• Journal of Power System Engineering
• /
• v.6 no.4
• /
• pp.23-29
• /
• 2002

This paper is studied to investigate the effect of slits and swirl vanes on the main flow fields of a gun-type gas burner through X-Y plane and Y-Z plane respectively by using X-probe from hot-wire anemometer system. This experiment was carried out with flow rate $450{\ell}/min$ in respective burner models installed in the test section of a subsonic wind tunnel. The burner models with only slits and only swirl vanes respectively were made by modifying original gun-type gas burner. The fast jet flow spurted from slits played a role such as an air-curtain because it encircled rotational flow by swirl vanes and drives mixed main flow to axial direction. As a result, the gun-type gas burner had a wider flow range up to about Y/R=1.5 deviated from slits and maintains a comparatively large velocity in the central part of burner within the range of about X/R=2.5. Therefore, it was very desirable that swirl vanes were installed within slits in gun-type gas burner in order to control the main flow fields effectively.

• Tribology and Lubricants
• /
• v.31 no.6
• /
• pp.287-293
• /
• 2015

Laser surface texturing (LST), a surface engineering modification, has been considered as one of the new processes used to improve tribological characteristics of materials by creating artificially patterned microstructure on the contact surface of mechanical components. In LST technology, the laser is optimized to obtain or manufacture the dimples with maximum precision. The micro-dimples reduce the coefficients of friction and also improve the wear resistance of materials. This study investigates the effect of dimple density is investigated. For this purpose, a ball-on-disc type tester is used with AISI 52100 bearing steel as the test material. Discs are textured with a 5% and 10% dimple density. Experimental work is performed with normal loads of 5 N, 10 N, and 15 N under a fixed speed of 150 rpm at room temperature. The effect of the textured surface is compared to that of the untextured one. Experimental results show that the textured surface yields lower friction coefficients compared to those of untextured surfaces. Specifically, the 10% dimple density textured surface shows better friction reduction behavior than the 5% dimple density textured sample, and has an 18% improvement in friction reduction compared with the untextured samples. Microscopic observation using a scanning electron microscope (SEM) shows that the major friction mechanisms of the AISI 52100 bearing steel are adhesion, plastic deformation, and ploughing.

• Food Science and Biotechnology
• /
• v.27 no.6
• /
• pp.1801-1809
• /
• 2018

In the current study investigated the protective effects of citrus based mixture drinks (CBMDs) using oxidative stress in human dermal fibroblast (HDF) cells and restraint-stressed rats. The CBMDs contained citrus bioflavonoids including narirutin and hesperidin. The cell viability of HDF cells treated with $H_2O_2$ was observed at 53.9% but treated with CBMD-1 and CBMD-2 ($500{\mu}g/mL$) on $H_2O_2$ exposed HDF cells significantly increased the relative cell viability at 65.0 and 72.2%, respectively. In the treadmill test, the time spent on the electrode plate in the restraint-stressed group was analyzed 24.1 s, but restraint-stressed rats with administered CBMDs (300 mg/kg) had significantly decreased the time at 2.4 (CBMD-1) and 4.7 (CBMD-2) s, respectively. In addition, number of touches the electrode plate in restraint-stressed group was observed at 42.4 ea, but, restraint-stressed rats with administered CBMD-1 and CBMD-2 (300 mg/kg) were significantly decreased at 7.0 and 10.2 ea, respectively.

• Wind and Structures
• /
• v.4 no.6
• /
• pp.505-518
• /
• 2001

Shantou Bay Bridge is the first long-span suspension bridge in China. Because of its location near the Shantou Seaport and its exposure to high typhoon winds, wind-resistant studies are necessary to be made. In this paper, critical flutter wind speeds and buffeting responses of this bridge at its operation and main construction stages are investigated. The Buffeting Response Spectrum method is first briefly presented. Then the sectional model test is carried out to directly obtain the critical flutter wind speed and to identify the flutter derivatives, which are adopted for the later analysis of the buffeting responses using the Buffeting Response Spectrum method. Finally the aeroelastic full bridge model is tested to further investigate the dynamic effects of the bridge. The results from the tests and the computations indicate that the flutter and buffeting behaviors of the Shantou Bay Bridge are satisfied.

• Structural Engineering and Mechanics
• /
• v.20 no.4
• /
• pp.421-434
• /
• 2005

In this paper, the finite element method is applied to investigate the effect of the lateral boundary in homogenous soil on the seismic response of a superstructure. Some influencing factors are presented and discussed, and several parameters are identified to be important for conducting soil-structure interaction experiments on shaking tables. Numerical results show that the cross-section width L, thickness H, wave propagation velocity and lateral boundaries of soil layer have certain influences on the computational accuracy. The dimensionless parameter L/H is the most significant one among the influencing factors. In other words, a greater depth of soil layer near the foundation should be considered in shaking table tests as the thickness of the soil layer increases, which can be regarded as a linear relationship approximately. It is also found that the wave propagation velocity in soil layer affects the numerical accuracy and it is suggested to consider a greater depth of the soil layer as the wave propagation velocity increases. A numerical study on a soil-structure experimental model with a rubber ring surrounding the soil on a shaking table is also conducted. It is found the rubber ring has great effect on the soil-structure interaction experiments on shaking table. The experimental precision can be improved by reasonably choosing the elastic parameter and width of the rubber ring.

• Wind and Structures
• /
• v.17 no.5
• /
• pp.495-513
• /
• 2013

Thin, high-strength steel roof cladding is widely used in residential and industrial low-rise buildings and is susceptible to failure during severe wind storms such as cyclones. Current cladding design is heavily reliant on experimental testing for the determination of roof cladding performance. Further study is necessary to evolve current design standards, and numerical modelling of roof cladding can provide an efficient and cost effective means of studying the response of cladding in great detail. This paper details the development of a numerical model that can simulate the static response of corrugated roof cladding. Finite element analysis (FEA) was utilised to determine the response of corrugated cladding subject to a static wind pressure, which included the anisotropic material properties and strain-hardening characteristics of the thin steel roof cladding. The model was then validated by comparing the numerical data with corresponding experimental test results. Based on this comparison, the model was found to successfully predict the fastener reaction, deflection and the characteristics in deformed shape of the cladding. The validated numerical model was then used to predict the response of the cladding subject to a design cyclone pressure trace, excluding fatigue effects, to demonstrate the potential of the model to investigate more complicated loading circumstances.

• Geomechanics and Engineering
• /
• v.18 no.6
• /
• pp.595-603
• /
• 2019

A modified model combining Kriging and Monte Carlo method (MC) is proposed for probabilistic estimation of tunnel face stability in this paper. In the model, a novel uniform design is adopted to train the Kriging, instead of the existing active learning function. It has advantage of avoiding addition of new training points iteratively, and greatly saves the computational time in model training. The kinematic approach of limit analysis is employed to define the deterministic computational model of face failure, in which the Hoek-Brown failure criterion is introduced to account for the nonlinear behaviors of rock mass. The trained Kriging is used as a surrogate model to perform MC with dramatic reduction of calls to actual limit state function. The parameters in Hoek-Brown failure criterion are considered as random variables in the analysis. The failure probability is estimated by direct MC to test the accuracy and efficiency of the proposed probabilistic model. The influences of uncertainty level, correlation relationship and distribution type of random variables are further discussed using the proposed approach. In summary, the probabilistic model is an accurate and economical alternative to perform probabilistic stability analysis of tunnel face excavated in spatially random Hoek- Brown media.

• The Journal of Korean Academic Society of Nursing Education
• /
• v.27 no.2
• /
• pp.144-151
• /
• 2021

Purpose: The purpose of this study was to investigate the mediating effect of optimism on the relationship between grit and learning flow in nursing college students. Methods: Structured self-reported questionnaires were used to measure grit, optimism and learning flow. The study was conducted on 200 nursing students in P, U and J cities between September 1 and September 20, 2020. The data were analyzed using a t-test, one-way ANOVA, Pearson's correlation coefficients and hierarchical multiple linear regression with SPSS/WIN 23.0. Results: Significant relationships were found between learning flow and grit (r=.60, p<.001), between learning flow and optimism (r=.42, p<.001), and between grit and optimism (r=.42, p<.001). Additionally, optimism had a partial mediating effect on the relationship between grit and learning flow (Z=3.11, p<.001). Conclusion: These results indicate that interventions to increase the level of grit along with optimism is necessary in order to increase the level of nursing college students' learning flow.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.1
• /
• pp.841-850
• /
• 2021

This study aims to evaluate the relationship between bank capital, efficiency, and risk in Islamic banks. We use data from 129 Islamic banks in the world, retrieved from various data sources. We retrieved specific banking data from Moody's Analytics BankFocus and Thomson Reuters Eikon, while data at the country level was obtained from the World Bank website. This study uses various estimates both Pooled OLS (Ordinary Least Square) and Random Effect (RE). However, to overcome the issue of serial correlation which could cause bias in the results of the study, we used fixed-effect (FE) cluster estimates. The research results confirm the previous findings that bank capital positively affects bank stability (natural logarithm of Z-Score) and negatively affects credit risk (loan loss provision to total liabilities). The findings also show that efficiency has the same effect. The interaction test of bank capital and efficiency shows that efficiency encourages banks to reduce risk, including when bank capital is relatively lower. This finding is expected to have implications for the authorities to boost bank efficiency in addition to establishing several regulations related to capital. The efficiency implemented by the bank will encourage banks to act prudently so that the bank can maintain its performance through risk mitigation.

• Korean Journal of Materials Research
• /
• v.31 no.5
• /
• pp.245-254
• /
• 2021

Wire arc additive manufacturing (WAAM) is being considered as a technology to replace the conventional manufacturing process of titanium alloys. However, coarse β grains, which can extend through several deposited materials, result in strong textures and anisotropy. As a solution, we study the plastic deformation effects of ultrasonic needle peening (UNP) on the microstructure. UNP treated materials deform plastically and the dislocation density increases. Fine α+α' grains with low aspect ratio are observed in the UNP treated specimens. UNP treated WAAM Ti-6Al-4V alloys have higher strength and lower elongation than those characteristics of WAAM Ti-6Al-4V alloys. Due to UNP treatment, the z-axis directional specimens exhibit a greater effect of reducing elongation than do the x-axis directional specimens. The UNP treatment produces fine grains in proportion to the number of times UNP is performed, thereby increasing strength. UNP processes produce a large number of dislocations in the WAAM Ti-6Al-4V alloys, with the most dislocations being formed at the surface.