Journal of the Korean Society of Manufacturing Process Engineers (한국기계가공학회지)

The Korean Society of Manufacturing Process Engineers (한국기계가공학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on Real Time Cutting Monitoring using Profibus

프로피버스 통신을 이용한 실시간 절삭 상태 모니터링에 관한 연구

  • Yoon, Sang-Hwan (School of Mechanical and Aerospace Engineering, ReCAPT, Gyeongsang National University) ;
  • Cho, Sang-pil (School of Mechanical and Aerospace Engineering, ReCAPT, Gyeongsang National University) ;
  • Lyu, Sung-gi (School of Mechanical and Aerospace Engineering, ReCAPT, Gyeongsang National University)
  • 윤상환 (경상대학교 대학원 기계항공공학부, 항공연) ;
  • 조상필 (경상대학교 대학원 기계항공공학부, 항공연) ;
  • 류성기 (경상대학교 대학원 기계항공공학부, 항공연)
  • Received : 2016.04.11
  • Accepted : 2016.04.29
  • Published : 2016.06.30
Download PDF
⟨ Previous Next ⟩

Abstract

The cutting processes used for monitoring engineering includes analysis and feedback about strange conditions, tools collision and tools wear in real time, for improving the working ratio of equipment and productivity. In this study, we proposed monitoring using profibus to increase the reliability as the most important factor for cutting monitoring. The profibus can increase the reliability of cutting monitoring for cutting torque of a main spindle motor and a feed motors through PLC-based interface.

Keywords

References

  1. Hong. I. J., Speed Sensorless Torque Monitoring of Induction Spindle Motor on CNC Lathe using Internet, A master's thesis of The University of Seoul, Republic of Korea. 2003,
  2. Choi. D., Kwon. W. T., and Chu. C. N., "Real-time Monitoring of Tool Fracture in Turning using Sensor Fusion," The International Journal of Advanced Manufacturing Technology, Vol. 15, pp. 305-310, 1999. https://doi.org/10.1007/s001700050071
  3. Hong. I. J. and Kwon. W. T., "Speed-sensorless Torque Monitoring on CNC Lathe using Internet," Journal of the Korean Society of Precision Engineering, Vol. 21. No. 5, pp. 99-105, 2004.
  4. Hong. I. J. and Kwon. W. T., "Speed Sensorless Torque Monitoring During Machining on CNC Lathe," TTransactions of the Korean Society of Mechanical Engineers A, Vol. 28. No. 3, pp. 222-229, 2004. https://doi.org/10.3795/KSME-A.2004.28.3.222
  5. Yang J. Y., Yoon M. C., and Kim B. T., "Dynamic and Static End-milling Force Analysis According to Workpiece Geometry", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 11. No. 4, pp. 13-19, 2012.
  6. Mannan, M. A., Broms, S., and Lindstrom, B., "Monitoring and Adaptive Control of Cutting Process by Means of Motor Power and Current Measurement," CIRP Annals-Manufacturing Technology, Vol. 38, pp. 347-350, 1989. https://doi.org/10.1016/S0007-8506(07)62720-6
  7. An, Y. J. and Kim, J. Y., "A Study on Real-time Tool Breakage Monitoring on CNC Lathe using Fusion Sensor," Journal of the Korean Society of Tribologists and Lubrication Engineers, Vol. 28, No. 3, pp. 130-135, 2012. https://doi.org/10.9725/kstle.2012.28.3.130
  8. Jeong, Y. H., "Tool Breakage Detection Using Feed Motor Current," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 6, pp. 1-6, 2015.

Cited by

  1. Simulation Analysis of Flexible Track Drilling Machines Based on ADAMS vol.17, pp.5, 2018, https://doi.org/10.14775/ksmpe.2018.17.5.001
  2. A Study on Monitoring Drilling using Torque from Main Spindle Based on PLC in CNC Machine Tools vol.17, pp.3, 2018, https://doi.org/10.14775/ksmpe.2018.17.3.007