• Asian-Australasian Journal of Animal Sciences
• /
• v.25 no.8
• /
• pp.1073-1082
• /
• 2012

We first sought to clarify the effects of discounted rate, survival rate, and lactation persistency as a component trait of the selection index on net merit, defined as the first five lactation milks and herd life (HL) weighted by 1 and 0.389 (currently used in Japan), respectively, in units of genetic standard deviation. Survival rate increased the relative economic importance of later lactation traits and the first five lactation milk yields during the first 120 months from the start of the breeding scheme. In contrast, reliabilities of the estimated breeding value (EBV) in later lactation traits are lower than those of earlier lactation traits. We then sought to clarify the effects of applying single nucleotide polymorphism (SNP) on net merit to improve the reliability of EBV of later lactation traits to maximize their increased economic importance due to increase in survival rate. Net merit, selection accuracy, and HL increased by adding lactation persistency to the selection index whose component traits were only milk yields. Lactation persistency of the second and (especially) third parities contributed to increasing HL while maintaining the first five lactation milk yields compared with the selection index whose only component traits were milk yields. A selection index comprising the first three lactation milk yields and persistency accounted for 99.4% of net merit derived from a selection index whose components were identical to those for net merit. We consider that the selection index comprising the first three lactation milk yields and persistency is a practical method for increasing lifetime milk yield in the absence of data regarding HL. Applying SNP to the second- and third-lactation traits and HL increased net merit and HL by maximizing the increased economic importance of later lactation traits, reducing the effect of first-lactation milk yield on HL (genetic correlation ($r_G$) = -0.006), and by augmenting the effects of the second- and third-lactation milk yields on HL ($r_G$ = 0.118 and 0.257, respectively).

• Journal of Ginseng Research
• /
• v.18 no.3
• /
• pp.182-186
• /
• 1994

This study was conducted to define the effects of color of polyethylene (P.E.) net shading on the meteorological conditions under the shading growth status, photosynthesis and saponin contents of ginseng plant. Red and blue polyethylene net shading (4 fold) showed a good light intensity of ginseng growth, but red one not only increased air temperature but also resulted in early defoliation. Photosynthetic rate of ginseng leaves was increased in order of red, blue and black shade, Root yield and saponin contents were significantly increased red and blue net as compared with those of common straw shading. Blue color appeared to be most recommendable.

• Korean Journal of Plant Resources
• /
• v.18 no.3
• /
• pp.512-517
• /
• 2005

To establish the economical cultivation method of Gastrodia elata Blume by controlling the shading rate and the mixing ratio of recycling spawn bed logs, a serial experiment was carried out. When G. elata was grown in the field with no shading, the yield of spawn tuber was higher than that of tuber of G. elata. The yield of G. elata was high in the rainproof green house covered with one layer of $95\%$ shading net, in the rainproof green house covered with two layers of $95\%$ shading net, and in the field with no shading, in that order. In the case of mixing ratio of recycling spawn bed logs, the yield was high in the fresh logs, in the mixing ratio of 2:1, and the ratio of 1:1, in that order. The income of the rainproof green house covered with one layer of $ 95\%$ shading net which brought the best yield was $81\%$ in the mixing ratio of 2:1 over the fresh logs.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1992.06a
• /
• pp.23-28
• /
• 1992

The purpose of this paper is to develop a new adaptive echo canceller improving convergence speed and near-end-talker detection performance of the conventional echo canceller. In a conventional adaptive echo canceller, an adaptive digital filter with TDL(Tapped-Delay Line) structure modelling the echo path uses the LMS(Least Mean Square) algorithm to cote the coefficients, and NET detector using energy comparison method prevents the adaptive digital filter to update the coefficients during the periods of the NET signal presence. The convergence speed of the LMS algorithm depends on the eigenvalue spread ratio of the reference signal and NET detector using the energy comparison method yields poor detection performance if the magnitude of the NET signal is small. This paper presents a new adaptive echo canceller which uses the pre-whitening filter to improve the convergence speed of the LMS algorithm. The pre-whitening filter is realized by using a low-order lattice predictor. Also, a new NET signal detection algorithm is presented, where the start point of the NET signal is detected by computing the cross-correlation coefficient between the primary input and the ADF(Adaptive Digital Filter) output while the end point is detected by using the energy comparison method. The simulation results show that the convergence speed of the proposed adaptive echo canceller is faster than that of the conventional echo canceller and the cross-correlation coefficient yield more accurate detection of the start point of the NET signal.

• Nuclear Engineering and Technology
• /
• v.53 no.9
• /
• pp.3012-3017
• /
• 2021

The spatial distribution and the energy spectrum of the neutron yield were investigated with the neutron activation analysis and MCNP simulation was carried out to verify the analysis results and to extend the results to a 3D mapping of the neutron yield distribution in the KSTAR. High purity Ni specimen was selected in the neutron activation analysis. Total neutron yields turned out to be 3.76 × 10¹² n/s - 7.56 × 10¹² n/s at the outer vessel of the KSTAR, two orders of magnitude lower than those at the inner vessel of the KSTAR, which demonstrates the attenuation of neutron yield while passing through the different structural materials of the reactor. Based on the fully expanded 3D simulation results, 2D cross-sectional distributions of the neutron yield on XY and ZX planes of KSTAR were examined. The results reveal that the neutron yield has its maximum concentration near the center of blanket and decreases with increasing proximity to the vacuum vessel wall.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.36 no.2
• /
• pp.112-126
• /
• 1991

The atmospheric carbon dioxide concentration is ever-increasing and expected to reach about 600 ppmv some time during next century. Such an increase of $CO_2$ may cause a warming of the earth's surface of 1.5 to 4.5$^{\circ}C$, resulting in great changes in natural and agricultural ecosystems. The climatic scenario under doubled $CO_2$ projected by general circulation model of Goddard Institute for Space Studies(GISS) was adopted to evaluate the potential impact of climate change on agroclimatic resources, net primary productivity and rice productivity in Korea. The annual mean temperature was expected to rise by 3.5 to 4.$0^{\circ}C$ and the annual precipitation to vary by -5 to 20% as compared to current normal climate (1951 to 1980), resulting in the increase of possible duration of crop growth(days above 15$^{\circ}C$ in daily mean temperature) by 30 to 50 days and of effective accumulated temperature(EAT=∑Ti, Ti$\geq$1$0^{\circ}C$) by 1200 to 150$0^{\circ}C$. day which roughly corresponds to the shift of its isopleth northward by 300 to 400 km and by 600 to 700 m in altitude. The hydrological condition evaluated by radiative dryness index (RDI =Rn/ $\ell$P) is presumed to change slightly. The net primary productivity under the 2$\times$$CO_2$ climate was estimated to decrease by 3 to 4% when calculated without considering the photosynthesis stimulation due to $CO_2$ enrichment. Empirical crop-weather model was constructed for national rice yield prediction. The rice yields predicted by this model under 2 $\times$ $CO_2$ climatic scenario at the technological level of 1987 were lower by 34-43% than those under current normal climate. The parameters of MACROS, a dynamic simulation model from IRRI, were modified to simulate the growth and development of Korean rice cultivars under current and doubled $CO_2$ climatic condition. When simulated starting seedling emergence of May 10, the rice yield of Hwaseongbyeo(medium maturity) under 2 $\times$ $CO_2$ climate in Suwon showed 37% reduction compared to that under current normal climate. The yield reduction was ascribable mainly to the shortening of vegetative and ripening period due to accelerated development by higher temperature. Any simulated yields when shifted emergence date from April 10 to July 10 with Hwaseongbyeo (medium maturity) and Palgeum (late maturity) under 2 $\times$ $CO_2$ climate did not exceed the yield of Hwaseongbyeo simulated at seedling emergence on May 10 under current climate. The imaginary variety, having the same characteristics as those of Hwaseongbyeo except growth duration of 100 days from seedling emergence to heading, showed 4% increase in yield when simulated at seedling emergence on May 25 producing the highest yield. The simulation revealed that grain yields of rice increase to a greater extent under 2$\times$ $CO_2$-doubled condition than under current atmospheric $CO_2$ concentration as the plant type becomes more erect.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.15 no.2
• /
• pp.146-150
• /
• 1995

The yield performance and nutrient quality of barley for pellets making from whole crop material were discussed during 1993-1994. Barley (cv. Olbori) was grown on paddy land after rice cutivation and was harvested at early stage of physiological maturity. A column type of whole crop pellets was produced by 1.5cm diameter and 2.5cm height. Barley war evaluated as a suitable materials for whole crop pellet making. Barley produced higher yield and better qualitative roughage in the utilization of pellet making than in the silage making. Dry matter yields were obtained 12.02 MTha in pellet making and 11.70 MT/ha in silage making. Net energy value of barley pellet were 6.54 MJ in net energy lactation and 635 SV in starch equivalent net energy. Feeding of barley pellet improved milk production of daily cattle Daily milk yields per head were 25.1 liter in silage feeding and 25.9 liter in pellet feeding. Production cost of pellets and silages made from whole crop barley were 169.07 won/kg and 124.15 won/kg dry matter, respectively.

• Asian-Australasian Journal of Animal Sciences
• /
• v.9 no.4
• /
• pp.411-420
• /
• 1996

Asia Triple HIn this study an attempt was made to determine the cost of producing fodders at Savar Dairy Farm (SDF). For this purpose, all seasonal fodders, such as Maize, Jowar, Cowpea and Oat and all perennial fodders, such as Para and Napier were studied. The highest acreage of land was allocated to high-land Para (33.8%) and the lowest acreage (2.7%) was devoted to Cowpea. Jowar attained the highest yield (74.2 tons) per hectare and Maize attained the lowest yield (25.8 tons/h). The highest cost per hectare was attributed to Jowar (TK. 20944.18) while the lowest cost was attributed to low-land para (TK. 10349.86). The cost of production of fodder per kilogram was the highest (TK. 0.66) for Maize and the lowest for Oat (TK. 0.24). The cost of production of low-land Para was much lower than that of high land Para. The per kilogram cost of silage production was the highest (TK. 0.71) for Maize and the lowest (TK. 0.31) was for Napier. The gross return analysis further showed that the highest net margin and B:C ratio were observed for Napier followed by Low-land Para, Jowar, Oat, Cowpea, High-land Para and Maize. Therefore, those fodders whose B:C ratios and yield/ha were higher should be allocated more area of land to stimulate increased returns to SDF in the future is suggested.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 1995.10a
• /
• pp.66-67
• /
• 1995

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.195-198
• /
• 1995

In Semi-Solid Forging, it is necessary to control the forming variables accurately in order to make near-net-shape products. Generally, the defects of products may occur due to liquid segregation which can be caused by the degree of deformation and condition of friction in Semi-Solid Forging, where the segregation is to be predicted by flow analysis. This paper presents the feasibility of theoretical analysis model using the new yield function which is proposed by Doraivelu et al. to the flow analysis of the semi-solid dendritic Sn-15%Pb alloys instead of adopting the yield criterion of Shima & Oyane which is used by Charreyron and usefulness of the adopted yield function. The distribution of the liquid fraction at various strains in radial direction and the influence of friction are estimated by Upper Bound Method.