• Title/Summary/Keyword: wps

Search Result 74, Processing Time 0.033 seconds

Outdoor location tracking system design using vehicle and sensor information (차량 및 센서 정보를 활용한 실외 위치 추적 시스템 설계)

  • Lee, Chul-Woo;Lee, Hyun-Sup;Kim, Jin-Deog
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 2011.05a
    • /
    • pp.217-219
    • /
    • 2011
  • 현재 차량 위치 추적 시 사용빈도가 가장 많은 방법은, 지도상에 자신의 위치를 수치로 보여주는 GPS 수신기를 사용하여 지도상 실외의 위치를 측위 한다. 위의 GPS를 이용한 내비게이션은 차량의 진행방향, 출발 도착 지점을 설정하여 차량을 운행한다. 또한 GPS 음영지역 및 신호 지연의 문제를 해결하기 위한 지자기센서와 가속도센서를 사용하는 시스템도 있다. 그러나 센서를 활용할 경우 차량의 방향 정보를 얻을 수 있지만 음영 및 신호 왜곡 시간이 길어질 경우 정확한 차량의 위치를 판단 할 수 없다. 즉, GPS의 신호에 오류가 있을 경우 차량의 이동거리를 알 수 없으므로 차량의 회전 정보는 효용 가치가 떨어진다. 따라서 이를 보정하기 위해서는 정확한 차량의 위치를 판단할 수 있는 시스템이 필요하다. 본 논문에서는 기존 GPS의 문제를 해결하기 위해 차량의 속도정보와 스마트폰의 지자기센서를 활용한 실외 위치 추적 시스템과 WiFi 정보를 활용한 차량용 WPS시스템을 설계 하였다.

  • PDF

The impact of external workers on the employment performance (간접고용이 고용성과에 미치는 효과)

  • Lee, Si-Kyoon
    • Korean Journal of Labor Studies
    • /
    • v.17 no.1
    • /
    • pp.243-267
    • /
    • 2011
  • This paper explores the impact of the external workers on employment performance in Korea, using Workplace Panel Survey (WPS). I find the use of external workers, e.g., temporary agency workers, in-subcontract workers, and contract workers, is mainly negatively related with employment performance. Especially the use of in-subcontract workers and contract workers is negatively related with the job creation rate of standard workers and the net growth rate of internal workers. The results show the existence of a substitute effect between the use of internal and external workers.

The Effects of High Commitment HRM on the Service Performance: Mediating Effect of Internal Innovation Direction (고몰입 인적자원관리가 서비스성과에 미치는 영향과 내적혁신방향의 매개효과)

  • Kim, Jin-Hee
    • Journal of Service Research and Studies
    • /
    • v.7 no.1
    • /
    • pp.65-82
    • /
    • 2017
  • This study is to examine the effects of high commitment HRM on service performance in the service industry, and to examine the mediating effect of the organizational internal innovation direction. Specifically, the direction of internal innovation consists of high-value-added HR and service and cost-reduction downsizing. We assumed that the high-value-added direction of HR and service will have a positive mediating effect. And assumed that cost-reduction downsizing direction has negative mediating effect. The data were collected from 2013 workplace panel survey(WPS) of the Korea Labor Institute(KLI). Among the 1,775 companies, 896 companies classified as wholesale and retail, transportation, professional scientific services, education services, health social services, financial services, and other services (such as information society support services) were extracted and used. In summary, high-commitment HRM has a positively significant effect on the direction of high value-added innovation of HR and services, and has a negatively significant effect on the cost-reduction downsizing direction. In addition, the direction of high value-added innovation of HR and service was positive effect on service performance, and cost-reduction downsizing innovation direction has a negative effect on service performance. And the direct effect of high commitment HRM on service performance has not been confirmed. However, we confirmed the positive mediating effect of high value-added innovation direction of HR and services, and confirmed that the negative mediating effect of cost-reduction downsizing. Therefore, it is confirmed that the two variables have a full mediating effect on the relationship between high commitment HRM and service performance.

Design and Implementation of the Converged Platform for Geospaital and Maritime Information Service based on S-100 Standard (S-100 표준 기반 공간 및 항행정보 융합 서비스 플랫폼 설계 및 구현)

  • Kim, Min Soo;Jang, In Sung;Lee, Chung Ho
    • Spatial Information Research
    • /
    • v.21 no.6
    • /
    • pp.23-32
    • /
    • 2013
  • Recently, there has been much interest in the converged platform that enables the harmonized collection, integration, exchange, presentation and analysis of various kinds of marine information by using the ICT means. Regarding such the converged platform, S-100 standards including the international hydrographic data model are being announced and various studies have been published based on the S-100 standards. However, the existing studies have presented simple solutions for only given problems on the converged service of the maritime information. They could not propose the design concept of the converged platform which makes it possible to provide the standardized and integrated services among the geospatial data, the real-time maritime data, and the next ENC. Therefore, we propose design and implementation details of the converged service platform for the geospatial and the maritime data based on the S-100, WMS, WMTS, WPS, SOS standards. The proposed platform has advantages of supporting both the S-57 and the S-101, supporting the converged services of heterogeneous geospatial data and ENC data, supporting the real-time services of sensor data such as weather, AIS, and CCTV, and supporting the development of various kinds of maritime systems such as ECDIS, ECS, VTS based on the WebApp service. Finally, we proved the effectiveness of our proposed platform through the actual implementation of the converged service of geospatial data, S-101 data, and KWeather data.

Implementation of P2P Standard Group Formation in WiFi Direct for Direct Communication Services between Internet-of-Things Gateways (사물인터넷 게이트웨이 간의 직접통신 서비스를 제공하기 위한 와이파이 다이렉트 P2P Standard Group Formation 구현)

  • Park, Yungi;Han, Kwonhee;Seo, Jeongwook;Kim, Hyunsik;Park, Yongsuk
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 2015.10a
    • /
    • pp.436-438
    • /
    • 2015
  • In this paper, a P2P Standard Group Formation (P2P-SGF) method in Wi-Fi Direct is presented to provide direct communication services between Internet-of-Things (IoT) gateways. Generally, network traffic congestion and speed reduction problems are caused when transmitting mass data as well as measured data from many sensors between IoT gateways via an Access Point (AP). For solving these problems, it is required to implement Wi-Fi Direct efficiently transmitting mass data between IoT gateways without passing through the AP. The implemented P2P-SGF method basically performs Discovery, GO (Group Owner) Negotiation, WPS (Wi-Fi Protected Setup) Provisioning, and Address Configuration. Especially, it supports the DLNA (Digital Living Network Alliance) service function for sharing mass data between IoT gateways. Some experimental results verify that it can successfully share large video files.

  • PDF

Improved Face Recognition based on 2D-LDA using Weighted Covariance Scatter (가중치가 적용된 공분산을 이용한 2D-LDA 기반의 얼굴인식)

  • Lee, Seokjin;Oh, Chimin;Lee, Chilwoo
    • Journal of Korea Multimedia Society
    • /
    • v.17 no.12
    • /
    • pp.1446-1452
    • /
    • 2014
  • Existing LDA uses the transform matrix that maximizes distance between classes. So we have to convert from an image to one-dimensional vector as training vector. However, in 2D-LDA, we can directly use two-dimensional image itself as training matrix, so that the classification performance can be enhanced about 20% comparing LDA, since the training matrix preserves the spatial information of two-dimensional image. However 2D-LDA uses same calculation schema for transformation matrix and therefore both LDA and 2D-LDA has the heteroscedastic problem which means that the class classification cannot obtain beneficial information of spatial distances of class clusters since LDA uses only data correlation-based covariance matrix of the training data without any reference to distances between classes. In this paper, we propose a new method to apply training matrix of 2D-LDA by using WPS-LDA idea that calculates the reciprocal of distance between classes and apply this weight to between class scatter matrix. The experimental result shows that the discriminating power of proposed 2D-LDA with weighted between class scatter has been improved up to 2% than original 2D-LDA. This method has good performance, especially when the distance between two classes is very close and the dimension of projection axis is low.

Design of radio map for IPS robust to signal noise (신호 잡음에 강인한 IPS용 라디오맵 설계)

  • Lee, Hyoun-Sup;Kim, Jin-Deog
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 2014.10a
    • /
    • pp.422-424
    • /
    • 2014
  • IPS 측위는 실내의 특정 위치의 무선 신호 정보를 수집하여 radio map을 구성하고 측위 시점에 구성된 정보와 수집된 무선 정보를 비교하여 현재 위치를 판단한다. 비교방법은 핑거프린트, 삼각 측량법 등의 알고리즘을 활용하며 최근에는 wifi 신호와 다른 신호를 혼합하여 계산하거나 다중 비교 방식을 사용하여 정확도를 높이는 측위 방법도 개발되었다. 앞서 언급한 측위방법은 비교적 정확한 실내 위치를 판단하지만 구축된 radio map정보와 측위 시점에서 수집된 신호 정보가 상이할 경우 측위 정확도는 크게 하락한다. 구축 시점과 측위 시점의 무선 신호에 차이가 발생하는 이유는 신호 발생 기기의 고장, 장애물 발생, 채널 간섭 현상 등이다. 특히 채널 간섭은 구축된 신호 영역 내에 동일 채널 및 인접 채널을 가지는 AP 및 테더링 기기 등이 신규로 설치되었을 때 측위에 영향을 주는 신호잡음 현상이다. 본 논문에서는 앞서 언급한 문제점을 해결하기 위해 신호 잡음에 강인한 IPS용 라디오맵에 대하여 제안한다. 제안하는 radio map 설계 방법은 측위 시점에 신호잡음이 발생하였을 때 이 정보를 수집하여 기존 radio map에 반영하여 정확도를 유지하는 방법이다. 이 방법을 적용할 경우 신호잡음에 능동적으로 대처하여 IPS 측위의 정확도를 높일 수 있을 것으로 사료된다.

  • PDF

The Effect of Labor Unions on Job Training Programs (노동조합이 교육훈련에 미치는 영향)

  • Lee, Hee sun;Kwon, Da young;Choe, Chung
    • Journal of Labour Economics
    • /
    • v.43 no.4
    • /
    • pp.179-203
    • /
    • 2020
  • This study aims to compare and analyze the impact of labor unions on job training programs using two different longitudinal data, Workplace Panel Survey (WPS) and Korean Labor and Inocme Panel Study (KLIPS). By applying the Correlated Random Effect (CRE) model to both individual-level and establishment-level data, we observe that labor unions increase the likelihood that establishments provide employees with job training programs and workers participate in the trainings. Our results shed light on the role of labor unions to increase the opportunities of job training programs for workers.

  • PDF

Design of Variable Grid Map based on Wi-Fi Signal for Location Search (위치탐색을 위한 Wi-Fi 신호 기반 가변 Grid Map 설계)

  • Kim, Dong-Hyeon;Yi, Hyoun-sup;Jang, Si-Woong
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 2022.10a
    • /
    • pp.59-61
    • /
    • 2022
  • Among indoor positioning system techniques using wireless APs, fingerprint techniques collect Mac information and reception strength of APs before performing positioning, build a radio map, and compare it with AP information collected during positioning. However, the existing Radio Map construction method has a problem in that signal interference occurs due to collisions of numerous APs depending on the indoor environment, and the signal strength search result is not always constant. Therefore, this paper compares the existing fixed radio map construction method and the variable radio map construction technique that actively analyzes and constructs the measurement area itself according to signal strength.

  • PDF

Design of the 1.5kVA Class Wireless Power Transfer Device for Battery Charging of Integrated Power Control System in MSAP (군 이동기지국시스템(MSAP) 통합전원제어장치 배터리 충전용 1.5kVA급 무선전력전송기기의 설계)

  • Kim, Jin-Sung;Kim, Byung-Jun;Park, Hyeon-Jeong;Seo, Min-Sung
    • The Journal of the Korea institute of electronic communication sciences
    • /
    • v.15 no.3
    • /
    • pp.413-420
    • /
    • 2020
  • The Tactical Information and Communication Network system provides real-time multimedia services such as voice and data by utilizing the Mobile Subscriber Access Point. At this time, an external transmission path is constructed through the Low Capacity Trunk Radio and the High Capacity Trunk Radio system. The communication devices of each wireless transmission system are mounted on a tactical vehicle and a secondary battery is used to prevent a power interruption when the supply power to the tactical vehicle is transferred to the integrated power control device. In this paper, the basic design of the Wireless Power Transfer device for charging the battery of the integrated power control system of the mobile base station system using the Loading Distribution Method and checking the number of primary windings and the core material selection by the air gap through the Finite Elements Method.