Browse > Article
http://dx.doi.org/10.7473/EC.2015.50.4.304

Preparation and Characterization of Anionic Emulsified Asphalt with Enhanced Adhesion Properties  

Lee, Eun-Kyoung (Department of Biomedical Science, Cheongju University)
Publication Information
Elastomers and Composites / v.50, no.4, 2015 , pp. 304-313 More about this Journal
Abstract
In this study, the anionic emulsified asphalt was prepared by dispersing asphalt particles evenly into water with combination of anionic and nonionic surfactants. Effects of NaOH and $CaCl_2$ on the phase stability of the emulsified asphalt were also investigated through zeta potential value and rheology behavior; the emulsified asphalt added with NaOH and $CaCl_2$ showed higher zeta potential value than that the asphalt with addition of only anionic and nonionic surfactants. In addition, with regard to shear thinning behaviors, it was found that pH of the emulsified anionic asphalt and $Ca^{2+}$, counter ion, affected the phase stability. SBR (styrene-butadiene-rubber) latex, EPD (water dispersed Epoxy), PU (polyurethane) and RI-10S, SBS (styrene-butadiene-styrene)-based property improvement additive, were used and studied to enhance the adhesion properties with the aggregates. RI-10S, however, was found to be only compatible with the anionic emulsified asphalt; the coating rate, adhesion and compression strength were increased with the RI-10S content.
Keywords
anionic emulsified asphalt; phase stability; zeta potential value; rheology behavior; adhesion properties with the aggregates;
Citations & Related Records
Times Cited By KSCI : 4  (Citation Analysis)
연도 인용수 순위
1 N. M. Wasiuddin, A. Marshall, N. E. Saltibus, A. Saber, and C. Abadie, "Use of sweep test for emulsion and hot asphalt chip seals: laboratory and field evaluation", J. Test. Eval., 41, 61 (2013).
2 N. F. Ghaly, I. M. Ibrahim, and E. M. Noamy, "Tack coats for asphalt paving", Egyptian J. Petroleum, 23, 61 (2014).   DOI
3 J. Peng, D. Deng, Q. Yuan, Z. Liu, and L. Fang, "Study of the rheological behavior of fresh cement emulsified asphalt paste", Construct. Build. Mater., 66, 348 (2014).   DOI
4 S. J. Kim, "Asphalt sealant containing the waste edible oil", Elastomer, 39, 63 (2004).
5 K. S. Kim and Y. K. Hong, "A study on the storage stability of waste vinyl-modified asphalt", Elastomer, 43, 191 (2008).
6 D. Attwood and A. T. Florence, "Surfactant Systems", edited by D. Attwood and A. T. Florence, Chapman and Hall, New York, 1983.
7 K. J. Lissant, "Emulsions and Emulsion Technology", edited by K. J. Lissant, Marcel Dekker, New York, 1984.
8 W. S. Heo, E. K. Lee, and S. Y. Choi, "A study on the stabilization of asphalt emulsion with phase inversion emulsification method", Elast. Compos., 44, 143 (2009).
9 K. Shen, Z. H. Huang, J. Yang, G. Yang, W. Shen, and F. Kang, "The use of asphalt emulsions as a binder for the preparation of polycrystalline graphite", CARBON, 58, 239 (2013).
10 M. C. Park and M. C. Lee, "The effects of polymeric emulsifier on the water-resistance and time-dependency of acrylic emulsion pressure sensitive adhesives", J. Korean Ind. Eng. Chem., 15, 48 (2004).
11 R. A. Mercado, J. L. Salager, V. Sadtler, P. Marchal, and L. Choplin, "Breaking of a cationic amine oil-in-water emulsion by pH increasing: Rheological monitoring to modelize asphalt emulsion rupture", Colloid. Surf. A: Physicochem. Eng. Aspects, 458, 64 (2014).
12 X. Zhou, F. Wang, X. Yuan, M. Kuang, Y. Song, and C. Li, "Usage of slurry oil for the preparation of crumb-rubber-modified asphalt emulsions", Construct. Build. Mater., 76, 279 (2015).   DOI
13 M. Boltryk and D. Malaszkiewicz, "Application of anionic asphalt emulsion as an admixture for concrete", Construct. Build. Mater., 40, 556 (2013).   DOI
14 T. Saito and R. Ruch, "Stabilization of Colloidal Dispersion by Polymer Adsorption", edited by T. Saito and R. Ruch, Marcel Dekker, New York, 1982.
15 D. H. Napper, "Polymeric stabilization of colloidal dispersions", Academic Press, London, 1983.
16 W. Fazhou, L. Yunpeng, and H. Shuguang, "Effect of early cement hydration on the chemical stability of asphalt emulsion", Construct. Build. Mater., 42, 146 (2013).   DOI
17 K. Buszello, S. Harnisch, R. H. Muller, B. W. Muller, "The influence of alkali fatty acids on the properties and the stability of paraenteral O/W emulsions modified with solutol HS 15", Eur. J. Pharm. Biopharm., 49, 146 (2000).
18 J. S. Kim, H. S. Uhm, and H. S. Kim, "Atmospheric-pressure plasma treatment of ethylene-vinyl acetate (EVA) to enhance adhesion energy between EVA and polyurethane", Elastomer, 39, 7 (2004).
19 D. B. Genovese and J. E. Lozano, "The effect of hydrocolloids on the stability and viscosity of cloudy apple juices", Food Hydrocolloids, 13, 1 (2001).
20 E. J. Verwey and J. Overbeek, "Theory of the Stability of Lyotropic Colloids", edited by E. J. Verwey and J. Overbeek, Elsevier, Amsterdam, 1948.
21 H. A. Barnes, "Rheology of emulsions-review", Colloid. Surf. A: Physicochem. Eng. Aspects, 91, 89 (1994).   DOI
22 G. Polacco, S. Filippi, F. Merusi, and G. Stastna, "A review of the fundamentals of polymer-modified asphalts: Asphalt/polymer interactions and principles of compatibility", Adv. Colloid Interf. Sci., 224, 72 (2015).   DOI
23 M. C. Park and M. C. Lee, "The effects of polymeric emulsifier on the water-resistance and time-dependency of acrylic emulsion pressure sensitive adhesives", J. Korean Ind. Eng. Chem., 15, 48 (2004).
24 R. Du and J. Zhao, "Properties of poly (N,N-dimethylaminoethyl methacrylate)/polysulfone positively charged composite nanofiltration membrane", J. Membr. Sci., 239, 183 (2004).   DOI
25 G. D. Airey, "Rheological properties of styrene butadiene styrene polymer modified road bitumens", Fuel, 82, 1709 (2003).   DOI
26 T. S. Park, "Evaluation of the modified and special asphalt mixture", J. Korean Soc. Civil Eng., 24, 901 (2004).
27 V. G. Poulpoulou and H. Taube, "Interactions of hexacyano ions with $[Ruen_3]^{3+}$ and $[Ruen_3]^{2+}$ in solution", Inorg. Chem. Acta, 319, 123 (2001).   DOI