• The Journal of the Korea Contents Association
• /
• v.14 no.8
• /
• pp.233-242
• /
• 2014

The purpose of this study is to compare the reduction of the dose radioactivity by CARE kV with that of the Bismuth shielding. First, CT was performed with transparent materials, including a Bismuth shielder which is a well-known material for decreasing the dose of radiation. Moreover, we have estimated and compared the affects of the reduction of dose on eye lens, thyroid, breast and genitals. These steps aim to compare reactions with and without the application of the Rando phantom with PLD as well as with CARE kV or not. As a result, during the Brain angio scan, the dose of CARE kV set inspection test methods showed the least dose. Depending on whether we use CARE kV, which showed the effect of dose reduction by 63%. During the Carotid angio scan, the dose was increased by 13% by how to set CARE kV+Bismuth. During the Cardiac angio scan, which showed the effect of dose reduction by 31% by how to set CARE kV+Bismuth. During the Lower extremity angio scan, the dose was measured least by how to set up the whole Bismuth. Compared with CARE kV set of test methods, which showed the effect of dose reduction by 9%.

• The Journal of the Korea Contents Association
• /
• v.14 no.6
• /
• pp.247-254
• /
• 2014

For the purpose of early diagnosis of the breast cancer, the attention on the screening mammography has been increasing-with supply of digital mammography day by day. Image quality is decided by target materials and filter combinations. Optimized selection by a glandular density and a thickness is needed, because these combinations change x-ray spectrum and effect to image quality. The purpose of this study is to find out optimized target and filter combinations through the evaluation of quantitative image quality and to suggest means which minimize patient dose through MCNPX. In results, spatial frequency resolution evaluation which is quantitative image quality evaluation method, MTF, NPS, DQE shows that we have to select Mo/Mo combinations or Mo/Rh combinations when compressed breast is thin. but in case of that when compressed breast is thick, we have to select Rh/Rh combinations or W /Rh combinations. In a comprehensive evaluation, W!Rh combinations which are not used in thin breasts in practice was superior to all image quality evaluation. This result is somewhat different-with clinical examination results. Secondary end point was organ dose evaluation, radiation dose of opposite breast was approximately 47 ~73% effectiveness when selecting standard breast. In conculsion, the most important point is that we have to select the optimal combinations-with considering dose evaluation and various thickness.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.17 no.1
• /
• pp.60-72
• /
• 1995

Temporomandibular joint ankylosis is the movemental obstacle of mandible which depend on proliferation of bony or fibrous tissue in temporomandibular joint structure by various causes. In order to treat this, various surgical methods have been performed, but no operative methods have been produced consistently successful results. This research has been performed to the patients who had been operated due to temporomandibular joint ankylosis by studying classification, cause, onset, duration, anesthesia and treatment method, symptom, change of mouth opening, complication through medical record, X-ray, follow-up for being a help to proper selection of treatment method and evaluation of prognosis. The author obtained the following results by analyzing 44 cases among patients who had been operated due to temporomandibular joint ankylosis during 8 year hospitalization from 1986 to 1993 in Dept. of Oral & Maxillofacial Surgery of Seoul National University Hospital. 1. The occurrence was in the order of below 10, 20's, 10's, 30's. The average of occurrence was 12.95. Illness period was 50.0% within 10 years and 50% beyond 10 years. The average period of illness was 13.33 years. 2. Trauma occupied 54.5% of causes and inflammation occupied 45.5%. Men had more occurrences due to trauma and there was no difference in case of inflammation. 3. In nasotracheal intubations for general anesthesia, the cases of using fiberoptic laryngoscope occupied 40.9%, direct or blind nasotracheal intubation occupied 40.9% and the cases of using tracheostomy occupied 18.2%. 4. In operative approaching methods, submandibular & preauricular approach were mainly applied, and in operative methods, high condylectomy(Group I) occupied 11.4%, arthroplasty without interpositional material following condylectomy or gap ostectomy(Group II) occupied 11.4%, with interpositional material following high condylectomy (Group III) occupied 40.9%, and using condylar reconstruction following condylectomy or gap ostectomy(Group IV) occupied 36.6%. 5. In change of mouth opening reformed after surgery, Group III showed the best result of average 23.5mm, Group IV showed 16.3mm, Group I showed 14.9mm and Group II showed 10.2mm of reformation. Summarizing the results as written above, it is considered that early treatment is important as soon as possible in Temporomandibular joint ankylosis. It is recommended in surgical method what can lead to postoperative early movement maintaining anatomaical & functional form, and then the development of various surgical methods will be requested.

• Journal of Korean Society of Forest Science
• /
• v.101 no.2
• /
• pp.291-296
• /
• 2012

Triploids are a useful tool for biomass production and molecular breeding of trees with a long life span. Triploids of the poplar 'Hyunsasi' (Populus alba ${\times}$ P. glandulosa) have been developed by crossing between female diploids and a male tetraploid. The tetraploid was developed around the 1970s at Korea Forest Research Institute by colchicine-induced chromosome doubling. Seedlings of the $F_1$ generation were analyzed using flow cytometry to verify their ploidy status. The mean relative fluorescence index of 3 F1 poplars, labeled as Line- 1, Line-17, Line-18, were approximately 1.5 times higher than those of diploid poplars, and the results clearly indicated that they were triploids. The phenotype of the F1 poplars included larger leaves and thicker stem than diploids, and abnormal leaf morphology, especially in the triploid 'Line-18'. Three triploid lines developed roots more slowly and had less roots than diploid. However, 3 poplar cytotypes (2x, Line-1, Line-17) rooted within 10 days on MS medium. In contrast, compared with the 3 cytotypes, the Line-18 showed about 80% and 70% in the rooting rate and the number of roots. The triploid poplars could be directly utilized for biomass production and with their sterility, they could serve as basic material for genetic transformation. In addition, flow cytometric analysis proved to be an effective and reliable method for screening forest trees for their ploidy level.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.6
• /
• pp.151-160
• /
• 2003

The stability of the designed rock slope is analysed based on two kinds of shear strength model. Besides the deterministic analysis, a probabilistic approach on Monte Carlo simulation is proposed to deal with the uncertain characteristics of the discontinuity and the results obtained from two models are compared to each other. To carry out the research of characteristics of the discontinuity, BIPS, DOM Scanline survey data and direct shear test data are used, and chi-square test is used for determining the probability distribution function. The rock slope is evaluated to be stable in the deterministic analysis, but in the probabilistic analysis, the probability of failure is more than 5%, so, it is considered that the rock slope is unstable. In the shear strength models, the probability of the failure based on the Mohr-Coulomb model(linear model) is higher than that of the Barton model. It is supported by the fact that the Mohr-Coulomb model is more sensitive to block size than the Barton model. In fact, there is no reliable way to estimate the unit cohesion of the Mohr-Coulomb model except f3r back analysis and in the case of small block failure in the slope, Mohr-Coulomb model may excessively evaluate the factor of the safety. So, the Barton model of which parameters are easily acquired using the geological survey is more reasonable for the stability of the studied slope. Also, the selection of the proper shear strength model is an important factor for slope failure analysis.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.12
• /
• pp.6121-6128
• /
• 2012

Radiation-induced side effects on normal tissue are determined largely by the capacity of cells to repair radiation-induced DNA damage. X-ray repair cross-complementing group 1 (XRCC1) plays an important role in the repair of DNA single-strand breaks. Studies have shown conflicting results regarding the association between XRCC1 gene polymorphisms (Arg399Gln, Arg194Trp, -77T>C and Arg280His) and radiation-induced side effects in patients undergoing whole breast radiotherapy. Therefore, we conducted a meta-analysis to determine the predictive value of XRCC1 gene polymorphisms in this regard. Analysis of the 11 eligible studies comprising 2,199 cases showed that carriers of the XRCC1 399 Gln allele had a higher risk of radiation-induced toxicity than those with the 399 ArgArg genotype in studies based on high-quality genotyping methods [Gln vs. ArgArg: OR, 1.85; 95% CI, 1.20-2.86] or in studies with mixed treatment regimens of radiotherapy alone and in combination with chemotherapy [Gln vs. ArgArg: OR, 1.60; 95% CI, 1.09-2.23]. The XRCC1 Arg399Gln variant allele was associated with mixed acute and late adverse reactions when studies on late toxicity only were excluded [Gln allele vs. Arg allele: OR, 1.22; 95% CI, 1.00-1.49]. In contrast, the XRCC1 Arg280His variant allele was protective against radiation-induced toxicity in studies including patients treated by radiotherapy alone [His allele vs. Arg allele: OR, 0.58; 95% CI, 0.35-0.96]. Our results suggest that XRCC1 399Gln and XRCC1 280Arg may be independent predictors of radiation-induced toxicity in post-surgical breast cancer patients, and the selection of genotyping method is an important factor in determining risk factors. No evidence for any predictive value of XRCC1 Arg194Trp and XRCC1 -77T>C was found. So, larger and well-designed studies might be required to further evaluate the predictive value of XRCC1 gene variation on radiation-induced side effects in patients undergoing whole breast radiotherapy.

• Korean journal of applied entomology
• /
• v.51 no.2
• /
• pp.141-148
• /
• 2012

An outbreak of Ricania sp. occurred in the Kurye, Jeonnam area in 2011. This outbreak damaged many kinds of fruit trees such as Cornus, Persimmon and Chestnut. This experiment was conducted to survey the occurrence ecology of Ricania sp. such as host plants, oviposition characters, morphological characters and life cycle, as well as to select environmental friendly control agents. Ricaina sp. host plants included 51 species such as 32 xylophytes, and 19 herbaceous plants. Ricaina sp. preferred Cornus officinalis, Diospyros kaki, Castanea crenata, Eucommia ulmoides, Styrax japonicus for oviposition. Adults laid eggs on new inner twigs with 28.8 eggs per egg-mass. Egg size was 1.24 mm(length), 0.55 mm(width) in an oval shape. Nymphs molted four times. Every nymph stage had an x shape of yellow or white beeswax around the anus. Overwintered eggs of Ricania sp. hatched from the mid May to early June. Nymphal periods were from mid May to mid August and adults appeared from mid July but spawning began in mid August. Ricania sp. damaged new twigs by oviposition and retarded growth by sucking nutrients and producing a sooty mold. Sophora and natural plant extracts were effective environmentally friendly agricultural materials used to control the nymph and adult Ricania sp. Mortality was > 80%.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05b
• /
• pp.233-240
• /
• 1996

Analyses of the viscous and end effects on electromagnetic (EM) pumps of annular linear induction type for the sodium coolant circulation in Liquid Metal Fast Breeder Reactors have been carried out based on the MHD laminar flow analysis and the electromagnetic field theory. A one-dimensional MHD analysis for the liquid metal flowing through an annular channel has been performed on the basis of a simplified model of equivalent current sheets instead of three-phase currents in the discrete primary windings. The calculations show that the developed pressure difference resulted from electromagnetic and viscous forces in the liquid metal is expressed in terms of the slip, and that the viscous loss effects are negligible compared with electromagnetic driving forces except in the low-slip region where the pumps operate with very high flow velocities comparable with the synchronous velocity of the electromagnetic fields, which is not applicable to the practical EM pumps. A two-dimensional electromagnetic field analysis based on an equivalent current sheet model has found the vector potentials in closed form by means of the Fourier transform method. The resultant magnetic fields and driving forces exerted on the liquid metal reveal that the end effects due to finiteness of the pump length are formidable. In addition, a two-dimensional numerical analysis for vector potentials has been performed by the SOR iterative method on a realistic EM pump model with discretely-distributed currents in the primary windings. The numerical computations for the distributions of magnetic fields and developed pressure differences along the pump axial length also show considerable end effects at both inlet and outlet ends, especially at high flow velocities. Calculations of each magnetic force contribution indicate that the end effects are originated from the magnetic force caused by the induced current ( u x B ) generated by the liquid metal movement across the magnetic field rather than the one (E) produced by externally applied magnetic fields by three-phase winding currents. It is concluded that since the influences of the end effects in addition to viscous losses are extensive particularly in high-velocity operations of the EM pumps, it is necessary to find ways to suppress them, such as proper selection of the pump parameters and compensation of the end effects.

• The Journal of Korean Society for School & Community Health Education
• /
• v.1 no.2
• /
• pp.87-104
• /
• 2000

The purpose of this study was to obtain the basic data as a improvement method through the fact-revealing concerning the drinking water management of school and utilization of student. The problems of the research are as follows: First, to investigate status of management of drinking water by area and school. Second, to investigate student's utilization of drinking water by area and school. 1,400 students was selected at 45 elementary and middle-high schools located in Kang-won province, and this study was constituted of two questionnaires(for school's questionnaire and student's questionnaire). The results was analyse through the frequency analysis, $x^2$-test on the basis of the above research problem by SPSS program. The findings of this research are as follows; 1) The Management of School Drinking Water First, the source of school drinking water was mostly piped water. Inspection of water quality has been fulfilled under four times a year, in the other hands, from the result inspection, the schools which was given inadequate determination was 22.2%. Second, reservoir cleaning and hygiene inspection failed far short of the regulations. Especially, reservoir cleaning was managed by exterior consignment industry not low-level officials. Third, school water drinking was the most supplied through the type of water purifier. Water purifier has been distributed to city-located and middle-high school highly, factually the water from water purifier was served with water cup. Fourth, the selection standard of water drinking manager showed slightly differently by school, accordingly there need to develope integrated system with the respective to its effective systematic management. Fifth, water cup was mostly treated by only water clear, which is to vindicate the problems concerning hygiene management. 2) Utilization of school student on Drinking Water First, Disbelief on drinking water of school student was very high. Especially, proportion of middle-high school student's disbelief of drinking water was higher than elementary school student, also girls higher than boys. Many of student have heard to don't drink water from around people. And there were showed meaningful differences by area and school. Second, It was showed many student recognize had to utilize water purifier, boiled water. However, they have still drunken the tap water or portable water from their home. Third, Many of student showed negative response with the respective to the management conditions of drinking water in classroom, There were showed meaningful differences by area and school. From the fact-revealing of water cup management, Students mostly answered to 'only water clear' and the answer of 'None use' or 'With personal cup' was higher. Fourth, In bad experience of Drinking Water, student mostly answered to 'occasionally' and there were showed meaningful differences by school. student's disease experience with school drinking water was few and there were showed meaningful differences by area and gender.

• Asian-Australasian Journal of Animal Sciences
• /
• v.26 no.6
• /
• pp.755-765
• /
• 2013

The accumulation of inbreeding and the loss of genetic diversity is a potential problem in the modern swine breeds in China. Therefore, the purpose of this study was to analyze the pedigrees of Chinese Duroc (CD), Landrace (CL) and Yorkshire (CY) swine to estimate the past and current rates of inbreeding, and to identify the main causes of genetic diversity loss. Pedigree files from CD, CL and CY containing, 4529, 16,776 and 22,600 records, respectively, were analyzed. Pedigree completeness indexes of the three breeds, accounting for one generation back, were 83.72, 93.93 and 93.59%, respectively. The estimated average annual inbreeding rates for CD, CL and CY in recent three years were 0.21, 0.19 and 0.13%, respectively. The estimated average percentage of genetic diversity loss within each breed in recent three years was about 8.92, 2.19, and 3.36%, respectively. The average relative proportion of genetic diversity loss due to unequal contributions of founders in CD, CL and CY was 69.09, 57.95 and 60.57%, and due to random genetic drift was 30.91, 42.05 and 39.43%, respectively. The estimated current effective population size for CD, CL and CY was 76, 117 and 202, respectively. Therefore, CD has been found to have lost considerable genetic diversity, demanding priority for optimizing the selection and mating to control future coancestry and inbreeding. Unequal contribution of founders was a major cause of genetic diversity loss in Chinese swine breeds and random genetic drift also showed substantial impact on the loss of diversity.