• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.1B
• /
• pp.52-63
• /
• 2004

Packet loss process of cdma2000 mobile Internet channel deployed in Korea is modeled as a two state Markov process known as Gilbert model. This paper proposes the procedures to derive four parameters of the our modified Gilbert model from packet loss trace taken from two major cdma2000 networks in Korea. These four parameters are derived in various situations, that is, with fixed and moving terminals, in open field and urban areas. They can be used to produce synthetic packet loss patterns for study of the channel. Moreover, if they are calculated on-line during multimedia service, they can be used to make loss protection controls adaptive to network condition.

• Korean Journal of Materials Research
• /
• v.31 no.10
• /
• pp.582-585
• /
• 2021

Y₂O₃:Eu_x (x = 0.005, 0.01, 0.02, 0.03, 0.05, 0.1 mol) phosphors are synthesized with different concentrations of Eu³⁺ ions by solvothermal method. The crystal structure, surface and optical properties of the Eu doped Y₂O₃ phosphors are investigated using X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), and photoluminescence (PL) and photoluminescence excitation (PLE) analyses. From X-ray diffraction (XRD) results, the crystal structure of the Eu doped Y₂O₃ phosphor is found to be cubic. The maximum emission spectra of the Eu doped Y₂O₃ phosphors are observed at 0.05 mol Eu³⁺ concentration. The photoluminescence of 615 nm in the Eu doped Y₂O₃ phosphors is associated with ⁵D₀ → ⁷F₂ transition of Eu³⁺ ions. The decrease in emission intensity of 0.1 mol Eu doped Y₂O₃ is interpreted by concentration quenching. The International Commission on Illumination (CIE) coordinates of 0.05 mol Eu doped Y₂O₃ phosphor are X = 0.6547, Y = 0.3374.

• Korean Journal of Materials Research
• /
• v.4 no.6
• /
• pp.715-722
• /
• 1994

Thermochromic $Vo_{2}$ thin films for "smart windows" were prepared by electron beam evaporationmethod on a glass substrate and spectral transmittances were examined by spectrophotometer. Substratetemperature of $300^{\circ}C$ and annealing temperature of $400^{\circ}C$ were found to be effective to give athermochromism on $Vo_{2}$ thin film due to the crystallization of the thin film. Furthermore, annealing of$Vo_{2}$ thin film affected the spectral transmittance and reduced the transmittance significantly at wavelengthbelow 500nm.$V_{0.95}W_{0.05}O_{2}$ thin film doped by 5 atomic percent of W showed semiconductor-metal transition around 0$0^{\circ}V_{0.995}W_{0.005}O_{2}$thin film which contains 0.5 atomic percent Sn showed therrnochrornisrn when it was depositedat substrate temperature of $300^{\circ}C$ and annealed at $450^{\circ}C$ for 5 hours in argon gas. The transitiontemperature of the $V_{0.995}W_{0.005}O_{2}$ thin film was found to be about $25^{\circ}C$ and showed some hysterisis. and showed some hysterisis.

• East Asian mathematical journal
• /
• v.37 no.1
• /
• pp.41-77
• /
• 2021

Let M be a semi-invariant submanifold of codimension 3 with almost contact metric structure (��, ξ, η, g) in a complex space form Mn+1(c), c ≠ 0. We denote by Rξ = R(·, ξ)ξ and A(i) be Jacobi operator with respect to the structure vector field ξ and be the second fundamental form in the direction of the unit normal C(i), respectively. Suppose that the third fundamental form t satisfies dt(X, Y ) = 2��g(��X, Y ) for certain scalar ��(≠ 2c)and any vector fields X and Y and at the same time Rξ is ��∇ξξ-parallel, then M is a Hopf hypersurface in Mn(c) provided that it satisfies RξA(1) = A(1)Rξ, RξA(2) = A(2)Rξ and ${\bar{r}}-2(n-1)c{\leq}0$, where ${\bar{r}}$ denotes the scalar curvature of M.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1997.10a
• /
• pp.202-206
• /
• 1997

항공기 부품, 터빈형 임펠라나 브레이드, 자동차나 가전제품용의 대형금형류의 정밀가공과 생산성 향상에는 5축의 NC가공이 기존 3축의 NC 가공보다 많은 이점을 갖고 있다. 제1차 선도기술개발사업을 통해 C 형의 5축머시닝센터를 성공적으로 개발한 실적을 바탕으로 제2차 선도기술개발사업을 통해 작업이송거리 12,000*3,500*1,500(X*Y*Z), 위치정밀도 $\pm0.005mm/M$, 주축동력 30/45Kw의 대형, 강력, 정밀형의 문형5축머시닝센터 개불을 목표로 추진하고 있다.

• Journal of Korean Society for Atmospheric Environment
• /
• v.23 no.3
• /
• pp.277-285
• /
• 2007

Porous cordierite beads, of which the average pore size was $130{\mu}m$ and porosity was about 80%, were prepared by the foaming method and then their application as support of the $Pt/{\gamma}-alumina$ catalyst for $NO_x$, reduction with propene was investigated. The pressure drop of a 2 mm porous beads filter was less than that of a 1 mm porous beads filter and the difference in pressure drop between these two increased as the flow rate increased. The catalytic activity of $Pt/{\gamma}-alumina$ washcoated on the porous bead was tested with varying Pt loading $(0.005{\sim}0.1g/cm^3),\;C_3H_6/NO$ mole ratio $(0.5{\sim}8)$, space velocity $(20,000{\sim}30,000h^{-1})$ and oxygen contents (1 and 8). Pt loading of $0.04g/cm^3$ showed the highest activity for $NO_x$ conversion. The $De-NO_x$, test was operated in the temperature range of $200{\sim}400^{\circ}C$ and the best operation temperature of the catalytic filter is about $250^{\circ}C$. As the C/N ratio increased, increase of the $NO_x$, conversion might result from the increase in exhaustion of the amount of oxygen by the reduction of hydrocarbon. $NO_x$ conversion at $20,000h^{-1}$ of space velocity shows a maximum 34% higher conversion than that at $30,000h^{-1}$. On condition that $O_2$ was 5%, space velocity was $20,000h^{-1}$ and the C/N ratio was 8, the $NO_x$ conversion exhibited a maximum of 40% at $250^{\circ}C$.

• Journal of the Korean Magnetics Society
• /
• v.9 no.1
• /
• pp.1-6
• /
• 1999

The crystallographic and magnetic properties of the ferrimagnetic $CoFe_{1.9}Ga_{0.1}O_4$ have been studied by X-ray, M$\"{o}$ssbauer measurements. The crystal structure is found to be inverse spinel structure with the lattice constant $a_0=8.386{\pm}0.005{\AA}$. M$\"{o}$ssbauer spectra of $CoFe_{1.9}Ga_{0.1}O_4$ have been taken at various temperatures ranging from 13 to 840 K. The isomer shifts indicate that the valence states of the Fe ions for tetrahedral (A) and octahedral (B) sites have ferric character. Debye temperatures for the A and B sites are found to be 882$\pm$5 K and 209$\pm$5 K, respectively. Atomic migration form the A to the B sites starts near 350 K and increases rapidly with increasing temperature to such a degree that 73% of the ferric ions at the A sites have moved over to the B sites by 700 K. by 700 K.

• Journal of Magnetics
• /
• v.18 no.1
• /
• pp.5-8
• /
• 2013

The perpendicular magnetic anisotropy of sputtered CoFeB thin films covered by MgO was investigated by vibrating sample magnetometry. Three different $Co_xFe_{80-x}B_{20}$ alloys were studied. Under out-of plane magnetic field, the saturation field was found to increase with increasing the Co content. The magnetization and interface anisotropy energy were obtained for all samples. Both showed a marked dependence on the MgO overlayer thickness. In addition, their variations were found to be non-monotonous as a function of the Co concentration.

• Proceedings of the KIEE Conference
• /
• 1993.07b
• /
• pp.1116-1118
• /
• 1993

$({Ba}_{1-x}La_x)TiO_3,\;x=0{\sim}0.005$ specimens were fabricated by solid stste reaction method, and their PTC characteristics were examined. The gain growth is inhibited by La substitution, and it is confirmed that the specimens are crystallized at $900^{\circ}C$ from DTA analysis. The 0.003mol La substituded specimens show lowest resistivity and best PTC effects. Furthermore, the electrode sintered-specimens exhibite better PTC effects than no sintered-specimens.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.2
• /
• pp.184-189
• /
• 2004

The effects of $Y_2$ $O_3$-substitution on the piezoelectric properties of Pb[(N $i_{1}$3/N $b_{2}$3/)$_{0.15}$(Z $r_{1}$2/ $Ti_{1}$2/)$_{0.85}$] $O_3$ceramics were investigated. It was found that $Y^{3+}$ ions incorporate into Pb-sites of the ceramics, resulting in a increased lattice anisotropy and formation of Pb-vacancies. As a result, an orthorhombic-tetragonal phase transition was induced when $\chi$>0.005. At the morphotropic phase boundary of x=0.005, piezoelectric constants( $k_{p}$, $k_{33}$, and $d_{33}$) showed maximum values of 0.53, 0.58, and 350pC/N, respectively. A 30-layer actuator fabricated with the above material showed a maximum strain of 0.12％ under 100V DC bias.