• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 가을 학술논문 발표대회
• /
• pp.83-84
• /
• 2022

Zero-energy construction is being emphasized due to environmental pollution. However, in the case of external insulation using organic insulation with good insulation performance, there are many studies on inorganic insulation as it shows limitations on fire stability. In addition, as the demand for stone for exterior walls increases, Cellular Light -weight Concrete(CLC) with polymer is used to supplement fire stability and insulation performance, and the construction of stone is complemented by combining organic insulation, inorganic insulation, and stone. In this study, the compressive strength and adhesion in tension of CLC are studied. As a result of the experiment, the compressive strength of 28 days according to the polymer addition rate did not change. The adhesion in tension according to the polymer addition rate tends to increase as the addition rate increases. The target adhesion in tension is 0.8 MPa, but the maximum value of the experiment did not reach the target value, and further research was needed to combine to maintain the density and improve the adhesion in tension.

• 교육시설 논문지
• /
• 제25권4호
• /
• pp.11-18
• /
• 2018

Global warming is happening now and inevitable. Everyone knows that immediate action should be taken to slow it down, but uncertain about the effective solution. Despite global efforts to reduce greenhouse gas emissions, sea levels are rising gradually. In 2013, Cornell University announced the Climate Action Plan(CAP) to make the campus greener, to reduce waste, and to ensure efficient use of resources. In particular, they set a goal of reducing energy use by 2050 and making carbon emissions to zero. Accordingly, the purpose of this study is to analyse the case of the master plan of Cornell Tech campus and its major buildings. Mainly, The House, faculty and student housing of Cornell Tech and the world tallest certified passive house, will be the main precedent that shows the architectural planning of passive house. Passive house technology, which was thought to be possible only in single-family houses, can be applied to high-rise buildings. If any passive house technology of The House project is actively introduced into the dormitory projects of domestic universities that are about to be built or renovated, it will be a good opportunity for the university to take the lead in preparing for global warming.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 Proceedings ICPE 98 1998 International Conference on Power Electronics
• /
• pp.56-61
• /
• 1998

A soft-switching three-level chopper-inverter system was built for high-power applications like Power Conditioning System (PCS) for Superconductive Magnetic Energy Storage (SMES). The system can handle 1800-VDC, 200-A peak, and 250-kW output power. The system was designed to operate with 20-KHz PWM operation with the aid of state-of-the-art zero-current transition type soft-switching. The system is based on the Power Electronics Building Block (PEBB) concept.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2010년도 춘계학술대회
• /
• pp.942-945
• /
• 2010

분산형 전원은 에너지 실수요자 근처 혹은 건물 내부에 소형 발전설비(태양광, 풍력 발전을 포함하는 신재생에너지 발전)를 설치해 에너지 손실과 송 배전 설비를 줄이려는 노력에서 출발했다. 최근 세계적으로 기후 환경 변화에 대처하기 위해 다양한 신재생에너지를 활용하기 위한 댁내 분산형 전원 환경 시대를 예고하고 있다. 특히 태양광, 풍력 발전은 댁내에 설치하기 용이하고 가장 경제성이 뛰어나 많은 기업들이 적극적으로 사업에 진출하고 있다. 하지만 풍력 발전의 경우 바람의 세기에 따라 발전량의 변화가 심하고, 태양광은 일사량 및 일조량의 영향을 많이 받기 때문에 기후 상황에 따라 출력이 불안정하다는 단점이 있기 때문에 균일한 전력품질을 제공하기 위해 해결해야 할 기술적인 과제를 가지고 있다. 본 논문에서는 댁내에서 운용이 용이한 풍력 에너지, 태양광 에너지 및 기존 전력으로 구성되는 분산형 전원시스템에서 기후변화에 민감한 신재생에너지 발전량의 예측 방법에 대해 제안한다. 이를 바탕으로 효율적인 분산전력 관리를 가능하게 하며, 궁극적으로 제로에너지 홈을 구현하기 위한 기본 요소 기술을 제공하는 것이 본 논문의 목표이다.

• Wind and Structures
• /
• 제11권4호
• /
• pp.275-289
• /
• 2008

Large eddy simulations have been performed within and over different types of urban building arrays. This paper adopted three dimensionless parameters, building frontal area density (${\lambda}_f$) the variation degree of building height (${\sigma}_h$), and the staggered degree of building range ($r_s$), to study the systematic influence of building spacing, height and layout on wind and turbulent characteristics. The following results have been achieved: (1) As ${\lambda}_f$ decrease from 0.25 to 0.18, the mean flow patterns transfer from "skimming" flow to "wake interference" flow, and as ${\lambda}_f$ decrease from 0.06 to 0.04, the mean flow patterns transfer from "wake interference" flow to "isolated roughness" flow. With increasing ${\lambda}_f$, wind velocity within arrays increases, and the vortexes in front of low buildings would break, even disappear, whereas the vortexes in front of tall buildings would strengthen and expand. Tall buildings have greater disturbance on wind than low buildings do. (2) All the wind velocity profiles and the upstream profile converge at the height of 2.5H approximately. The decay of wind velocity within the building canopy was in positive correlation with ${\lambda}_f$ and $r_s$. If the height of building arrays is variable, Macdonald's wind velocity model should be modified through introducing ${\sigma}_h$, because wind velocity decreases at the upper layers of the canopy and increases at the lower layers of the canopy. (3) The maximum of turbulence kinetic energy (TKE) always locates at 1.2 times as high as the buildings. TKE within the canopy decreases with increasing ${\lambda}_f$ and $r_s$ but the maximum of TKE are very close though ${\sigma}_h$ varies. (4) Wind velocity profile follows the logarithmic law approximately above the building canopy. The Zero-plane displacement $z_d$ heighten with increasing ${\lambda}_f$, whereas the maximum of and Roughness length $z_0$ occurs when ${\lambda}_f$ is about 0.14. $z_d$ and $z_0$ heighten linearly with ${\sigma}_h$ and $r_s$, If ${\sigma}_h$ is large enough, $z_d$ may become higher than the average height of buildings.

• Ocean and Polar Research
• /
• 제34권2호
• /
• pp.175-183
• /
• 2012

A project to build a large oceanographic research ship was proposed to improve the level of ocean research. This paper attempts to measure the non-market benefits of the project. To this end, the dichotomous choice contingent valuation method is used. In particular, the recently proposed one and one-half bounded model is applied. The model can reduce the potential for response bias compared to the double bounded model, while maintaining much of its efficiency. Moreover, in order to deal with zero WTP observations, a spike model is adjusted for our data. A survey of 500 randomly selected households was implemented in the Metropolitan area. The respondents were asked in person-to-person interviews about how they would be willing to pay for implementing the project. Overall, respondents accepted the contingent market, and were willing to contribute a significant amount (3,244 won), on average, per household per year. The aggregate value of the project nationwide would amount to approximately 40.1 billion won per year.

• 한국농촌건축학회논문집
• /
• 제15권1호
• /
• pp.21-28
• /
• 2013

Problems of housing, healthcare, social exchanges, and lonely feelings of vulnerable social groups such as the elderly living alone in rural and fishing villages should be resolved by guaranteeing minimum residential rights and levels to restore the sense of self-esteem and social stability and to maintain the rural communities and these should be the object of social interest and support. The housing problems of rural and fishing villages should be resolved not through supply to meet demand but by beginning with providing the ways to attain mutual interaction through the program that recognizes housing as merit goods to maintain the regional communities This research examines more minutely the problems caused by poor housing conditions of rural and fishing villages and attempts to present rural and fishing village type community living home as an alternative through regeneration. The results of this research are as follows. First, the administrative support system should be built to support the community living home in its beginning, process, completion, and even post management. Second, education for reinforcing capabilities to help understand the community living home should continually conducted on the occupants, villagers, and related organizations. Third, in order to expand the community living home, research and development should be made so that the zero-energy house, the alternative energy utilizing house, etc. can be widely used. In building community living home for vulnerable social groups in rural and fishing villages, practical alternatives suitable to the regional realities should be presented and practiced so that the community living home can be built to the satisfaction of all the villagers and the occupants, and the improvement measures should be presented through constant interest and monitoring.

• 한국태양에너지학회 논문집
• /
• 제36권2호
• /
• pp.19-29
• /
• 2016

Whilst there are growing interests in pursuing energy efficiency and zero-energy buildings in built environment, it is widely recognised that Building-Integrated Photovoltaic (BIPV) is one of the most promising and required technologies to achieve these goals in recent years. Although BIPV is a broadly utilized technique in variety of fields in built environments, it is required that generation of BIVP should be analysed and calculated by external specialists. The aim of this research is to focus on developing a new diagram for prediction of the pre-estimation model in early design stage to harness solar radiation data, PV types, slopes, azimuth and so forth. The results of this study show as follows: 1) We analysed 162 districts in a national level and the examined areas were categorised into five zones. The standard deviation of the results was 2.9 per cent; 2) The increased value of solar radiation on a vertical plane in five categorised zones was 42kWh/m3, and the result was similar to the average value of 43.8kWh/m3; and 3) The pre-estimation of diagram was developed based on the categorisation of zones and azimuth as well as the results of the developed diagram showed little difference compared to the previously utilised method. The suggested diagram in this paper will contribute to estimate BIPV without any external contribution to calculate the value. Even though the result of this study shows little difference, it is required to investigate a number of different variables such as BIPV types, modules, slope angle and so forth in order to develop an integrated pre-estimation diagram.

• 한국표면공학회지
• /
• 제56권4호
• /
• pp.233-242
• /
• 2023

In recent years, energy-management studies in buildings have proven useful for energy savings. Typically, during heating and cooling, the energy from a given building is lost through its windows. Generally, to block the entry of ultraviolet (UV) and infrared (IR) rays, thin films of deposited metals or metal oxides are used, and the blocking of UV and IR rays by these thin films depends on the materials deposited on them. Therefore, by controlling the thicknesses and densities of the thin films, improving the transmittance of visible light and the blocking of heat rays such as UV and IR may be possible. Such improvements can be realized not only by changing the two-dimensional thin films but also by altering the zero-dimensional (0-D) nanostructures deposited on the films. In this study, 0-D nanoparticles were synthesized using a sol -gel procedure. The synthesized nanoparticles were deposited as deep coatings on polymer and glass substrates. Through spectral analysis in the UV-visible (vis) region, thin-film layers of deposited zinc oxide nanoparticles blocked >95 % of UV rays. For high transmittance in the visible-light region and low transmittance in the IR and UV regions, hybrid multiple layers of silica nanoparticles, zinc oxide particles, and fluorine-doped tin oxide nanoparticles were formed on glass and polymer substrates. Spectrophotometry in the UV-vis-near-IR regions revealed that the substrates prevented heat loss well. The glass and polymer substrates achieved transmittance values of 80 % in the visible-light region, 50 % to 60 % in the IR region, and 90 % in the UV region.

• Journal of Power Electronics
• /
• 제9권5호
• /
• pp.691-699
• /
• 2009

This paper presents the analysis of series active power filter for reactive power compensation, load balancing, harmonic elimination, and neutral current eradication in three-phase four-wire power systems. Generally, the three-phase four-wire system is widely employed in distributing electric energy to several office building and manufacturing plants. In such systems, the third harmonic and its 3rd harmonics are termed as triple and zero sequence components that do not cancel each other in the system neutral. Consequently, the triple harmonics add together creating a primary source of excessive neutral current. Regarding this concern, this paper presents a new control algorithm for a series hybrid active system, whereas the control approach it adopts directly influence its compensation characteristics. Hence, the advantage of this control algorithm is the direct extraction of compensation voltage reference without phase transformations and multiplying harmonic current value by gain and the required rating of the series active filter is much smaller than that of a conventional shunt active power filter. In order to show the effectiveness of the proposed control algorithm, experiments have been carried out.