• Journal of the Korean Magnetics Society
• /
• v.9 no.3
• /
• pp.131-135
• /
• 1999

The electronic structures and properties of layered perovskite $LaSrMnO_4$ and $SR^2MnO_4$ have been determined using the local-density full potential Imearized augmented plane wave method. The total energy calculations show that the antiterromagnetic state has lower energy than the ferromagnetic state in $LaSrMnO_4$. The jahn-Teller distortion of Mn-O octahedron produces the energy gap and the $3z^2-r^2$ orbital ordering, which stabilizes 2 dimensional antiferromagnetis state.

• The Journal of Engineering Geology
• /
• v.12 no.4
• /
• pp.405-419
• /
• 2002

Fracture roughness of rock specimens is observed by a new confocal laser scanning microscope (CLSM; Olympus OLS1100). The wave length of laser is 488 nm, and the laser scanning is managed by a light polarization method using two galvano-meter scanner mirrors. The function of laser reflection auto-focusing enables us to measure line data fast and precisely. The system improves resolution in the light axis (namely z) direction because of the confocal optics. Using the CLSM, it is Possible to measure a specimen of the size up to $10{\;}{\times}{\;}10{\;}cm$ which is fixed on a specially designed stage. A sampling is managed in a spacing $2.5{\;}\mu\textrm{m}$ along x and y directions. The highest measurement resolution of z direction is $10{\;}\mu\textrm{m}$, which is more accurate than other methods. Core specimens of coarse and fine grained granite are provided. Fractures are artificially maneuvered by a Brazilian test method. Measurements are performed along three scan lines on each fracture surface. The measured data are represented as 2-D and 3-D digital images showing detailed features of roughness. Line profiles of the coarse granites represent more frequent change of undulation than those of the fine granite. Spectral analyses by the fast Fourier transform (FFT) are performed to characterize the roughness data quantitatively and to identify influential frequency of roughness. The FFT results suggest that a specimen loaded by large and low frequency energy tends to have high values of undulation change and large wave length of fracture roughness.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.94-94
• /
• 2011

최근에 산악지역에서의 국지성 강우에 의한 사고 발생이 증가하고 있고, 2009년에는 북한의 무단 댐방류로 인해 인명피해가 발생함에 따라서 산악이나 북한 지역과 같은 지역의 모니터링이 필요하게 되었으며, 강수량의 기후학적 분포의 특성과 같은 장기적인 강수량 정보가 필요하게 되었다. 레이더는 넓은 영역에 대해서 시 공간적으로 고해상도의 자료를 제공할 수 있기 때문에 국지 규모의 단시간 강수량 정보를 제공하는데 유용하다. 국립기상연구소(National Institute of Meteorological Research; NIMR)는 기존의 층운형 Z-R 관계식(Z=$200R^{1.6}$, Marshall-Palmer, 1948)을 이용한 레이더 강우강도 산출에서 과소추정 문제를 개선하기 위해 레이더-AWS 강우강도(Radar-AWS Rain rate; RAR) 산출 시스템을 개발하여 현재 운영하고 있다. RAR 산출 알고리즘은 각 레이더에 대해서 레이더 강우강도와 지상 AWS 우량계 자료를 비교하여 실시간으로 Z-R 관계식을 산출하여, 레이더 반사도를 강우강도로 변환하고, 이를 합성하여 한반도 영역에 대해서 강우강도 정보를 제공한다. 2010년에는 RAR 자료와 지상 AWS 우량계 자료를 이용하여 레이더-AWS 누적강수량을 산출하는 시스템을 구축하였으며, 현재 시험운영 중에 있다. 본 연구에서는 레이더-AWS 누적강수량의 정확도를 평가하기 위해서 2009년에 대해 레이더-AWS 누적강수량 자료와 지상 AWS 누적강수량 자료에 대해 RMSE, Bias 등의 통계값을 산출하였으며, 북한 지역에 대한 적용가능성을 분석하기 위해서 레이더 관측 반경 내의 북한 지역의 GTS 지점 자료를 이용하여 사례 분석하였다. 본 연구는 레이더 자료를 이용한 지상 관측 공백지역의 강수량에 대한 모니터링을 통하여 이러한 지역의 사고에 대비할 수 있고, 기후학적인 강수량 정보 제공 및 향후 유역별 레이더 면적강수지도 시험판 개발을 통하여 수문 기상 분야에 적용하여 효과적인 물관리에 기여할 수 있을 것으로 사료된다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.378-382
• /
• 2010

Horseback riding, shooting, golf and other sports that make up the visuals, the background graphics in the game is an important factor influencing the outcome. But they need to play directly from the site is limited, and sports simulation games and the realistic representation of real-time operation since the fall of the background. In this paper, to overcome the limitations in the field for the game by converting pictures 3d graphic modeling. z-depth by using a special technique for expressing the perspective of the analysis of the sport and VR (virtual reality) simulation to study the background to the development. In this study, background realistic VR implementation of sport Journal of Sports Science and will contribute to the development.

• Korean Journal of Optics and Photonics
• /
• v.17 no.5
• /
• pp.447-454
• /
• 2006

We obtained analytic solutions of boundary conditions to the stable region of Z-fold $Cr^{4+}$ : YAG laser cavity when the conditions are with and without thermal tensing effect. Also we investigated the influence of the thermal tensing effect on the stability of cavity, beam waist, and astigmatic compensation using aberration transformation matrices. The thermal tensing effect almost has no influence on the stable region of the cavity when the crystal is located in the middle of two concave mirrors and when the distances from the concave mirror to the reflecting mirror and the output coupler are the same. The beam waist, however, is affected more in a tangential plane than in a sagittal plane, and so it is difficult to have astigmatic compensation when the thermal tensing effect exists. This result means that the thermal tensing effect should be considered even for the Kerr-lens mode-locking.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.7 no.2
• /
• pp.47-54
• /
• 1982

In this paper, a improved per-channel PCM Coder with 1-bit interpolation is proposed. The coder converts a telephone signal to 15-segments u-law PCM signal of a large dynamic range. The A/D conversion technique of the proposed converter requires a feedback loop around a quantizer operates at high speed, and a accumulater for accumulating the quantized values to provide PCM outputs. To obtain both linear and compressed PCM signals a improved table look-up method is presented. The operations of the proposed converter are certified through the experiments to be good. The experimental circuit comprises TTL logic gates, a resistive D/Z converter and a simple differential amplifier. From the results of the experiments, it is known that the proposed converter has many advantage to be adopted economically for per-channel onverter used in rural area service.

• Journal of radiological science and technology
• /
• v.36 no.2
• /
• pp.123-129
• /
• 2013

This study investigated the rate of setup variance by the rotating unbalance of gantry in image-guided radiation therapy. The equipments used linear accelerator(Elekta Synergy TM, UK) and a three-dimensional volume imaging mode(3D Volume View) in cone beam computed tomography(CBCT) system. 2D images obtained by rotating $360^{\circ}$and $180^{\circ}$ were reconstructed to 3D image. Catpan503 phantom and homogeneous phantom were used to measure the setup errors. Ball-bearing phantom was used to check the rotation axis of the CBCT. The volume image from CBCT using Catphan503 phantom and homogeneous phantom were analyzed and compared to images from conventional CT in the six dimensional view(X, Y, Z, Roll, Pitch, and Yaw). The variance ratio of setup error were difference in X 0.6 mm, Y 0.5 mm Z 0.5 mm when the gantry rotated $360^{\circ}$ in orthogonal coordinate. whereas rotated $180^{\circ}$, the error measured 0.9 mm, 0.2 mm, 0.3 mm in X, Y, Z respectively. In the rotating coordinates, the more increased the rotating unbalance, the more raised average ratio of setup errors. The resolution of CBCT images showed 2 level of difference in the table recommended. CBCT had a good agreement compared to each recommended values which is the mechanical safety, geometry accuracy and image quality. The rotating unbalance of gentry vary hardly in orthogonal coordinate. However, in rotating coordinate of gantry exceeded the ${\pm}1^{\circ}$ of recommended value. Therefore, when we do sophisticated radiation therapy six dimensional correction is needed.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.35C no.6
• /
• pp.39-47
• /
• 1998

A fourth-order $\Sigma$-$\Delta$ modulator is designed and implemented in 0.6 $\mu\textrm{m}$ CMOS technology. The modulator is verified by introducing nonlinear factors such as DC gain and slew rate in system model that determines the transfer function in S-domain and in time-domain. Dynamic range is more than 110 dB and the peak SM is 102.6 dB at a clock rate of 2.8224 MHz for voiceband signal. The structure of a ∑-$\Delta$ modulator is a modified fourth-order ∑-$\Delta$ modulator using direct feedback loop method, which improves performance and consumes less power. The transmission zero for noise is located in the first-second integrator loop, which reduces entire size of capacitors, reduces the active area of the chip, improves the performance, and reduces power dissipation. The system is stable because the output variation with respect to unit time is small compared with that of the third integrator. It is easy to implement because the size of the capacitor in the first integrator, and the size of the third integrator is small because we use the noise reduction technique. This paper represents a new design method by modeling that conceptually decides transfer function in S-domain and in Z-domain, determines the cutoff frequency of signal, maximizes signal power in each integrator, and decides optimal transmission-zero frequency for noise. The active area of the prototype chip is 5.25$\textrm{mm}^2$, and it dissipates 10 mW of power from a 5V supply.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.231-234
• /
• 2007

The magnetic sensor using electromagnetic principle. which transfers magnatic into electric. is the electric component.It has been widely applied to the industry, university and the reseach. However there are some problems. Not only the korean domestic sensor manufacture skills are still lower then the advanced manufacture's but also production of sensor is not well organized yet. Due to cahnging excitation cvurrent, excitation freq and the rate magnetic permeability core, there sometimes would be distorted phenomena or loaded phenomena which result in limited measurment range. Therefore, the signal conversion device should support to receive undistorted and nice output. This paper focuses on both the design of signal transform circuit using inductive proximity sensor and the signal transfer equipment (Z device) which detects thickness of painted material.

• KIPS Transactions on Software and Data Engineering
• /
• v.9 no.1
• /
• pp.11-16
• /
• 2020

3D printing is one of the emerging technologies and getting a lot of attention. To do 3D printing, 3D model is first generated, and then converted to G-code which is 3D printer's operations. Facet, which is a small triangle, represents a small surface of 3D model. Depending on the height or precision of the 3D model, the number of facets becomes very large and so the conversion time from 3D model to G-code takes longer. Apach Hadoop is a software framework to support distributed processing for large data set and its application range gets widening. In this paper, Hadoop is used to do the conversion works time-efficient way. 2-phase distributed algorithm is developed first. In the algorithm, all facets are sorted according to its lowest Z-value, divided into N parts, and converted on several nodes independently. The algorithm is implemented in four steps; preprocessing - Map - Shuffling - Reduce of Hadoop. Finally, to show the performance evaluation, Hadoop systems are set up and converts testing 3D model while changing the height or precision.