• Fibers and Polymers
• /
• 제2권4호
• /
• pp.190-195
• /
• 2001

Additives, such as sodium perborate and borax, were examined in dialdehyde wrinkle resistant finishing of cotton. Results indicated that the whiteness index(WI) of cotton treated with dialdehyde and additive showed about 90% of WI of the untreated cotton but with decrease in wrinkle recovery angle (WRA) due to inhibition effect of these additives. Effect of additive on the WRA reduction was more prominent with glutaraldehyde than with glyoxal. Reduction in WRA of cotton treated with both dialdehydes and boron compound was minimized by simultaneous addition of formic acid in the bath. Addition of formic acid was also generally beneficial in maintaining WI retentions after 8 months storage. Furthermore, boron compounds were also effective in improving retentions of mechanical properties. By FTIR analysis the residual aldehyde group was detected on the dialdehyde-finished cotton, whereas no peak was shown by addition of boron compounds. This suggested that the residual aldehyde group was a main cause of fabric yellowing on the dialdehyde-finished cotton. Dialhehyde with boron compound, therefore, can be used to replace a conventional formaldehyde-containing wrinkle resistant finishing of cotton.

• 소성∙가공
• /
• 제17권5호
• /
• pp.328-336
• /
• 2008

A criterion which predicts wrinkle initiation on workpiece in groove rolling process based on finite element analysis is proposed. Fundamental idea considered in the criterion is using the difference between flat rolling which don't cause wrinkling at all and groove rolling which usually accompanies it. The proposed criterion assumes that irregular distribution of shear strain on workpiece during groove rolling is attributable to the initiation of wrinkling. The proposed criterion has been applied to roughing train in the rod mill of SEAH BESTEEL Inc. A new design of 2nd pass (square roll groove) was suggested, machined and applied. Results reveal that the proposed criterion could point out the location of wrinkle initiation and could reduce onset of wrinkle.

• 펄프종이기술
• /
• 제39권4호
• /
• pp.21-28
• /
• 2007

A simple method of on-line stiffness measurement using the wrinkling behavior of paper web between two rollers was presented. The theory and the equation were presented, and lab and mill tests were executed. We called the stiffness measured by Taber tester as 'Taber stiffness', and by tension wrinkling measurement as 'wrinkle stiffness', respectively. Lab experimental results showed Taber and wrinkle stiffness are almost equivalent. In the mill experiment, we could measure the stiffness in the wet state and in the dry state. The dry wrinkle stiffness was close to the taber stiffness, but the wet wrinkle stiffness was much lower than the corresponding taber stiffness.

• 한국항공우주학회지
• /
• 제41권12호
• /
• pp.940-949
• /
• 2013

본 논문에서는 삼각형 태양돛의 주름저감설계 방안에 대한 연구를 수행하였다. 태양돛 멤브레인에 부분적으로 발생하는 주름으로 인하여 구조물의 추력성능과 제어성능에 영향을 받을 수 있으므로 멤브레인에 발생하는 주름을 감소시키거나 제거하는 것은 매우 중요하다. 주름을 저감하는 방법으로 태양돛 멤브레인과 붐을 연결하는 케이블의 하중의 각도를 조정하는 방식, 현수선 방식 및 현수선-와이어 방식을 고려하였으며 매개변수 연구를 통하여 주름저감효과에 대해 체계적으로 조사하였다.

• Fibers and Polymers
• /
• 제7권2호
• /
• pp.139-145
• /
• 2006

Cotton fabric was treated with montmorillonite (MMT) so as to evaluate its effectiveness on improving its wrinkle resistance. The MMT in emulsion form was applied to cotton fabric by padding and finally the wrinkle resistance of the MMT-treated cotton fabric was improved. Furthermore, instrumental methods were used for studying the presence of MMT particles on the cotton fabric surface. It was noted that nano-scale MMT particles adhered on the fiber surface and the particle size played an important role in influencing the wrinkle resistance of the cotton fabric. The experimental results are discussed thoroughly in this paper.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 춘계학술대회 논문집
• /
• pp.415-418
• /
• 2008

We propose a criterion which predicts wrinkle initiation on workpiece in groove rolling process based on finite element analysis. Fundamental idea introduced in the criterion is to examine the difference between flat rolling which don't' cause wrinkling at all and groove rolling which usually accompanies it. The proposed criterion assumes that irregular distribution of shear strain on workpiece during groove rolling is attributable to the initiation of wrinkling. The proposed criterion has been applied to roughing train in the rod and bar mill of SEAH BESTEEL Inc. A new design for 2nd pass (square roll groove) was suggested, machined and applied. Results reveal that the proposed criterion in this study could point out the location of wrinkle initiation during groove rolling and could reduce onset of wrinkle on final products.

• 한국항공우주학회지
• /
• 제38권5호
• /
• pp.421-426
• /
• 2010

본 논문에서는 코너에서 대각선방향으로 인장하중을 받고 있는 접힌자국이 있는 사각형 멤브레인에서 두께가 주름 거동에 미치는 영향을 기하학적 비선형 후좌굴 유한요소해석을 통하여 연구하였다. 멤브레인은 쉘 요소로 모델링 하였고 좌굴을 발생시키기 위하여 면외방향으로 미소의 무작위성 기하학적 결함을 메쉬에 가하였다. 해석은 접히지 않은 원멤브레인과 수직방향으로 접힌 멤브레인에 대해 수행하였고 그 결과를 비교하였다. 해석결과 멤브레인의 두께가 감소함에 따라 주름의 발생과 성장을 크게 촉진함을 알 수 있었다. 또한 접힌 자국의 초기 전개각이 증가할수록 국부주름의 낮은 하중에서 발생하였으나 전역주름으로의 성장은 지연되는 경향을 보였다.

• 한국항공우주학회지
• /
• 제41권11호
• /
• pp.865-873
• /
• 2013

본 논문에서는 유한요소해석에 의한 막재료의 주름 해석 기법에 관하여 연구하였다. 삼각형 세일 형상에 대해 멤브레인 요소와 쉘 요소를 사용하여 주름해석을 수행하였다. 멤브레인 요소를 이용한 기법에서는 주름을 벌칙매개변수에 의한 물성치를 수정하는 알고리즘을 상용프로그램 내 사용자 서브루틴을 통하여 구현하였다. 쉘 요소에 의한 기하학적 비선형 후좌굴 기법에서는 면외방향의 좌굴을 발생시키기 위하여 모델의 메쉬에 작은 크기의 기하학적 결함을 심는 방법을 사용하였다. 쉘 방법에서는 내연 및 외연해석 기법을 고려하였다. 요소수의 증가에 따른 수렴성과 결과의 정확도의 관점에서 멤브레인 요소법과 쉘 요소법의 효율성을 비교하였다.

• 한국약용작물학회지
• /
• 제19권6호
• /
• pp.508-513
• /
• 2011

The bark of the root and stem of Ulmus davidiana var. japonica has been used as a traditional Korean medicine to treat inflammatory disorders. This plant reportedly shows antioxidant, anticancer, and anti-inflammatory effects. In this study, we investigated the protective effects of Ulmus davidiana var. japonica ethanolic extract (UDE) on UVB irradiation-induced wrinkle in hairless mice. We evaluated for their free radical-scavenging activities against 1,1-diphenyl-2-picrylhydrazyl (DPPH) and the anti-elastase activities, and for their anti-matrix metalloproteinase-1 (MMP-1) activity in human skin fibroblast cells. In the wrinkle measurement and image analysis of skin replicas, the results showed that UDE significantly inhibited wrinkle formation caused by chronic UVB irradiation. These results suggest that UDE has anti-wrinkle activity.

• BMB Reports
• /
• 제46권9호
• /
• pp.465-470
• /
• 2013

Bone morphogenetic proteins (BMPs) have diverse and important roles in the proliferation and differentiation of adult stem cells in our tissues. Especially, BMPs are well known to be the main inducers of bone formation, by facilitating both proliferation and differentiation of bone stem cells. Interestingly, in skin stem cells, BMPs repress their proliferation but are indispensable for the proper differentiation into several lineages of skin cells. Here, we tested whether BMP antagonists have an effect on the prevention of wrinkle formation. For this study we used an in vivo wrinkle-induced mouse model. As a positive control, retinoic acid, one of the top anti-wrinkle effectors, showed a 44% improvement compared to the non-treated control. Surprisingly, bone morphogenetic protein receptor 1a extracellular domain (BMPR1a-ECD) exhibited an anti-wrinkle effect which was 6-fold greater than that of retinoic acid. Our results indicate that BMP antagonists will be good targets for skin or hair diseases.