• Proceedings of the KSME Conference
• /
• 2001.11b
• /
• pp.65-70
• /
• 2001

OH radical and NOx have been measured in a methane-air partially premixed flame using PLIF technique to define preheated air combustion characteristics. The temperature of mixture is determined by 300K, 400K, 600K and 800K below the auto-ignition temperature respectively. Flame height increases as equivalence ratio increased. As initial enthalpy is supplied, the radius of flame was increased and much amount of yellow flame in rich equivalence ratio was observed. This is due to the faster burning velocity. Also initial oxidization begins earlier as the initial temperature of mixture increased. It means that height of premixed flame front decreased. This phenomenon can be observed OH PLIF image. The qualitative analysis of OH concentration in the PLIF image shows that overall OH concentration increases with equivalence ratio and the initial temperature of mixture increased. At the preheating temperature goes up, axial gradient of OH concentration is less steep than that of lower temperature condition. This may identify that combustion reacts continuously, so preheated air combustion can evade the local heating and make high temperature indiscriminately in the overall reaction zone.

• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.11
• /
• pp.1638-1644
• /
• 2001

The objective of this research was to evaluate alternative treatments for the best extraction condition for collagen from chicken feet. Various properties such as chemical composition, amino acid, pH, swelling percentage, yield and pure collagen, collagen loss, color (Hunter L, a and b) and electrophoresis of collagen from chicken feet treated by 5% acids (acetic acid, citric acid. hydrochloric acid and lactic acid) and soaking times (12, 24, 36 and 48 h) were evaluated. The crude protein, fat, ash and moisture contents of chicken feet was 17.42, 12.04, 5.98 and 62.05%, respectively. Amino acid composition of collagen from chicken feet indicated that the protein of collagen was markedly hydrolized by the hydrochloric acid treatment. The result of electrophoresis also supported this phenomenon. Both the swelling percentage of lactic acid and citric acid treatments were significantly higher than that of acetic acid and HC1 treatment. The pH of the acid treatments ranged from 2.43-3.62. According to the result of yield, pure collagen and loss of collagen, the best condition of extracting collagen from chicken feet was soaked in 5% lactic acid for 36 h. However, a brighter yellow color of collagen from all treatments was observed with a longer soaking time.

• Journal of the Society of Naval Architects of Korea
• /
• v.47 no.2
• /
• pp.188-195
• /
• 2010

Green water load is an important parameter to be considered in designing a modern ship or offshore structures like FPSO and FSRU. In this research, a numerical simulation method for green water phenomenon is introduced. The Navier-Stokes equations and the continuity equation are used as governing equations. The equations are calculated using Finite Difference Method(FDM) in rectangular staggered grid system. To increase the numerical accuracy near the body, the Cartesian cut cell method is employed. The nonlinear free-surface during green water incident is defined by Marker-density method. The green waters on a box in regular waves are simulated. The simulation results are compared with other experimental and computational results for verification. To check the applicability to moving ship, the green water of the ship which is towed by uniform force in regular wave, is simulated. The ship is set free to heave and to surge.

• Korean Journal of Materials Research
• /
• v.12 no.5
• /
• pp.347-352
• /
• 2002

A transparent dielectric of the $PbO-B_2O_3-SiO_2-A1_2O_3$ system which was a low melting glass has been used for PDP (Plasma Display Panel), but it has a problem which is a reaction to be occurred between a transparent dielectric layer and electrodes (Ag, ITO) after firing. This research was conducted for ion migration of $Ag^+\$ and $Sn^ {2+}$ during firing three different frits of low melting glass. The result showed that yellowing phenomena occurred through a chemical reaction between $Ag^+\$and $Sn^ {2+}$ at 550~58$0^{\circ}C$ for 20~60 min. In addition, it was confirmed that the migration of $Sn^{2+}$ from ITO electrode made a strong effect on the yellowing phenomena.

• Journal of the Korean Applied Science and Technology
• /
• v.27 no.3
• /
• pp.266-272
• /
• 2010

Natural Ginger extract was extracted from Ginger component using ethanol as a solvent, and we tested various pharmaceutical characteristics in this extract. Characteristics experiment to use natural Ginger extract tested antimicrobial experiment using microbe, and analyzed organic and inorganic component with analysis instrument. From the result of characteristics experiment, some conclusions are obtained as follow. In this experiment, natural Ginger extract was obtained about 22.50 g-Ginger extract(extraction ratio : 1.80%) as liquid state of some viscous yellow-brown color. The result of antimicrobial experiment with staphylococcus aureus and aspergillus niger in microbe decreased more and more according to passage of reaction time. This phenomenon could know that Ginger extract has influenced to antimicrobial effect. In the result of instrumental analysis, aromatic organic components of benzimidazole(1.283), propyl isothiocyanate or isothiocyanic acid(1.477) etcs from Ginger extract were detected with GC/MS and inorganic component of Ca(27.6 ppm), K(24.08 ppm), Mg(6.03 ppm), Na(1.02 ppm), Zn(1.02 ppm), Sb(0.711 ppm) and Li(0.079 ppm) etcs from Ginger extract were detected with ICP/OES.

• Journal of Ginseng Research
• /
• v.30 no.2
• /
• pp.64-69
• /
• 2006

Gap junctional channels, allowing rapid intercellular communication and synchronization of coupled cell activities, play crucial roles in many signaling processes, including a variety of cell activities. Consequently, a modulation of the gap junctional intercellular communication (GJIC) should be a potential pharmacological target. In the present, the GJIC of a epithelial-derived rat mammary cells (BICR-M1Rk) was assessed in the presence of ginseng saponin, by using an established method of scrape-loading dye transfer assay. The transfer of Lucifer yellow (diameter: 1.2 nm) among the neighboring BICR-M1Rk cells, in which connexin43 (Cx43) is a major gap junction channel-forming protein, was significantly retarded at a concentration of $10{\mu}g/ml$ ginseng saponin. By using both methods of RT-PCR and Western blotting, it was demonstrated that ginseng saponin modulated neither the mRNA synthesis of Cx43 nor the translational process of Cx43. This ginseng saponin-induced modification of GJIC was a similar phenomenon observed under the $\beta$-glycyrrhetinic acid treatment, a well-known gap junction channel blocker. Taken together, it is reasonable to conclude that the ginseng saponin inhibits GJIC only by modulating the gating property of gap junction channels.

• Korean Journal of Materials Research
• /
• v.31 no.1
• /
• pp.23-28
• /
• 2021

The purpose of this study is to prepare WO3 nanopowders by high-energy milling in mixture gas (7 % H2+Ar) with various milling times (10, 30, and 60 min). The phase transformation, particle size and light absorption properties of WO3 nanopowders during reduction via high-energy milling are studied. It is found that the particle size of the WO3 decreases from about 30 ㎛ to 20 nm, and the grain size of WO3 decreases rapidly with increasing milling time. Furthermore, the surface of the particles due to the pulverization process is observed to change to an amorphous structure. UV/Vis spectrophotometry shows that WO3 powder with increasing milling times (10, 30, 60 min) effectively extends the light absorption properties to the visible region. WO3 powder changes from yellow to gray and can be seen as a phenomenon in which the progress of the color changes to blue. The characterization of WO3 is performed by high resolution X-ray diffractometry, Field emission scanning electron microscopy, Transmission electron microscopy, UV/Vis spectrophotometry and Particle size analysis.

• Textile Coloration and Finishing
• /
• v.32 no.4
• /
• pp.185-192
• /
• 2020

A novel binding site for metal ion made by designing molecule with tetrazolo quinoline with hydrazine carboxamide (TQC) and the designed molecule successfully synthesized. The probe works by selectively detecting Al3+ ion via both fluorimetric and colorimetric approach. The probe's effectiveness towards aluminium ion detection is highly sensitive and selective with no substantial interference with other competing ions. The added Al3+ ion to TQC fetched a rapid change of visual color to yellow from colorless, also the response of fluorescence turn-on. The fluorescence turn-on and color change visibly by the probe TQC with Al3+ ion credited to the ICT phenomenon (intramolecular charge-transfer transition). The likely interaction of the probe with aluminium ion has also been there predicted from ESI-MS spectral analysis results. The usefulness of the probe confirmed by practical utility by making a test kit to monitor Al3+ ion in water which showed a naked eye detection by notable color change.

• Journal of the Korean Vacuum Society
• /
• v.16 no.1
• /
• pp.27-32
• /
• 2007

We have investigated photoluminescence(PL) spectra of four $In_xGa_{1-x}N(x=0.15)/GaN$ multiple quantum well(MQW) structures with different well widths in order to study a phenomenon on crystal phase separation. The asymmetic behavior of PL spectra becomes stronger with increase of the well width from 1.5 nm to 6.0 nm, which indicates dual-peak nature. Analyzing the dual-peak fit PL spectra, we have observed that the intensity of low-energy shoulder peak rapidly becomes stronger, compared to that of high-energy peak corresponding to a transition in InGaN QW. It suggests that InGaN QW has two phases with tiny different In compositions, and that In-rich(InN-like) phase forms more and more relatively than stoichiometric InGaN(x=0.15) phase by the InN phase separation mechanism as the QW width increases. PL spectrum of 6.0-nm sample shows an additional peak at low-energy lesion(${\sim}2.0\;eV$) whose energy position is almost the same as a defect band of yellow luminescence frequently observed in GaN epilayers. It may be due to a defect resulted from In deficiency formed with development of the phase separation.

• Journal of Korean Society for Atmospheric Environment
• /
• v.20 no.4
• /
• pp.555-569
• /
• 2004

Size -segregated measurements of aerosol composition using 8-stage DRUM impactor are used to determine the transport of natural and anthropogenic aerosols at Gosan site from 29 March to 30 May in 2002. Separation of ambient aerosols by DRUM impactor offers many Advantages over other standard filtration techniques. Some of the most important advantages are the ability to segregate into details by particle tire, to better preserve chemical integrity since the air stream doesn＇t pars through the deposit, to collect samples as a function of time, and to have a wide variety of impaction surfaces available to match analytical needs. Although the transport of Yellow sand is a well-known phenomenon in springtime, the result of measurement shows that not only soil dust but also anthropogenic aerosols, including sulfur, enriched trace metals such as Pb, Ni, Zn. Cu, Cr, As, Se, Br, are transported to Gosan in springtime. This study combines the size- and time-resolved aerosol composition measurements with isentropic, backward air-mass trajectories in order to identify some potential source regions of anthropogenic aerosols. As a result, during the NYS period, the average concentration of PM$_{10}$ was 46$\mu\textrm{g}$/㎥, Si, Al. S, Fe, Cl, K, Ca were higher than 1,000 ng/㎥ and Ti was about 100 ng/㎥. The concentrations of Zn, Mn, Cu. Pb, Br, Rb, V, Cr, Ni. At, Se ranged between 1 and 70 ng/㎥. More than 50% typical soil elements, tuck as Al, Si, Fe, Cd. Ti, Cr, Cu, Br. were distributed in a coarse particle range(5.0-12${\mu}{\textrm}{m}$). In other hand, anthropogenic pollutants, luck as S, N, Vi, were mainly distributed in a fine particle range (0.09-0.56${\mu}{\textrm}{m}$). During the YS period, PM$_{10}$ increased about 8 times than NYS period, and main soil elements, such as Al, Si, S, K, V, Mn, Fe also doubled in coarse particle range (1.15-12${\mu}{\textrm}{m}$). But Zn, As, Pb, Cu and Se, which distributed in the time aerosols (0.09-0.56${\mu}{\textrm}{m}$), were on the same level with or decreased than NYS period. Finally. except the YS Period, coarse particles (2.5-12${\mu}{\textrm}{m}$) are inferred to be influenced by soil, coal combustion, waste incineration, ferrous and nonferrous sources through similar pathways with Yellow Sand. But fine particles have different sources, such as coal combustion, gasoline vehicle, biomass burning, oil or coal combustion, nonferrous and ferrous metal sources, which are transported from China, Korea peninsula and local sources.ces.