• The Korean Journal of Pesticide Science
• /
• v.14 no.2
• /
• pp.133-137
• /
• 2010

A field investigation was carried out for two years to analyze yield loss due to soybean anthracnose caused by Colletotrichum truncatum and to determine its economic threshold limit. Anthracnose severity in terms of % diseased pods was negatively correlated with yield, number of normal seeds per plant and number of pods per plant, and positively correlated with % abnormal seeds with correlation coefficients of -0.85, -0.78, -0.64, and 0.80, respectively. A simple linear regression model was obtained as Y=-1.7781X+164.22 with $R^2$=0.8092, when the soybean yields (Y) were predicted using anthracnose severity (X) as an independent variable. The yield levels could be predicted as high as 80.92%. Based on this equation, spray threshold without economic considerations was estimated as 6.9 in % pods infected with anthracnose. Economic threshold limit and economic spray threshold able to compensate the costs of fungicide sprays were determined as 11.9% and 9.5%, respectively.

• Microbiology and Biotechnology Letters
• /
• v.48 no.3
• /
• pp.267-275
• /
• 2020

Anthocyanins are antioxidant compounds susceptible to environmental factors. Anthocyanin encapsulation into yeast cells is a viable solution to overcome this problem. In this study, the optimal factors for anthocyanin encapsulation were investigated, including anthocyanin concentration, plasmolysis contraction agent, and ethanol concentration, and response surface methodology was evaluated, for the first time. Anthocyanin from Hibiscus sabdariffa L. flowers was encapsulated into Saccharomyces cerevisiae using plasmolysis contraction agent (B: 3%-20% w/v), ethanol concentration (C: 3%-20% v/v), and anthocyanin concentration (A: 0.15-0.45 g/ml). The encapsulation yield and anthocyanin loss rate were determined using a spectrometer (520 nm), and color stability evaluation of the capsules was performed at 80℃ for 30 min. The results of the study showed that these factors have a significant impact on the encapsulation of anthocyanin, in which ethanol agents have the highest encapsulation yield compared to other factors in the study. Statistical analysis shows that the independent variables (A, B, C), their squares (A², B², C²), and the interaction between B and C have a significant effect on the encapsulation yield. The optimized factors were anthocyanin, 0.25 g/ml; NaCl, 9.5% (w/v); and ethanol, 11% (v/v) with an encapsulation yield of 36.56% ± 0.55% and anthocyanin loss rate of 15.15% ± 0.98%; This is consistent with the expected encapsulation yield of 35.46% and loss rate of 13.2%.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.34 no.1
• /
• pp.14-22
• /
• 1989

Rice varieties showing different degree of resistance were compared with their yield losses due to the damage of sheath blight disease in field condition through 1985 to 1986. Gayabyeo showed the lowest value of disease severity among 5 varieties tested in 1985 and 8 in 1986. and Taebaekbyeo, Kwanakbyeo and Labelle showed higher value of disease severity under the condition of artificial or natural disease inoculation. Grain yield of Gayabyeo, a moderate resistant rice variety, was reduced by 0.3 to 5％ in the rate due to sheath blight disease damage and Taebaekbyeo. a susceptible variety. showed the highest in the rate of yield loss, 6.8 to 25.8 ％. The matured grain rate and 1000-grain weight of the matured tiller were decreased when the developing disease lesion reached to the flag leaf, and then panicle weight was decreased more than 25 ％ compared with panicle of healthy culm. In conclusion, Gayabyeo showed the lower rate of yield loss because of slow development of disease to the upper leaves after initial disease occurence on the lower parts of rice plants.

• Asian-Australasian Journal of Animal Sciences
• /
• v.6 no.3
• /
• pp.423-426
• /
• 1993

A total 930 outbreaks of Foot and Mouth Disease (FMD) were recorded in Bangladesh from 1988 to 1991. Number of FMD outbreaks was recorded highest in Rajshahi division (304) followed by Dhaka (272), Khulna (203) and Chittagong (151). During 1988 to 1991, FMD outbreaks reached in peak level in 1990 (540) followed by 1989 (209), 1988 (95) and 1991 (86). Outbreaks though occurred throughout the year were higher in premonsoon and winter seasons. Morbidity rate was found significantly higher (p<0.01) in cattle (35.5%) than buffaloes (23.3%) and sheep/goats (4.8%). Of the cattle, bull/bullock infected more (p<0.01) than cows and calves. Morbidity rate in different animals was observed significantly higher (p<0.01) in Rajshahi and Dhaka divisions than in Khulna and Chittagong. Mortality specially in calves was found at the rate of 50.9%. Loss in milk yield was found to be 66.6%. Disease period for a FMD affected cattle varied from 16 to 26 days (average 22.7 days). Loss of working days per working cattle ranged from 14 to 24 days (average 21.2 days) and the loss in draft energy per cattle was found to be 12.7 to 18.9 KW hour.

• Journal of the Korean Wood Science and Technology
• /
• v.10 no.2
• /
• pp.22-27
• /
• 1982

This experiment was carried out to evaluate the results of fire retardancy of sealer coated plywood by Building material combustibility tester and Inclined panel tester. At this study, weight loss percentage, flame exhausted time, burning point and smoke yield coefficient were examined. The findings of this study lead to conclusions as listed below. 1. It was obvious that weight loss percentage and flame exhausted time of Inclined panel tester had more remarkable tendency than those of Building material combustibility tester. 2. Burning point was determined by Inclined panel tester while smoke yield coefficient by Building material combustibility tester. 3. Weight loss percentage decreased remarkably with proportion to the increase of sealer coated amount during 5 minutes burning. 4. Flame exhausted time decreased with proportion to the increase of sealer coated amount during 3 minutes burning. 5. Burning point indicated increasing tendency with proportion to the increase of sealer coated amount. 6. Smoke yield coefficient of urea scaler showed definite inclination decreasing with the increase of sealer coated amount.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2005.10a
• /
• pp.632-636
• /
• 2005

Accelerated soil erosion is a worldwide problem because of its economic and environmental impacts. To effectively estimate soil erosion and to establish soil erosion management plans, many computer models have been developed and used. The Revised Universal Soil Loss Equation (RUSLE) has been used in many countries, and input parameter data for RUSLE have been well established over the years. However, the RUSLE cannot be used to estimate the sediment yield for a watershed. Thus, the GIS-based Sediment Assessment Tool for Effective Erosion Control (SATEEC) was developed to estimate soil loss and sediment yield for any location within a watershed using the RUSLE and a spatially distributed sediment delivery ratio. SATEEC was enhanced in this study by developing new modules to:1) simulate the effects of sediment retention basins on the receiving water bodies, 2) prepare input parameters for the Web-based sediment decision support system using a GIS interface. This easy-to-operate SATEEC system can be used to identify areas vulnerable to soil loss and to develop efficient soil erosion management plans.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.7
• /
• pp.1725-1728
• /
• 2009

This research developed process control device and FGV pattern generating device essential for full gate visual inspection to improve process so that defect detection capability may be maximized in specified environment. The devices developed in this research, which can be swiftly replaced in case loss or error occurs, are anticipated to improve module yield as well as maintain tact loss near '0'. In addition, as a result of mounting H/W and S/W system to control detailed operation sequence in production line and executing performance check and verification, detection rates were 98.1% and 99.1% respectively for pixel defect by tact and line defect, and yield of the entire module process including gate and visual level test increased up to 98.3%.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.44 no.4
• /
• pp.8-15
• /
• 2012

Optical property improvements for ONP (old newspaper) and OMG (old magazine) were attempted by application of in-situ $CaCO_3$ formation process on recycled fiber surfaces. Washing treatment of ONP and OMG resulted in 35~40% yield loss for around 6% brightness improvement. Washing plus bleaching process with $H_2O_2$ and FAS (formamidine sulfinic acid) improved brightness and ERIC values a little more with the same amount of yield loss as washing treatment. In-situ $CaCO_3$ formation method improved those optical properties much better than the washing plus bleaching method without loss of yield, and better than the case of adding high brightness PCC up to the same ash level. It can be said that the in-situ $CaCO_3$ formation method may be used as an effective alternative for upgrading optical properties of recycled fibers.

• Journal of Auto-vehicle Safety Association
• /
• v.7 no.3
• /
• pp.19-24
• /
• 2015

Brake pads are a component of disc brake system of automobile and consist of steel backing plates and friction material facing the disk brake rotor. Due to the repeated sliding forces and torque in vehicle braking, friction performance of brake pads are ensured. Futhermore, the brake pad is one of major tuning components in aftermarket, mechanical characteristics of the brake pad are necessary to evaluate for establishing the certification standards of tuning components. This study had performed the five specimen tests for friction coefficients and wear loss rates according to the SAE test specification. Using the instrumented indentation method, yield strength and tensile strength were measured. Friction coefficients, 0.386 - 0.489, and wear loss rates, 1.0% - 3.7% are obtained. The range of yield strength and tensile strength are 21.4 MPa - 105.3 MPa and 39.5 MPa - 176.4 MPa respectively.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1493-1495
• /
• 1997

Cropping of head and tail ends of rod in wire Rolling Process is required to aviod roll damage, and prevent cobbles. In order to reduce the crop loss, the new crop control system for rotary shear of Wire rolling Process has been developed. Performance shows the developed system cut precisely within setting length. As a result, it is expected to increase the yield ratio of products about 0.2 percent and stabilize the operantional condition.