• 한국기계가공학회지
• /
• 제15권3호
• /
• pp.1-7
• /
• 2016

The cutting processes used for monitoring engineering includes analysis and feedback about strange conditions, tools collision and tools wear in real time, for improving the working ratio of equipment and productivity. In this study, we proposed monitoring using profibus to increase the reliability as the most important factor for cutting monitoring. The profibus can increase the reliability of cutting monitoring for cutting torque of a main spindle motor and a feed motors through PLC-based interface.

• 한국공작기계학회논문집
• /
• 제15권1호
• /
• pp.1-7
• /
• 2006

A method of the volumetric error measurement and calibration of NC machine tools is studied using an artifact method. In this study, a hole-pate is designed and machined using stainless steel. We tested and applied the hole-plate artifact in a commercial CMM(Coordinate Measuring Machine), after calibration of the hole-plate using a precise CMM. It has been shown that not only the measurement of geometric error components but also the 2D length error calculation in a working volume is available using the hole-pate artifact method. The results of study can also be used in NC machine with touch probe as the same method in CMM.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 춘계학술대회 논문집 전기설비전문위원
• /
• pp.5-7
• /
• 2006

In this paper, developed a uninterruptible hotline tools and method for replacement of strain pole crossarm on overhead distribution line. For practical use of developed tools, following direct hot-line methods were proposed: 'Direct hot-lire method for replacement of pin pole crossarm', 'Direct hot-line method for alteration of crossarm' and 'Crossarm replacement method in uninterruptible cable displacement area'. These methods were proposed more simple and safe working on hotline job.

• 한국멀티미디어학회논문지
• /
• 제19권7호
• /
• pp.1208-1215
• /
• 2016

This study suggests efficient production of game with spine tool that is 2D game tool. For this, the researcher studies process and efficiency of game development by focusing on production of a game "Shooting Monster" Version 1 in service of Google Store at present. Production tools in a contents field are sharply changed. In addition, these tools are automatized into new version and efficient product. These tools help manufacturers in increasing quality of contents and time efficiency. Therefore, the researcher examines understanding of development process of existing 2D game and problems in development stage of graphic character, and analyzes production stage of character animation using spine tool, so suggests effective process of production in terms of production. The purpose of this study is to suggest the direction about graphic efficiency of tool by accessing production process to train working-level talented people in 2D mobile game field.

• 한국소음진동공학회논문집
• /
• 제20권10호
• /
• pp.891-899
• /
• 2010

Since the working machine generates an excessive loud noise as much as its use-purpose and dimension, those damages are occurring to the exposed workers such as unpleasant sense, stress and occupational hearing-impaired. Accordingly, as one of the measures for prevention such loud noise, various soundproof protection tools were developed. However, such soundproof protection tools were presented the physical measured value only, it is real state that the psychological study result with regard to the soundproof effect which the workers are actually feeling, is not existing. On such point of view, with the object on the typical earplugs and earcaps among the soundproof protection tools, this study has ever tried a subjective evaluation about the degree of soundproof effect through Psycho-acoustics experiment. It is considering that such study result could be utilized as the useful material when establishing the soundproof measure for the workers in the future.

• International Journal of Computer Science & Network Security
• /
• 제21권1호
• /
• pp.162-173
• /
• 2021

The Honeypot is the mechanism that is made to learn more about the attackers like knowing about the method and pattern of attack and is also used to obtain very useful info about all intrusive activities. Honeypots usually categorized according to the interaction's level as (high, medium, low) interaction. The main purpose which is used as honey production and honey research. This paper includes a detailed study of two honeypot tools. The different honey pot findings are put in in this paper to illustrate how honey is working in a real environment and even how it reacts when undesirable interest obtain in this network, and these tools are used to improve the concept of security, protection and confidentiality within or outside the organization to avoid attacks, vulnerabilities and breaches.

• 대한가정학회지
• /
• 제40권9호
• /
• pp.127-141
• /
• 2002

This research aims to examine the influence of facilitative communication between mother and high school daughter on daughter's perceived family cohesion, family adaptability, and satisfaction of mother's working or non-working status. In order to verify statistically the research questions above, experimental tools were made for each variable, and Cluster Sampling with Stratification was conducted among high school girls in Seoul. A total of 670 questionnaire sheets were administered to 13 high schools for girls in December 2001, and only 501 sheets were used for data analysis. The SPSS 10.0 package was used for factor analysis, reliability analysis, multiple regression analysis. The following results were obtained: 1) Mother-high school daughter's facilitative communication significantly influences daughter's perceived family cohesion. In general, mother-high school daughter's facilitative communication had R square of 27.6% with regards to daughter's perceived family cohesion. 2) Mother-high school daughter's facilitative communication significantly influences daughter's perceived family adaptability. In general, mother-high school daughter's facilitative communication had R square of 25.3% with regards to daughter's perceived family adaptability. 3) Mother-high school daughter's facilitative communication significantly influences daughter's perceived satisfaction of mother's working of non-working status. In general, mother-high school daughter's facilitative communication had R square of 24.0% with regards to daughter's perceived satisfaction of mother's working status, and 7.4% with regards to non-working status.

• 한국안전학회지
• /
• 제14권4호
• /
• pp.192-198
• /
• 1999

Work-related musculoskeletal disorders constitute a major source of employee disability and lost wages. Cumulative Trauma Disorders(CTD) refers to a category of physical conditions which result from chronic musculoskeletal injury. Assessment of CTD risk in industry at early stage allows for early control, a safe environment, and a healthier workforce. In this study, the physical load of the shipping work in the cold storage warehouse were especially investigated. Employees were working with almost unnatural posture in a very restricted work space. The questionnaire and biomechanical analysis were used to evaluate the physical load. Results from analyses showed that they were sufficiently exposed to CTD due to repetition and unnatural posture. Based on the analysis, ways for improving working conditions are proposed. The analysis and proposals in this paper will serve as a basic tool for designing/redesigning working environment such as improvement of tools and equipments, design of times for work/rest cycle.

• 한국정밀공학회지
• /
• 제21권9호
• /
• pp.174-181
• /
• 2004

Recently, many studies have been undergoing to reduce working time in field of machine tool. There are two ways of reducing working time to reduce actual working time by heighten spindle speed and to reduce stand-by time by shortening tool exchange time. Auto tool changer belongs to latter case. Fixed address type auto tool changer can store more number of tools in small space than magazine transfer Ope and can shorten tool exchange time. This study focuses on the topology optimization to reduce the weight of the fixed address type ATC. The optimization program using a real number coding genetic algorithm is developed and is applied to the 10-bar truss optimization problem to verify the developed program. And, it is shown that the developed program gives better results than other methods. Finally, The developed program applied to optimize the fixed address type ATC.

• 한국기계가공학회지
• /
• 제4권2호
• /
• pp.16-23
• /
• 2005

This study is intended to find out the reason of interference phenomenon of a machine tool when it operates for 5-axises working. The researcher made a Virtual Machine which has same figures of the 5 axises machine tool and Virtual Manufacturing System which has both Software factors - controller and NC code data to manipulate the movement characteristics of the machine - and Hardware factors - fixtures, workpiece, tools, holders and so on. With these virtual tools, this study is designed to find out the relation between the movement and the interference or collision, and also intended to verify the simulation and work-processing. In this study, the researcher found out, in case of the vertical 5 axises type, that it has more chances to have interference between the fixture, the workpiece and the main spindle including the tool holder due to the tilting kinetics of the main spindle. In case of the horizontal 5 axises type, on the other hand, the researcher found out that it has more possibility to have the interference between the main spindle and the rotary shaft.