• 한국자기학회지
• /
• 제26권2호
• /
• pp.45-49
• /
• 2016

분광학적 분리인자 $g_{ij}$와 영자기장 갈라지기 상수 값 $B_k^q$ 값을 유효 스핀 하밀토니안에 사용하여, $PbWO_4$ : Gd 단결정 내의 정방정계 대칭성 자리에 위치하고 있는 $Gd^{3+}$ 상자성 불순물 이온(유효전자 스핀 S = 7/2)의 바닥상태에서의 에너지 준위를 계산하였다. 외부 자기장이 영일 경우의 $Gd^{3+}$ 이온의 영자기장 갈라지기 값은 $PbWO_4$ : Gd 단결정의 방향에 관계없이 모두 같았고, 이때 ${\mid{\pm}7/2}$ > ${\leftrightarrow}{\mid{\pm}5/2}$ >, ${\mid{\pm}5/2}$ > ${\leftrightarrow}{\mid{\pm}3/2}$ >, ${\mid{\pm}3/2}$ > ${\leftrightarrow}{\mid{\pm}1/2}$ > 전이 사이에서 계산된 에너지 간격은 각각, 6.9574 GHz, 6.9219 GHz, 15.8704 GHz이다. 결정학적 축에 대하여 외부 자기장을 가하는 방향에 따라서 서로 다른 에너지 준위 값을 나타내었다. 이중 외부자기장이 결정학적 주축 a- 및 c-축에 나란할 경우에 에너지 준위를 계산하여 논의하였다.

• 교육녹색환경연구
• /
• 제18권4호
• /
• pp.58-65
• /
• 2019

교육시설은 '공공기관 에너지이용 합리화 추진에 관한 규정'에 따라 2014년부터 '건축물에너지효율 1등급 이상'의 의무대상건축물로 지정되었으며, 동 규정에서 정의하는 공공기관 건축물에 해당되어, 2008년 9월 신·재생에너지 의무대상 건축물로 포함되었다. 또한 2019년 4월 녹색건축물 조성 지원법이 개정됨에 따라, 2020년부터 ZEB인증의 의무대상 건축물로 확정되었다. 따라서 본 연구에서는 2015년 2월부터 2019년 5월까지 "건축물에너지효율등급" 본인증을 획득한 316개의 교육시설을 대상으로 "건물에너지효율등급" 및 "신·재생에너지시스템"설치 현황을 파악하고, 에너지 소요량 및 신·재생에너지 생산량을 기준으로 에너지자립률을 분석하였다. 316개 본인증 교육시설의 "건축물에너지효율등급"에 따른 ZEB 인증등급을 추정하면 1+++ 등급 12개 시설의 경우 1곳을 제외하고 모두 ZEB 5등급 이상으로 나타났으며, 239개의 1++ 등급 시설에서 11%에 해당하는 28곳이 ZEB 5등급 수준에 도달하였다. 따라서 현 수준에서 일반 교육시설의 ZEB 인증은 무리가 있으며, 건물에너지효율 1+++등급 상향과 신·재생에너지시스템 투자가 선행되어야 할 것으로 판단된다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1066-1071
• /
• 2005

This paper presents the two lossless auxiliary inductors-assisted voltage source type half bridge (single ended push pull: SEPP) series resonant high frequency inverter for induction heated fixing roller in copy and printing machines. The simple high-frequency inverter treated here can completely achieve stable zero current soft switching (ZCS) commutation for wide its output power regulation ranges and load variations under its constant high frequency pulse density modulation (PDM) scheme. Its transient and steady state operating principle is originally described and discussed for a constant high-frequency PDM control strategy under a stable ZCS operation commutation, together with its output effective power regulation characteristics-based on the high frequency PDM strategy. The experimental operating performances of this voltage source SEPP ZCS-PDM series resonant high frequency inverter using IGBTs are illustrated as compared with computer simulation results and experimental ones. Its power losses analysis and actual efficiency are evaluated and discussed on the basis of simulation and experimental results. The feasible effectiveness of this high frequency inverter appliance implemented here is proved from the practical point of view.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2005년도 학술대회 논문집
• /
• pp.415-420
• /
• 2005

This paper presents the two lossless auxiliary inductors-assisted voltage source type half bridge (single ended push pull: SEPP) series resonant high frequency inverter for induction heated king roller in copy and printing machines. The simple high-frequency inverter treated here can completely achieve stable zero current soft switching (ZCS) commutation for wide its output power regulation ranges and load variations under its constant high frequency pulse density modulation (PDM) scheme. Its transient and steady state operating principle is originally described and discussed for a constant high-frequency PDM control strategy under a stable ZCS operation commutation, together with its output effective power regulation characteristics-based on the high frequency PDM strategy. The experimental operating performances of this voltage source SEPP ZCS-PDM series resonant high frequency inverter using IGBTs are illustrated as compared with computer simulation results and experimental ones. Its power losses analysis and actual efficiency are evaluated and discussed on the basis of simulation and experimental results. The feasible effectiveness of this high frequency inverter appliance implemented here is proved from the practical point of view.

• Nuclear Engineering and Technology
• /
• 제13권1호
• /
• pp.1-11
• /
• 1981

가압경수로심의 3차원적 simulation 코드인 KINS를 개발하여 고리1호기 제 1주기에 대한 benchmark 계산을 수행하였다. KINS는 FLARE에서 사용하고 있는 모델을 기초로 하여 가압경수로심 해석에 보다 유용하게 쓸 수 있도록 발전시킨 것이다. 제 1주기초에서는 hot zero power 상태에서의 임계붕소농도, 핵연료집합체별 출력분포, 노심평균축방향 출력분포 등을 계산하여 실측 자료와 비교하였다. 아울러 연소도 1000MWD/MTU 단위로 연소계산을수행하여 여기서 산출된 임계 붕소농도와 핵 연료집합체별 출력 분포를 실측자료와 비교하였다. 계산결과는 실측자료와 매우 훌륭하게 일치하고 있으므로 KINS가 가압경수로의 노심관리에 아주 경제적이며 유효한 도구가 될것임을 보여주는 것이라고 생각된다.

• 한국수소및신에너지학회논문집
• /
• 제33권6호
• /
• pp.660-673
• /
• 2022

In achieving carbon neutrality and the hydrogen economy, the estimation of H₂ cost is critical in terms of CCU technologies. This study analyzes LCOH of hydrogen produced by the carbon utilization unit with methane reforming and CO₂ from thermal power plant. LCOH for H₂ made with CO is estimated in three ways of Joint Cost Allocations with financial performance risk assessment. Regarding cost analysis, the zero value of LCOH is $6,003/ton. We found that the CCU technology has economic feasibility in terms of profitability. The sensitivity analysis result shows that the input ratio is more influential to the LCOH than other variables. Risk analysis presents the baseline price of zero value of LCOH - $8,408/ton, which is higher than the cost analysis - $6,003/ton. Mainly, the price variability of natural gas primarily affects the LCOH. The study has significant value in analyzing the financial performance risks as well as the cost of H₂ produced by a Plasma-based CCU system.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.385-392
• /
• 2001

Time-dependent frequency and energy of free vibration of the Spagetti problem, that is the axially moving continuum with time-varying length, are investigated. Exact expressions for the natural frequency and time-varying vibration energy are derived by dealing with traveling waves. When the string length is increased, the vibration period increases, but the free vibration energy varies as a function of both translating velocity and boundary velocity of the continuum. However, when the string undergoes retraction, the vibration energy increases with time, String tension together with non-zero instantaneous velocity at the moving boundary results in energy variation.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 춘계전력전자학술대회 논문집(2)
• /
• pp.755-760
• /
• 2003

A novel current-fed energy-recovery sustaining driver (CFERSD) for a PDP is proposed in this paper. Its main idea is to recover the energy stored in the PDP or to inject the input source energy to the PDP by using the current source built-up in the energy recovery inductor. This method provides zero-voltage-switching (ZVS) of all main power switches, the reduction of EMI, and more improved operational voltage margins with the aid of the discharge current compensation. In addition, since the current flowing through the energy recovery inductor can compensate the plasma discharge current flowing through the conducting power switches, the current stress through all main power switches can be considerably reduced. Furthermore, it features a low conduction loss and fast transient time. Operations, features and design considerations are presented and verified experimentally on a 1020X106mm sized PDP, 50kHz-switching frequency, and sustaining voltage 140V based prototype.

• 소음진동
• /
• 제9권5호
• /
• pp.906-913
• /
• 1999

Time-dependent period and energy of free vibration of a string, whose length varies with time at a constant rate, are investigated by a traveling wave method. When the string length is increased, the vibration period increase, but the free vibration energy decrease with time. However, when the string undergoes retraction, the vibration energy increases with time. String tension together with non-zero instantaneous velocity at the moving boundary results in energy variation. Analytical solutions by the traveling wave method are compared with previous results using the perturbation method and Kotera's approach.

• 한국산업융합학회 논문집
• /
• 제27권3호
• /
• pp.547-553
• /
• 2024

Hydrogen is considered a key energy source to achieve carbon neutrality through the global goal of 'Net Zero'. Due to limitations in domestic green hydrogen production, Korean companies are interested in importing green hydrogen produced overseas. Because Australia and the Middle East possess high-quality renewable energy resources, they are attracting attention as suitable regions for producing green hydrogen using renewable energy. The cost of constructing and operating a green ammonia plant varies depending on the region. In this study, an economic feasibility comparison of green ammonia plant construction in Australia and the Middle East is conducted. Through this, it is expected to contribute to the economic analysis and feasibility analysis of the project to import hydrogen in the form of green ammonia into Korea.