properties with the aggregates. RI-10S, however, was found to be only compatible with the anionic emulsified asphalt; the coating rate, adhesion and compression strength were increased with the RI-10S content.

• 한국분말재료학회지
• /
• 제22권6호
• /
• pp.403-407
• /
• 2015

Poly-methylmetacrylate (PMMA) is mainly applied in the plastic manufacturing industry, but PMMA is weak and gradually got discolor. The strength of PMMA can be improved through organic-inorganic hybrid nano composites with inorganic nano particles such as, $SiO_2$ or ZrO. However, inorganic nano particles are mostly agglomerated spontaneously. In this study, the zeta potential is controlled using different types of organic solvent with different concentrations, dispersibillity of $SiO_2$ nano particles on the PMMA particle are analyzed. When 3 M acetic acid is used, absolute value of the zeta potential is higher, $SiO_2$ nano particle is well attached, and dispersed on the PMMA particle surface. Results indicate that the absolute value of the zeta potential affects the stability of $SiO_2$ dispersion.

• 멤브레인
• /
• 제27권5호
• /
• pp.399-405
• /
• 2017

계면동전위라 불리는 제타전위(zeta potential)란 표면 전하적 특성을 정량화 한 값으로 전기동역학적 현상으로 발생하는 전위차를 말한다. 제타전위는 막오염(fouling)과 표면전하 분석을 통한 개질 확인 및 치환기 확인에 대한 연구가 활발히 진행되어 왔다. 그리고 제타전위를 측정하는 방법으로는 전기영동(electrophoresis), 전기삼투(eletrosmosis), 유동전위(streaming potential)를 기초로 개발되었고, 그중에서도 평막은 유동전위 측정이 적합하다고 알려졌다. 따라서, 본 연구에서는 poly(styrene-ethylene-butylene-styrene) 고분자에 암모늄을 도입하여 아민화된 SEBS 평막 형택의 분리막을 제조하고, 계면동전위 측정기를 이용하여 제조된 분리막들의 유동전위를 측정하여 결과를 분석하였다.

• 대한화장품학회지
• /
• 제33권2호
• /
• pp.105-110
• /
• 2007

제타전위를 이용하여 이산화티탄의 분산 안정성을 평가하고 이를 통하여 분산안정도 향상에 응용하고자 하였다. 본 연구에서는 제타전위와 관련된 전기이중층, 전기영동, 등전점 및 전기 침투에 대하여 설명하였으며 측정이론을 기술하였다. H-S equation을 이용하여 수계에 분산된 미립자 이산화티탄의 pH변화에 따른 제타전위 변화를 측정하였으며 제타전위는 pH $3.0{\sim}9.0$에서 음의 값으로 측정되었다. 제타전위 값은 pH값 상승에 따라 절대값이 증가하였으며 분산액의 pH 8.0과 9.0에서는 지속적으로 분산이 유지되었다. 이를 통하여 제타전위가 이산화티탄의 분산에 영향을 미치며 제타전위의 절대값 크기가 수계에서 이산화티탄의 분산안정도에 중요한 역할을 하는 것으로 생각된다.

• 한국세라믹학회지
• /
• 제37권8호
• /
• pp.751-759
• /
• 2000

Effects of the dosage change, from 0 to 2.0 wt% based on cement weight, of naphthalenic (NSF) and polycarboxylic(NT-2) superplasticizers, on the fluidity of cement paste substituted by 10 wt% II-anhydrite and fly ash respectively as well as II-anhydrite and fly ash itself were investigated. Dispersion properties between particles in suspension were investigated by zeta potential test. Initial fluidity and slump loss in the paste system were observed through mini-slump and apparent viscosity changes with elapsed time. Zeta potential on the particle surface was a tendency to increase according to increasing of NSF dosage. Especially, zeta potential of fly ash has the highest value among all particles equivalent to NSF dosage. In the fluidity of cement paste substituted by inorganic particles, the specimen with substitution of 10 wt% II-anhydrite and fly ash for cement was more effective than cement itself to improve initial fluidity and retain stable fluidity of cement paste. In addition, effect of NT-2 and NSF to improve the fluidity of cement paste, addition of 1.0 wt% NT-2 was more effective than 1.5wt% NSF.

• 한국환경과학회지
• /
• 제12권8호
• /
• pp.861-870
• /
• 2003

Using a simple continuous optical technique, coupled with measurements of zeta potential, the effects of polyelectrolyte dosage, kaoline particles and pH on flocculation of humic acid by several cationic polyelectrolytes, have been examined. The charge density of a polyelectolyte is important in determining the optimum dosage and in the removal of humic acid. The optimum dosage is less for the polyelectrolytes of higher charge density and is the same regardless of the presence of kaoline particles of different turbidity. At the dosage, the removal of humic acid is higher for the polyelectrolytes of higher charge density and the zeta potential of humic acid approaches to near zero, With increasing pH of humic acid, the optimum dosage increases and the flocculation index value obtained at the dosage decreases in the following pH 7 ＞ pH 5 ＞ pH 9, regardless of polyelectrolytes.

• 한국환경과학회지
• /
• 제12권5호
• /
• pp.559-564
• /
• 2003

The specific ion effects are observed in the alumina-metal EDTA(Ethylene Diamine Tetraacetic Acid) system. These effects seem to be associated with the fluidity of the metal ion in the complex. A consideration of the order of adsorption of the complexes on alumina indicates that a specific ion effect also affects the stability of the system. It is clear that EDTA and its heavy metal complexes have a significant effect on the dewaterability of alumina. These effects are not well represented by zeta potential measurements, especially for EDTA alone. With the nonspeciating complexes, though, the maximum permeability is predicted by the pH$\_$zpc/ from zeta potential measurements. At other pH value, the refiltration rate is better predicted by the state of coagulation as measured by log W.

• Bulletin of the Korean Chemical Society
• /
• 제30권4호
• /
• pp.821-824
• /
• 2009

In this study, a hydrogenated lecithin-containing nanoemulsion was prepared from hydrogenated lecithin and silicone oil. Tween-60 and liquid paraffin, widely known emulsifiers, were used as standard substances, and high shear was produced by utilizing a high shear homogenizer and microfluidizer. The properties of the nanoemulsion prepared with hydrogenated lecithin were evaluated by measuring interfacial tension, dynamic interfacial tension, droplet size, zeta-potential, friction force, skin surface hygrometery, and dermal safety. The interfacial tension of lecinol S10/silicone oil was lower than that of lecinol S10/liquid paraffin. The nanoemulsion prepared from hydrogenated lecithin shows lower zeta-potential, skin surface hygrometery, and friction force compared with a general emulsion. The silicone nanoemulsion prepared from hydrogenated lecithin showed a zero value in the patch test and thus exhibits high dermal safety.