• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.23 no.4
• /
• pp.324-331
• /
• 2001

The present study was aimed to investigate the effects of latency period on alveolar ridge distraction using the intraoral distraction device. Nine adult mongrel dogs of either sex, weighing about 15kg, were used. They were divided into 3-day, 5-day, and 7-day groups according to the latency period. The left upper and lower premolars and first molars were extracted. Twelve weeks after the extraction, an osteotomy was performed and the distraction device was applied. After the latency period, the distraction was applied at a rate of 1.2mm for 8 days. The distraction device was left in place for 2 weeks to allow consolidation and was then removed. The animals were sacrified at 8 weeks after completion of distraction and were examined macroscopically, radiographically, and histologically. After completion of the distraction, the alveolar crest protruded prominently, showing the vertical augmentation of the alveolar bone. Soft tissues were broken down after the 6th day of distraction in 3-day latency group, and premature union occurred on the 7th day of distraction in the 7-day latency group. The average distance was $9.40{\pm}0.3mm$ in 3-day latency group, $9.35{\pm}0.1mm$ in 5-day latency group, and $8.85{\pm}0.1mm$ in 7-day latency group. In the radiograph taken at 8 weeks after distraction, there was slight bone resorption around the medial and distal edges of the alveolar bone segment, and a new bone deposition was observed in the neighboring alveolar crest area in all groups. Fibrous tissues were present in a part of the buccal cortical bone area of the distraction gap, and the woven and lamellar bones were observed in the distracted gap. There were bony bridges in the distraction gap in all animals examined. These results suggest that optimal time of latency period on alveolar ridge distraction using the intraoral distraction device is about 5 days in dogs, and about 7days in human beings.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.9
• /
• pp.3348-3354
• /
• 2011

Oleanolic acid (OA) as template molecule, polyamide-6 (PA6) as basement membrane and poly(styrene-comaleic acid) (PSMA) were used to prepare PA6/PSMA-OA molecularly imprinted composite membranes by phase inversion method in supercritical $CO_2$ ($ScCO_2$). The template molecule (OA), [poly(styrene-co-maleic anhydride) (PSMAH), PSMA, molecularly imprinted membranes (MIMs) imprinting OA and MIMs after elution were all characterized by Fourier transform infrared spectroscopy (FTIR). The conditions that were the mass ratio between PSMA and OA from 3:1 to 8:1, temperature of $ScCO_2$ from $35^{\circ}C$ to $50^{\circ}C$ and pressure of $ScCO_2$ 12 MPa to 17 MPa were studied. It was obtained the largest adsorption rate and purity of OA after adsorption of the resultant MIMs, 50.41% and 96.15% respectively. After using PA6 film and non-woven fabrics as basement membrane respectively, it was found that smaller aperture of PA6 was used as basement membrane, a higher adsorption rate and a higher purity of OA after adsorption of the MIMs were obtained, and so were the stability and reproducibility of the resultant MIMs. After template molecules being removed, the MIMs had effective selectivity hydrogen bonding to separately bind in the binary components to the template molecules-oleanolic acid.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.29 no.5
• /
• pp.92-100
• /
• 2001

This study was conducted to evaluate the growth rate of landscape trees produced in containers for three year, and the growth rate of the establishment period during sixth month~twelve months after transplanting. Two types of container such as plastic pot(pot) and fabric growing bag(bag) were adopted to restrict tree roots. Each type of container was divided into seven sub-types. One traditional production method was included as comparison. Two landscape woody plant species (Magnolia denudata, Albizzia julibrissin) were planted in the seven sub-types of container. After one or two growing season in the container, the trees of each container type were transplanted. Half of the trees were transplanted in the mild spring season, and the other half were transplanted in the improper summer season. The data was collected on the diameter of root cellar and the tree height in each year. The research results are as follows; 1. Container production method was lower than the traditional production methods by 1.3 times ~ 2 times in the growth rates. 2. The Geocell bag and Root control bag revealed higher growth rates than pp-woven bag. And pot- in-pot(double pot)system revealed higher growth rates than the ether container pot system in A denudata. There were no differences in the growth rates between container production system in Albizzia julibrissin. 3, The growth rates of improper transplanting trees was high in the \"pot\" type - \"bag\" type - \"control\" in descending order. Especially, the growth rates of \"pot\" type revealed higher than \"control\" by 4 times. 4. From the results of ANOVA and Ad hoc test, the variable of growth factors of each container types in improper transplanting experiment was not significant for a range of 5% or 1% level. And the growth rates of traditional production method was lower than the container production method. 5. There was no differences in growth rate between the containerized and the traditional production system in the case of proper transplanting experiment. The growth rates of diameter of root collar was higher in the \"control\". The growth rates of tree height was higher in the \"bag\" type. Finally, based upon the results of this study, subsequent research on the development of container materials and maintaining methods that focused on the growth rates would be required.aintaining methods that focused on the growth rates would be required.

• Journal of Environmental Science International
• /
• v.27 no.5
• /
• pp.291-297
• /
• 2018

Vertical farming systems offer many advantages in urban spaces. They have also been proposed as an engineering solution to increase the productivity per unit area of cultivated land by extending crop production in the vertical dimension. However, soil water retention is a major constraint affecting the plant environment. This study analyzed the effects of growth environment of Tropaeolum majus and Fragaria spp., on the vertical farming system, by using four different types of cover material types including sphagnum moss (Control), a shading net (S.N.), multi-layered fabric (M.L.F.), and non-woven fabric (N.W.F.). The volumetric soil moisture contents and plant characteristics were investigated from May to September 2014. Plant materials were individually cultivated in hanging baskets measuring $30{\times}17{\times}17cm$, filled with a mixture of soil and perlite, and placed at 1.5m height. Each treatment was performed in quadruplicate and consisted of five plants, amounting to a total of 20 plants. The analysis indicated that different covers were associated with multiple functions and soil water retention improvements may have a positive impact on the vertical farming system. The difference in soil water retention increased in the following order: M.L.F. > Control > N.W.F. > S.N.. Furthermore, the differences in plant height and survival rate increased in the following order: M.L.F. > Control > N.W.F. > S.N. Therefore, M.L.F yielded satisfactory good response for the vertical farming system of cover materials. Our results clearly demonstrate that vertical spaces represent an attractive alternative to urban farming and suggest that further increases in yield may be achieved via different cover materials in vertical farming using hanging baskets.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.28 no.4
• /
• pp.302-309
• /
• 2002

In order to improve the success rate of implants, various implant designs have been developed. Although there have been enough efforts to handle the surface of the implant with careful choice of material and mechanics so that the bone and the implant can be tightly joined together, they have still failed to play the role of periodontal ligaments of the natural teeth in the past. The role of periodontal ligaments is very important since it can improve the initial stability of implant by absorbing the impacts. The purpose of this study is, thus, to test the possibility of alleviating the impact when the surface of the implant was coated with chitosan, a natural polymer, and making sure that the coated material stayed on. Then, the condition of newly developed bone formation and the degree of inflammation in response was closely observed in the surface level. In the main experiment, Chitosan coated implant ($3.3mm{\times}7mm$) was implanted on both the right and the left side of rabbit's femur. The animals were each sacrificed on the $1^{st}$, $2^{nd}$, $3^{rd}$, $7^{th}$, $14^{th}$, $21^{st}$ and 28th day. The process was observed under an light microscope after the Toluidin Blue staining. From the experiment, it was found that the chitosan was evenly distributed on the surface of the screws, and the implant was adjoined with adjacent bone. There was a sign of inflammation on the $3^{rd}$ day, but on the $14^{th}$ day, the formation of woven bone and newly formed bones were noticed. Also, chitosan filled the gap was formed between the implant and the newly formed bone. The implant, the chitosan and the newly formed bone were forming one unit as a result. Therefore, it was found that chitosan coated implant could absorbe the impact in the initial stage of implant.

• Journal of Bio-Environment Control
• /
• v.12 no.2
• /
• pp.72-76
• /
• 2003

This study was conducted to estimate stimulation of plant growth of green and red leafy lettuces (Lactuca sutiva L. cv. Chungchima and Jugchima) at affected by covering method and time with protected film materials containing concentrated PO film and GA$_3$ foliar spray. Plants were covered with ‘Pasraido’ material from October 26 to November 31 (direct 1), from November 5 to November 31 (direct 2), or with a tunnel, or direct 2＋ tunnel. Mean air temperature and relative humidity under the covering were higher in direct and tunnel, direct and non-covering, in that order. The fresh weight and dry weight of red and green lettuces increased in direct and tunnel followed by direct 1, direct 2, tunnel and the control. GA$_3$ treatment promoted the growth in all covering methods, but decreased the chlorophyll contents. Fresh weight and dry weight were higher in red lettuce than in green lettuce in the control.

• Journal of Bio-Environment Control
• /
• v.25 no.4
• /
• pp.288-293
• /
• 2016

The study was performed to evaluate thermal insulation covering materials (TICMs) to protect peach trunks against freezing temperatures in winter season by investigating thermo-physical properties and practical thermal insulation effect of the TICMs which was made of white non-woven fabrics, yellow paper sheets, and waterproof fabric pads. Among the three TICMs, Waterproof fabric pad (double layer) possessed the best performance about thermal insulation rate and thermal resistance among three kinds of TICMs. Day thermal insulation effects of waterproof fabric pad, which prevent from temperature rise on the bark tissues of trunks during the day time, were $14.09^{\circ}C$. Night thermal insulation effects of them, which prevent from temperature decline on the bark tissues of trunks at night time, were $7.23^{\circ}C$. Waterproof fabric pad showed the highest day and night thermal insulation effects. Thus our results suggest that development of TICMs using waterproof fabric pad might be helpful to protect the bark tissues of trunks from freezing injury.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.13 no.4
• /
• pp.400-411
• /
• 1989

Moisture related properties of fabrics in dynamic modes are considered to be important in the judgement of the subjective comfort characteristics of clothing fabrics. In the current study, an attempt to improve the cobaltous chloride test method was made which has been known as a convenient screening test for dynamic surface wetness. The color changes of cobaltous chloride treated fabrics on the simulated sweating skin were calibrated against standard color strips. The standard color strips were made of all typs of test fabrics and installed inside of the test tubes containing a series of saturated salt solutions, which gives more quantitative informations on dynamic moisture transfer Influences of fiber types and finishes on dynamic moisture transfer in textiles were studied using a single layer of fabric samples. Fiber types included $100\%$ cotton, C/P 50/50, C/P 35/65. Durable press and soil release finished cotton and C/P 50/50 fabrics were also included. There were significant fiber effects on the dynamic moisture transfer. The order of time taken to reach to the specified $\%$ RH was C/P 35/65$100\%$ cotton fabrics. It was possible to detect significant finish effects by increasing the concentrations of cobaltous chloride solutions. The order of time taken to reach to the specified $\%$ R.H was durable press$100\%$ cotton, C/P 50/50, C/P 35/65 and $100\%$ PET were placed at the inner side of the outer layer and tested. It was shown that cobaltous chloride treated $100\%$ cotton fabirc was easier to detect color changes than C/P blend fabic in the double layer experiments. By placing test sample under the cobaltous chloride treated cotton fabrics, it was able to detect the differences among the test samples, some of which were known to be difficult in padding with cobaltous chloride solutions. Besides, the double layer method would provide with the broader application of the cobaltous chloride method in !uture, since it is possible to test the dynamic moisture transfer of clothing as worn.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.34 no.3
• /
• pp.274-282
• /
• 1998

This study deals with sinking resistance for purse seine, in the case of different d/l, ratio of twine diameter and leg length. Experiments carried out on the six types simplified reduced model seines which were made of knotless netting. The nettings were woven in different leg length 4.3, 5.0, 5.5, 6.0, 6.6 and 7.7mm of polyester 28 tex two threads two -ply twine, and each of the seines were named I, II, III, IV, V and Ⅵ seine. Dimension of seine models were 450cm for corkline and 85cm for seine depth, each seines rigged up 160g of float for a floatline and 50g (underwater weight) of lead for a leadline. Experiments were measured in the observation channel of a flume tank at the static conditions Sinking motion was recorded by the two sets TV-camera for VTR which were placed in top and side of the model seine, and reading coordinate carried out by the video digitization system. An analysis were calculated out by simultaneous differential equations for numerical method by Runge - Kutta - Gill sub - routine. The results obtained were as follows: 1. Average sinking speed of seine of seine margin was fastest for Ⅵ seine followed by V, IV, III, II and I seines. 2. The coefficient of resistance for a seine wall was depended upon the ratio of d/l : KD =0.081 (d/l )-0.5 3. The coefficient of resistance for netting bundle was not depended upon the ratio of d/l :CR = 0.91 (), d : Twine diameter, l : Leg length, : Density of netting materals, $\omega$ : Density of water

• Journal of the Korean Society of Costume
• /
• v.62 no.4
• /
• pp.107-122
• /
• 2012

The purpose of this study is to investigate the changes and developments that occurred as a result of the exchanges of gyeong-geum(經錦), a warp-faced compound weave of East Asia, and wie-geum(緯錦), a weft-faced compound weave of West Asia. In order to maximize the efficiency of this research, topics were narrowed down to the weaving skills and patterns, and the period was limited to the Tang dynasty. The systematic characteristics and differences of gyeong-geum and wie-geum were compared and contrasted through different works of literature. Then the excavated remains of geum-textiles were analyzed and the characteristics of the geum-textiles were defined in chronological order. The origin of wie-geum is traced back to the time when West Asia started to imitate the weaving style of the East Asian gyeong-geum. When combined with the weaving skills of the West Asian, gyeong-geum, which broke through the West and developed into the weft-faced compound twill silk, or samite. The exchange of geum-textiles took place as the techniques of gastric filament woven geum-textiles returned to the East. Along with the pearl roundel motifs of Sassanian Persia, mythical animals and western motifs of hunter patterns were used for the patterns of wie-geumin during the early Tang dynasty. This tendency is related to pa-sa-geum(波斯錦), ho-geum(胡錦), beon-geum(番錦) according to the recorded literature. The 8th and 9th century are periods when the West Asian Persian style was abandoned and the East Asian style, samite, was established. Not only did S twist silk threads replace Z twists, but also the repetition of patterns unfolded along with the weft and the warp. As this tendency was strengthened after the 9th century, the expression of patterns became more vividly colorful and showed both elements of naturalism and realism. The characteristics of the Bosangwha(寶相花) pattern in the Tang period were established with the rampantly repeated rosettes with birds often holding auspicious branches, that fly amid floral compositions.