• Journal of the korean Society of Automotive Engineers
• /
• v.13 no.2
• /
• pp.103-111
• /
• 1991

To determine the effects of microstructure on the fatigue crack propagation behavior in SM45C steel, experimental investigations have been carried out with the specimens of different grain sizes and different spacings between the Fe$_{3}$C particles. Fatigue and tensile tests were conducted and the quantitative analysis of the relations between the threshold stress intensity range and grain size, interparticle spacing and yield stress were carried out. Some of the conclusions obtained are as follows; (1) .DELTA.K$_{th}$ was observed to increase with grain size and the spacing between the Fe3C particles. (2) In both pearlite and spheroidite microstructures, .DELTA.K$_{th}$ was increased when yield stress was decreased.sed.

• Korean Journal of Medicinal Crop Science
• /
• v.12 no.2
• /
• pp.129-134
• /
• 2004

Optimal culture conditions for efficient in vitro propagation and polysaccharide production of Orostachys japonicus were established. The highest growth yield was achieved in 1/2 MS medium, while the lowest growth yield was obtained in 4 MS medium. The patterns of polysaccharide formation were a little similar in all cases, but on MB5 medium, the po]ysaccharide contents of plant were higher than others. Among the modified nitrate levels, effective growth level were obtained in 1/4 N and 1/2 N. High contents of polysaccharide were obtained in 4 N. Different concentration of potassium and calcium did not improve the growth and polysaccharide production. The micropropagated shoots were successfully acclimatized artificial soils.

• Journal of Bio-Environment Control
• /
• v.29 no.4
• /
• pp.326-336
• /
• 2020

This study was conducted to investigate productivity of strawberry plants as affected by propagation method and cultivation system. Transplants propagated by cutting propagation and pinning propagation were planted and grown for a whole production period in soil and hydroponic cultivation systems. Growth parameters, fruit productivity, and fruit quality were measured during the whole harvest period. The results showed that propagation method and cultivation system had significant effects on vegetative growth of strawberry plants. Total fruit yield per plant and average fruit weight per fruit during the whole harvest period were significantly lower in the plants grown in soil cultivation system. Total unmarketable fruit ratio was significantly greater in soil cultivation system than that in hydroponic cultivation system. Small fruits were the primary unmarketable fruits in soil cultivation system, while malformed fruits were the primary unmarketable fruits in hydroponic cultivation system. The overall high quality of fruit was found in February, and the plants cultivated in hydroponic cultivation system had higher quality of fruit as compared with that in soil cultivation system. It is concluded that cutting propagation is better than pinning propagation, and hydroponic cultivation system is better than soil cultivation system for fruit productivity of strawberry.

• Journal of Biosystems Engineering
• /
• v.30 no.6 s.113
• /
• pp.360-365
• /
• 2005

Precision agriculture attempts to improve cropping efficiency by variable application of crop treatments such as fertilizers and pesticides, within field on a point-by-point basis. Therefore, a more complete understanding of the relationships between yield and soil properties is of critical importance in precision agriculture. In this study, the functional relationships between measured soil properties and rice yield were investigated. A supervised back-propagation neural network model was employed to relate soil chemical properties and rice yields on a point-by point basis, within individual site-years. As a results, a positive correlation was found between practical yields and predicted yields in 1999, 2000, 2001, and 2002 are 0.916, 0.879, 0.800 and 0.789, respectively. The results showed that significant overfitting for yields with only the soil chemical properties occurred so that more of environmental factors, such as climatological data, variety, cultivation method etc., would be required to predict the yield more accurately.

• Plant Biotechnology Reports
• /
• v.2 no.2
• /
• pp.163-169
• /
• 2008

Roots of Ophiorrhiza prostrata D. Don serve as a rich source of camptothecin (CPT), an anticancer drug. Because of the large-scale collection of its roots, the plant has become a threatened species. The present study accomplishes the induction of adventitious roots as a means for the production of CPT as well as for the large-scale propagation of this anticancer drug plant using leaf and internode explants. The biomass yield and CPT content of adventitious roots induced from different explants were compared to roots developed on ex vitro rooted stem cuttings. Adventitious roots were produced on half-strength Murashige and Skoog (MS) medium supplemented with $10.74{\mu}M$ ${\alpha}-naphthaleneacetic$ acid and $2.32{\mu}M$ kinetin at mean fresh weights of 0.753, 0.739 and 0.748 g roots from leaf, internode and shoot, respectively. CPT yield from in vitro derived roots after 50, 80 and 120 days of incubation (0.028, 0.06 and 0.1% dry weight, respectively) was not significantly different from those harvested at the same age from ex vitro rooted (0.03, 0.06 and 0.13%, respectively) stem cuttings. CPT from subcultured roots derived from solid (0.08%) medium was lower than from suspension culture medium (0.12%). Subsequent cultures of the adventitious roots showed a stable production of CPT (0.16%). The yield of CPT from 360-day-old plant-derived roots was 0.19%. Elicitation using methyl jasmonate and acetyl salicylic acid exhibited no enhancement in CPT yield. In vitro propagation through direct shoot regeneration was achieved from the adventitious roots upon transfer to MS medium with $8.87{\mu}M$ $N^6-benzyladenine$ (BA) and $2.46{\mu}M$ indole-3-butyric acid (IBA) with a mean of 21.2 shoots per culture in 50 days. The shoots upon subculture on medium having the same level of BA and IBA underwent rapid proliferation. The shoots transferred to field conditions after in vitro rooting exhibited 95% survival. Adventitious root induction, from leaf and internode explants, enables the feasible production of CPT as well as the large-scale rapid propagation of this species which can safeguard it from extinction.

• Korean Journal of Plant Resources
• /
• v.9 no.1
• /
• pp.71-75
• /
• 1996

Experiments were conducted to investigate the proper stem number and the propagation method of Lycium Chinense Mill. from 1993 to 1994.The results obtained were summerized as follows. The most effective propagation method was stem cutting 20cm in which flowering time was 15days earlier and dry fruit weight was 30 percent heavier(91kg/10a) than in seed propagation. The optimal diameter of cutting was 0.9cm of which dry fruit weight was 227kg/10a and 28 percent heavier compared with that of 0.5cm. stem number 5 had the best top growth and the heaviest 100 fruit weight as 13.4g. Fruit number per plant was increased as 864 in stem number 5. Dry fruit yield of stem number 5 was 104kg/10a and 16 percent increased compared with that of control.

• Agricultural and Biosystems Engineering
• /
• v.3 no.1
• /
• pp.18-28
• /
• 2002

Neural network based models were developed and evaluated for predicting corn yield from aerial images based on 1998 and 1994 image data. The model used images in multi-spectral bands such as R, G, B, and IR (Red, Green, Blue and Infrared). The inputs to the neural network consisted of mean and standard deviation of multispectral bands of the aerial images. Performances of several neural network architectures using back-propagation with momentum were compared. The maximum yield prediction accuracy obtained was 97.81%. The BPNN model prediction accuracy could be enhanced by using more number of observations to the model, other data transformation techniques, or by performing optical calibration of the aerial image.

• Korean Journal of Medicinal Crop Science
• /
• v.14 no.1
• /
• pp.41-44
• /
• 2006

This study was conducted to investigate the optimum transplanting time of Ostericum koreanum Kit. cultivating under root apex propagation. Transplanting time per 10 days were from March 20th to May 1st. The results are follows : Soil chemical properties before experiment were well adapted upland including moderate fertility. Average temperatures during cropping seasons except March late were lower than normal years, but rainfall was abundant than that of normal years. The ratios of emergence and bolting were higher in the faster transplanting time. And also plant height, stem length and number of stem were well. Yield components of transplanted April 1st were well, and yield was 251 kg/10a. The yield was increased by 13% than that of March 20th. So optimum transplanting time is considered about April 1st.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.1 s.45
• /
• pp.1-8
• /
• 2007

Although the Java bytecode has numerous advantages. there ate also shortcomings such as slow execution speed and difficulty in analysis. Therefore. in order for the Java class file to be effectively executed under the execution environment such as the network, it is necessary to convert it into optimized code. We implements CTOC. CTOC generated CFG using the existing bytecode then created the SSA Form for analysis and optimization. However. due to insertion or the ${\phi}$-function in the process of conversion into the SSA Form, the number of nodes increased. As a means of reducing the number of nodes, we performed copy propagation, which is an optimization method applicable to the SSA form. Copy propagation is the process of a value of a variable being topied to another variable. There are cases where conversion due to copy propagation alone does not yield significant effects. However, when variables are not used in the later optimization stages, copy propagation provides a means for eliminating the copy statement for the corresponding variable, making it an important step. This paper shows the copy propagation to obtain a more optimized code in SSA Form.

• Journal of Ocean Engineering and Technology
• /
• v.2 no.2
• /
• pp.122-129
• /
• 1988

Recently with the rapid development in marine and shipbuliding industries such as marine structures, ship and chemical plants, there occurs much interest in the study of corrosion fatigue characteristics which was closed up an important role in mechanical design. In this study, the 5086 Al-alloy was tested by use of rotary bending fatigue tester. The retardation effect of overload on the corrosion fatigue crack propagation in sea environment was quantitatively studied. 1) Retardation effect of corrosion fatigue crack propagation is most eminent when overload ratio is 1.52, overload magnitude corresponds to about 77% and 55% of yield strength and tensile strength respectively. 2) After overload ratio 1.52 was used, retardation of corrosion fatigue crack growth rate is largely retarded and quasi-threshold stress intensity factor range($\Delta\textrm{K}_{th}$) appears. 3) According to m of experimental constant, retardation effect of corrosion fatigue crack propagation corresponds to about 25% of constant stress amplitude when overload ratio is 1.52. 4) When overload ratio 1.52 was used, retardation parameter (RP) decreases to about 0.43 and corrosion sensitivity (S)decreses to about 2.1.