• Journal of Korean Institute of Industrial Engineers
• /
• v.19 no.3
• /
• pp.103-111
• /
• 1993

There are four flexor muscles at elbow-biceps brachii, brachialis, brachioradialis, pronator teres. Muscle exertion force depends on the following conditions : elbow angle, external workload, and endurance time. The objectives of this study are to investigate the variations of the recruitment patterns of four muscles, and to analyze the changes of the role assigned to each muscle during elbow flexion. For three elbow angles, the transition point of type F motor unit of each muscle is inferred and the changes of the role assigned due to exertion level are identified by electromyographic analysis. The results showed that the recruitment pattern of biceps brachii is constant but those of other muscles are varied depending on elbow angle and exertion level. An EMG multiplexor is developed and simultaneous measurement of electromyographic signals of four elbow flexors is possible.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2000.11a
• /
• pp.48-52
• /
• 2000

본 연구에서는 긴장 스트레스를 평가하기 위하여 작업 중에 긴장 조건을 부가하고 행동량, 주관량, 생리량을 계측하여 통계적으로 긴장 상태 유무와 작업 난이도에 따른 변화를 분석하였다. 긴장 스트레스를 유발시키기 위하여 20대 남자 대학생 3D명에게 세 가지 레벨의 트랙킹 작업을 수행하게 하면서 긴장상태를 유발하여 행동량, 주관신고와 생리신호를 측정하였다. 행동량과 주관신고의 결과를 사용하여 본 연구에서 상정된 작업난이도와 긴장조건이 적절한 가를 살펴보고 생리신호를 사용하여 작업난이도와 긴장감을 분석하였다. 난이도가 낮을 때 HRV의 회귀도와 GSR의 평균값은 긴장 조건이 있을 때가 없을 때에 비해서 통계적으로 유의하게 높게 나타났으며 난이도가 높을 때에는 피부온도의 값이 긴장 조건이 있을 때가 없을 때에 비해서 통계적으로 유의하게 높게 나타났다. 또한 긴장 조건이 있는 경우 작업의 난이도가 높을 때에 낮을 때에 비해서 호흡수의 값이 높게 나타났다. 따라서, 본 연구에서 상정한 긴장감은 양호하게 부가되었고 긴장감은 생리신호를 사용하여 측정할 수 있을 것으로 분석되었다.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.1722-1730
• /
• 2007

According to the result of recent studies, it was revealed that the error of safety-related personnel still plays a significant role in the accidents and/or incidents of a railway system. Accordingly, in order to reduce as well as prevent human errors, it is necessary to: (1) identify the root cause of accidents/incidents, and (2) conduct a research that can provide a systematic as well as an effective way to deal with the identified human errors. To this end, it is essential to suggest appropriate countermeasures based on the result of a task load analysis, which can soundly reduce a high level of the task load put on safety-related personnel. In the light of this concern, about the tasks of railway traffic signallers, a detailed task analysis was conducted in this study. After that, the associated task load scores were quantified by NASA-TLX technique that is one of the most well-known subjective workload measurement techniques. As a result, a set of significant tasks that could put a high task load on railway traffic signallers was identified.

• Journal of Information Technology Services
• /
• v.11 no.4
• /
• pp.215-231
• /
• 2012

It is well known that SaaS(Software as a Service) changeover gives several advantages to organization. One of the advantages is the cost reduction effect of IT resources as well as IT human resources. Another one is the curtailment of software development workload in the field of informatization promotions. Nonetheless, it is hard to find comparison cases regarding the quantitative measurement of the introduction of SaaS before and after. Accordingly, when the Government IDC tries to adopt SaaS, it absolutely needs the empirical study whether SaaS is cost-effectiveness or not. In this study, we focus on variation in the Government administration common tasks, processes and labor costs. Using the Man-Month(MM) estimation methods, We verify that how much TCO(Total Cost of Ownership) is reduced per year.

• Journal of the Korea Society of Computer and Information
• /
• v.24 no.2
• /
• pp.57-66
• /
• 2019

This paper compared the performance with an overview of channel equalization techniques used in high-speed serial transceivers, including the homogeneous architecture and associated components for the GHz interconnect of backplane and cable channels. It also used the MATLAB tool to present system analysis and simulation results for continuous time equivalent structures. In the case of conventional continuous equalization, high frequency deficits occur due to the use of a comparator that is difficult to implement as well as the low speed limit. In this paper, the channel equalization technique based on the power spectrum analysis of clocks was used to compensate for the frequency loss, and the application of the TX+Channel and TX+Equalizer filters enabled the measurement of attenuation and equivalence without comparators. The application of blender and band-pass filters at high speeds also showed significant effectiveness.

• Journal of Industrial Convergence
• /
• v.1 no.2
• /
• pp.17-31
• /
• 2003

Many risk factors with the onset of Low Back Pain(LBP) have been identified, however, lifting out of Manual Material Handling(MMH) was the most important factor to the LBP. Injuries due to lifting took account for 34.0%(227,291) out of the total overexertion in MMH(668,084). The weight, vertical location, twist angle, lifting frequency, and lifting posture were reviewed in this study. Technical information for using the revised lifting equation to evaluate a variety of two - handled manual material handling tasks was suggested. To measure worker's fatigue in lifting task, Lifting Index Simulator(LIS) was create under the revised NIOSH(National Institute for Occupational Safety and Health) lifting equation. For the implementation of the LIS, data was collected in A company manufactures various paints in Si-Wha industrial complex, Kyunggi-Do. The results of the Lifting Index(LI) were analyzed by MANOVA to find the relation with lifting variables collected. It was found that horizontal distance, vertical distance, travelling distance and frequency were significant at the 0.01 level and weight was significant at the 0.05 level. The purpose of this paper is to reduce the chronical low back pain for the manual material handlers.

• International Journal of Internet, Broadcasting and Communication
• /
• v.16 no.1
• /
• pp.148-155
• /
• 2024

We are designed was to find an efficient warm-up method for resistance training for muscle hypertrophy, and 10 males with at least 3 years of resistance training experience were selected as subjects. The 75% 1RM was measured directly based on the pre-measured bench press 1RM. After that, the main experiment of 75% 1RM bench press according to the three warm-up methods was conducted one week apart, and all experiments were randomized and cross-over. Performance according to the warm-up method (3) was measured by total exercise volume, and physiological changes were determined by myocardial workload. All post-measurement data were analyzed using SPSS.22.0 and analyzed using repeated measures one-way ANOVA and contrast comparisons were made using the deviation method. The results showed that the method of gradually increasing the number of repetitions by performing the same intensity as the intensity of the main exercise in the form of muscle hypertrophy, but at submaximal repetitions, showed the highest performance.

• Journal of Korean Academy of Nursing
• /
• v.30 no.6
• /
• pp.1543-1555
• /
• 2000

Home health care is moving into a set of new realities. An era of competition and cost containment has arrived. Before nurses are able to contain costs or describe the relationship between nursing activities, cost must be accurately measured based on the nurse's workload. Nurses in home health care usually desire to measure expenses for one of three reasons : reimbursement, management, or research. The purpose of the study was to investigate the work input by Registered Nurse in each of the home health care activities by relative value units and identify the factors affecting the nurses' total work input in health care services. To measure the work input by nurses, work was defined by four dimensions: time, physical effort, mental effort, and stress. This study used a descriptive-correlational design. Data collection consisted of two phases. In phase I, data on home health activities performed by nurses were collected. In phase II, data on nurses' time, physical effort, mental effort, and stress in each of home health care activities discovered phase I were collected. In this method, the respondent was asked to rate a service in relation to a reference service using a ratio scale. The sample included 39 home health care nurses. The results of the study indicated that home health care activities performed by the nurses were in 10 categories and 69 items. Measuring the relative work inputs in each of home health care activities, and foley catheterization was selected as the reference to service. In terms of time and physical effort dimensions, full bath service was rated as the most strenuous among 69 activities by the respondents, and intramuscular injection was rated as least. It was found that emergency treatment required the highest mental effort and the highest stress, while blood sugar tests required the lowest mental effort. Approximately 91.3% of the variance in total work input was accounted for by the linear combination of time, physical effort, mental effort judgement, and stress. Examining the regression coefficients of those variables, physical effort, time, and stress were found as the predictors which were significantly associated with the total work of nurses in home health care. Professional nursing's next step in the conundrum of economic volatility is to develop a tool to reflect the interaction of functional deficiency and direct professional nursing care. And this will be a more accurate predictor of nursing resource use and ultimately a great forcaeter cost.

• Korean Journal of Radiology
• /
• v.22 no.2
• /
• pp.168-178
• /
• 2021

Objective: To provide an automatic method for segmentation and diameter measurement of type B aortic dissection (TBAD). Materials and Methods: Aortic computed tomography angiographic images from 139 patients with TBAD were consecutively collected. We implemented a deep learning method based on a three-dimensional (3D) deep convolutional neural (CNN) network, which realizes automatic segmentation and measurement of the entire aorta (EA), true lumen (TL), and false lumen (FL). The accuracy, stability, and measurement time were compared between deep learning and manual methods. The intra- and inter-observer reproducibility of the manual method was also evaluated. Results: The mean dice coefficient scores were 0.958, 0.961, and 0.932 for EA, TL, and FL, respectively. There was a linear relationship between the reference standard and measurement by the manual and deep learning method (r = 0.964 and 0.991, respectively). The average measurement error of the deep learning method was less than that of the manual method (EA, 1.64% vs. 4.13%; TL, 2.46% vs. 11.67%; FL, 2.50% vs. 8.02%). Bland-Altman plots revealed that the deviations of the diameters between the deep learning method and the reference standard were -0.042 mm (-3.412 to 3.330 mm), -0.376 mm (-3.328 to 2.577 mm), and 0.026 mm (-3.040 to 3.092 mm) for EA, TL, and FL, respectively. For the manual method, the corresponding deviations were -0.166 mm (-1.419 to 1.086 mm), -0.050 mm (-0.970 to 1.070 mm), and -0.085 mm (-1.010 to 0.084 mm). Intra- and inter-observer differences were found in measurements with the manual method, but not with the deep learning method. The measurement time with the deep learning method was markedly shorter than with the manual method (21.7 ± 1.1 vs. 82.5 ± 16.1 minutes, p < 0.001). Conclusion: The performance of efficient segmentation and diameter measurement of TBADs based on the 3D deep CNN was both accurate and stable. This method is promising for evaluating aortic morphology automatically and alleviating the workload of radiologists in the near future.

• ETRI Journal
• /
• v.37 no.2
• /
• pp.212-221
• /
• 2015

As the amount of re-sequencing genome data grows, minimizing the execution time of an analysis is required. For this purpose, recent computing systems have been adopting both high-performance coprocessors and host processors. However, there are few applications that efficiently utilize these heterogeneous computing resources. This problem equally refers to the work of single nucleotide polymorphism (SNP) detection, which is one of the bottlenecks in genome data processing. In this paper, we propose a method for speeding up an SNP detection by enhancing the utilization of heterogeneous computing resources often used in recent high-performance computing systems. Through the measurement of workload in the detection procedure, we divide the SNP detection into several task groups suitable for each computing resource. These task groups are scheduled using a window overlapping method. As a result, we improved upon the speedup achieved by previous open source applications by a magnitude of 10.