• 한국작물학회지
• /
• 제47권3호
• /
• pp.151-156
• /
• 2002

초다수성 품종 개발의 기초자료로 활용하고자 새로이 도입된 신초형 소얼 수중형 유전자원을 이용하여 F$_2$-F$_{5}$상관에 의한 sink-source관련 형질의 유전력을 추정한 결과를 요약하면 아래와 같다. 1. 일품벼에 YR15965 Acp 33이 교배된 F2와 F5세대간 상관정도에 의해 추정된 sink 및 source관련 형질들의 유전력은 specific leaf area, sink-source ratio와 harvest index의 0.009, 0.121, 0.013을 제외한 모든 형질에서 0.224이상의 높은 유전력을 보였다. 2. IR 66738-118-1-2에 가야벼가 교배된 후대에서는 모든 sink 및 source관련 형질이 0.001-0.286의 낮은 유전력을 보였다. 3. Sink 및 source관련 형질들과 수량과는 두 조합 모두 높은 싱관정도를 보였으나 등숙률과는 IR 66738-118-1-2에 가야벼가 교배된 후대에서는 대부분의 형질이 상관이 없었다. 그러나 일품벼에 YR 15965Acp33의 교배 후대에서는 등숙율과 source형질과는 높은 정상관이, sink capacity와 sink-source ratio등 sink형질과는 유의한 부의 상관이 있었다.

• 한국산림과학회지
• /
• 제99권4호
• /
• pp.479-486
• /
• 2010

당해년도 송이 생산량 추이와 가격 예측을 위하여 수매되는 송이의 일자별 생산량과 품질등급의 관련성을 분석하였다. 2000년부터 2008년까지의 9년간 영덕군 산림조합의 수매자료를 분석한 결과, 송이 수매량 변화와 각 품질등급이 차지하는 비율은 극심한 가뭄과 이상기온 등 특이한 해를 제외하면, 고급품(1등급과 2등급) 송이는 초기에 50%를 넘는 비율을 차지하다가 점차 줄어드는 모습을 나타낸 반면, 저급품(개산품, 파손품 및 벌레 먹은 것 등)의 경우에는 수매량이 정점을 이룬 이후에 지속적으로 그 비율이 증가하는 것으로 나타났다. 송이 수매량이 정점에 도달하기 1~9일 전에 고급품의 비율과 저급품의 비율이 반전되었으며, 이를 통하여 고급품 송이에 비하여 개산품의 비율이 많아지면 조만간 송이 생산량이 줄어들게 됨을 예측할 수 있었다. 고급품 송이가 차지하는 비율은 전체 수매량의 패턴과 비슷하지만 3~4일 정도 앞서 나가는 모습을 보여주고 있었으며, 매일의 송이 수매량은 3~4일 전의 고급품 수매량과 0.5 이상(3일전의 상관계수는 0.51, 4일전은 0.54)의 상관관계를 나타내었다. 따라서 송이 수매품의 품질등급 분포 검토를 통해 예측하는 해당 시점 이후의 송이 생산량 추이(증가 또는 감소 여부)를 예측할 수 있다고 판단되었다. 또한, 고급품 송이 가격은 수매량과 반비례하는 관계가 뚜렷하게 나타난다. 따라서 송이 수매량 추이는 송이 가격변화를 예측할 수 있는 정보를 제공하게 되므로 송이 유통에서도 중요한 역할을 할 수 있음을 알 수 있었다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1992년도 봄 학술발표회 논문집
• /
• pp.80-85
• /
• 1992

A nonlinear second-order analysis program that properly describes the nonlinear behavior of concrete was developed by using the layering technique. As the slenderness ratio of column is increased, the peaks of P-M curve lie remote from the section interaction diagram for the same eccentricities. But the peaks of P-M curve lie rather close to the section interaction diagram for very large eccentricities. In this study , the effects of compressive strength of concrete, longitudinal steel ratio, and yield strength of steel on second-order moment of concrete columns were analyzed. As the compressive strength of concrete and the yield strength of steel are increased, the ratio of peak axial force to maximum axial strength for concentrically loaded short column( Pu/Po) is decreased. But as the longitudinal steel ratio is increased, the ratio , Pu/Po increases.

• Mycobiology
• /
• 제43권4호
• /
• pp.423-434
• /
• 2015

The study was conducted to compare the effects of different agro-wastes on the growth, yield, and nutritional composition of oyster mushrooms Pleurotus ostreatus (PO) and Pleurotus cystidiosus (PC). Seven substrate formulas including sawdust (SD), corncob (CC), sugarcane bagasse (SB) alone and in combination of 80 : 20, 50 : 50 ratio between SD and CC, SD and SB were investigated. The results indicated that different substrate formulas gave a significant difference in total colonization period, characteristics of fruiting bodies, yield, biological efficiency (BE), nutritional composition and mineral contents of two oyster mushrooms PO and PC. The results showed that increasing CC and SB reduced C/N ratio, and enhanced some mineral contents (Ca, P, and Mg) of substrate formulas. The increased amount of CC and SB of substrate formulas enhanced protein, ash, mineral contents (Ca, K, Mg, Mn, and Zn) of fruiting bodies of both mushrooms. Substrates with 100% CC and 100% SB were the most suitable substrate formulas for cultivation of oyster mushrooms PO and PC in which they gave the highest values of cap diameter, stipe thickness, mushroom weight, yield, BE, protein, fiber, ash, mineral content (Ca, K, and Mg) and short stipe length. However, substrate formula 100% CC gave the slowest time for the first harvest of both mushrooms PO and PC (46.02 days and 64.24 days, respectively). It is also found that the C/N ratio of substrate formulas has close correlation with total colonization period, mushroom weight, yield, BE and protein content of mushroom PO and PC.

• 한국산학기술학회논문지
• /
• 제16권9호
• /
• pp.6391-6396
• /
• 2015

2차원 응력조건에 대한 von Mises 항복기준의 특징을 살펴보기 위해 탄성변형률이 0이 되는 평면변형률 조건과 소성변형률증분이 0이 되는 평면변형률 조건을 고려해 보았다. 탄성변형률이 0인 평면변형률조건을 통해 얻은 항복함수와 평면응력조건에서의 항복함수는 기하학적으로 타원을 나타내는데 두 경우에 대한 기하하적 비교를 타원의 장, 단축의 길이비와 이심률의 비로 나타낼 때 단축비는 같았으나 장축비 및 이심률의 비는 포아송비의 함수로 표현되었다. 탄성변형률이 0인 평면변형률조건을 통해 얻은 von Mises 항복기준에 대하여 탄성거동을 보이는 영역은 포아송비가 커짐에 따라 넓어짐을 알 수 있었다. 소성변형률증분이 0인 평면변형률조건을 통해 관련유동법칙을 써서 항복함수를 구하였는데 기하하적으로 볼 때 평면응력조건에서의 항복함수가 타원임과는 달리 직선을 나타내었으며 평면응력조건일 때보다 탄성거동영역이 컸다.

• 한국버섯학회지
• /
• 제13권4호
• /
• pp.310-313
• /
• 2015

산느타리버섯 '호산', '화산' 품종을 대상으로 강원도농업기술원에서 개발한 배지와 농가에서 사용하는 배지를 가지고 수확후배지 첨가율에 따른 생육 및 수량특성 조사결과, 강원도에서 개발한 배지에서는 호산품종에서는 대조구에 비해 수량 차이가 거의 없었고, 화산에서는 20%까지 수량이 증가하였다. 농가에서 사용하는 배지에서는 호산품종은 20%까지 수량 차이가 없었고 30%에서 다소 적어진 것으로 나타났다. 화산품종에서는 첨가율이 높을수록 수량이 점차 떨어지는 경향이 나타났다. 이 시험연구를 통해 산느타리버섯 수확후배지를 20%까지 재사용한다면 생산비 절감 뿐만 아니라 폐배지 폐기처리 비용 절감 등 농가소득에 기여할 것으로 여겨진다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 추계학술대회 논문집
• /
• pp.89-92
• /
• 2007

Partail oxidation(POX) of n-butane was investigated in this research by employing ceria-promoted Ni/calcium hydroxyapatite catalysts ($Ce_xNi_{2.5}Ca_{10}(OH)_2(PO_4)_6$ ; x = $0.1{\sim}0.3$) which had recently been reported to exhibit good catalytic performance in POX of methane and propane. The experiments were carried out with changing ceria content, $O_2/n-C_4H_{10}$ ratio and temperature. As the $O_2/n-C_4H_{10}$ feed ratio increased up to 2.75, n-$C_4H_{10}$ conversion and $H_2$ yield increased and the selectivity of methane and other hydrocarbons decreased. But with $O_2/n-C_4H_{10}$ = 3.0, $n-C_4H_{10}$ conversion and $H_2$ yield decreased. This is considered due to that too much oxygen may inhibit the reduction of Ni or induce the oxidation of Ni, which results in poor catalytic activity. The optimum $O_2/n-C_4H_{10}$ ratio lay between 2.50 and 2.75. $Ce_{0.1}Ni_{2.5}Ca_{10}(OH)_2(PO_4)_6$ showed the highest $n-C_4H_{10}$ conversion and $H-2$ yield on the whole. In durability tests, higher hydrogen yield and better catalyst stability were obtained with the $O_2/n-C_4H_{10}$ ratio of 2.75 than with the ratio of 2.5.

• Steel and Composite Structures
• /
• 제16권6호
• /
• pp.611-637
• /
• 2014

A single plate shear connection, or shear tab, is a very popular shear connection due to its merit in ease of construction and material economy. However, problems in understanding the connection behavior, both in terms of strength and ductility, have been well-documented. Suggestions or design model for single plate connections in AISC Design Manual have been altered several times, with the latest edition settling down to giving designers pre-calculated design strength tables if the connection details agree with given configurations. Results from many full-scale tests and finite element models in the past suggest that shear strength of a bolt group in single plate shear connections might be affected by yield strength of plate material; therefore, this research was aimed to investigate and clarify effects of plate yield strength and thickness on shear strength of the bolt group in the connections, including the validity of using a plate thickness/bolt diameter ratio ($t_p/d_b$) in design, by using finite element models. More than 20 models have been created by using ABAQUS program with 19.0- and 22.2-mm A325N bolts and A36 and Gr.50 plates with various thicknesses. Results demonstrated that increase of plate thickness or plate yield strength, with the $t_p/d_b$ ratio remained intact, could significantly reduce shear strength of the bolt group in the connection as much as 15 percent. Results also confirmed that the $t_p/d_b$ ratio is a valid indicator to be used for guaranteeing strength sufficiency. Because the actual ratio recommended by AISC Design Manual is $t_p/d_b$ + 1.6 (mm) for connections with a number of bolts less than six and plate yield strength in construction is normally higher than the nominal value used in design, it is proposed that shear strength of a bolt group in single plate connections with a number of bolts equal or greater than seven be reduced by 15 percent and the $t_p/d_b$ ratio be limited to 0.500.

• 상하수도학회지
• /
• 제28권1호
• /
• pp.55-60
• /
• 2014

Food waste leachate (FWL) is a serious pollutant waste coming from the food waste recycling facilities in Korea. FWL has a high organic matter content and high COD to nitrogen (COD/N) ratio, which can disturb efficient methane production in the anaerobic digestion of FWL. In the present study a microalga, Clorella vulgaris (C.V), was used as co-substrate for the FWL anaerobic digestion in order to supply nutrients, decrease the COD/N ratio and increase its methane yield. Different co-digestion mixtures (COD/N ratios) were studied by using biochemical methane potential test and modified Gompertz equation for kinetic study. Mixed substrate of FWL and C. vulgaris in the co-digestion clearly showed more the biomethane yield than the sole substrates. The maximum methane production, 827.7 mL-$CH_4$/g-VS added, was obtained for COD/N ratio of 24/1, whereas the highest improvement of methane yield was found for COD/N ratio of 15/1.

• Corrosion Science and Technology
• /
• 제22권1호
• /
• pp.55-63
• /
• 2023

The aim of this study was to propose a multiple linear regression (MLR) equation to predict ultimate tensile strength (UTS) of 316L stainless steel with unspecified pit corrosion. Tensile specimens with pit corrosion were prepared using a potentiostatic acceleration test method. Pit corrosion was characterized by measuring ten factors using a confocal laser microscope. Data were collected from 22 tensile tests. At 85% confidence level, total pit volume, maximum pit depth, mean ratio of surface area, and mean area were significant factors showing linear relationships with UTS. The MLR equation using these three significant factors at a 85% confidence level showed considerable prediction performance for UTS. Determination coefficient (R²) was 0.903 with training and test data sets. The yield strength ratio of 316L stainless steel was found to be around 0.85. All specimens with a pit corrosion presented a yield ratio of approximately 0.85 with R² of 0.998. Therefore, pit corrosion did not affect the yield ratio.