• 제목/요약/키워드: working gas

검색결과 704건 처리시간 0.025초

Measurement and analysis of tractor emission during plow tillage operation

  • Jun-Ho Lee;Hyeon-Ho Jeon;Seung-Min Baek;Seung-Yun Baek;Wan-Soo Kim;Yong-Joo Kim;Ryu-Gap Lim
    • 농업과학연구
    • /
    • 제50권3호
    • /
    • pp.383-394
    • /
    • 2023
  • In Korea, the U.S. Tier-4 Final emission standards have been applied to agricultural machinery since 2015. This study was conducted to analyze the emission characteristics of agricultural tractors during plow tillage operations using PEMS (portable emissions measurement systems). The tractor working speed was set as M2 (5.95 km/h) and M3 (7.60 km/h), which was the most used gear stage during plow tillage operation. An engine idling test was conducted before the plow tillage operation was conducted because the level of emissions differed depending on the temperature of the engine (cold and hot states). The estimated level of emissions for the regular area (660 m2), which was the typical area of cultivation, was based on an implement width of 2.15 m and distance from the work area of 2.2 m. As a result, average emission of CO (carbon monoxide), THC (total hydrocarbons), NOx (nitric oxides), and PM (particulate matter) were approximately 6.17×10-2, 3.36×10-4, 2.01×10-4, and 6.85×10-6 g/s, respectively. Based on the regular area, the total emission of CO, THC, NOx, and PM was 2.62, 3.76×10-2, 1.63, and 2.59×10-4 g, respectively. The results of total emission during plow tillage were compared to Tier 4 emission regulation limits. Tier 4 emission regulation limits means maximum value of the emission per consumption power (g/kWh), calculated as ratio of the emission and consumption power. Therefore, the total emission was converted to the emission per power using the rated power of the tractor. The emission per power was found to be satisfied below Tier 4 emission regulation limits for each emission gas. It is necessary to measure data by applying various test modes in the future and utilize them to calculate emission because the emission depends on various variables such as measurement environment and test mode.

γ-FIB 시스템을 이용한 산소 유량 변화에 따른 산화인듐주석 박막의 특성 연구 (Properties of Indium Tin Oxide Thin Films According to Oxygen Flow Rates by γ-FIB System)

  • 김동해;손찬희;윤명수;이경애;조태훈;서일원;엄환섭;김인태;최은하;조광섭;권기청
    • 한국진공학회지
    • /
    • 제21권6호
    • /
    • pp.333-341
    • /
    • 2012
  • 본 연구는 RF 마그네트론 스퍼터링법을 이용하여 산소유량 변화에 따라 증착된 ITO 박막 구조적, 전기적, 광학적 특성을 분석하였다. ITO (Indium Tin Oxide) 박막은 $1.0{\times}10^{-3}$ Torr의 공정 압력과 2 kW 및 13.56 MHz의 RF 전력, 1,000 sccm의 Ar 가스 조건하에 0~12 sccm의 $O_2$ 가스 유량을 변경하면서 증착하였다. 광투과율 측정은 적분구를 이용하였으며, 측정 파장 범위는 300~1,100 nm이다. 4-point probe를 이용하여 면저항을 측정하였으며, Hall Measurement System을 이용하여 비저항, 캐리어 농도 및 전자이동도를 측정하였다. Scanning electron microscope 장비를 이용하여 ITO 박막 표면을 분석하였고, 박막의 거칠기는 Atomic force microscope을 이용하여 측정하였다. ${\gamma}$-Focused ion beam system을 이용하여 ITO 박막의 이차전자방출계수를 측정하였으며, 이차전자방출계수 값으로 Auger neutralization mechanism 분석법을 이용해 ITO 박막의 일함수를 결정하였다. 3 sccm의 산소 유량에서 증착된 ITO 박막의 비저항은 약 $2.4{\times}10^{-4}{\Omega}{\cdot}cm$로 가장 좋았으며, 광학적 특성 또한 84.93% (Weighted average)로 가장 좋은 것을 확인할 수 있었다. 이 조건에서 이차전자방출 계수가 가장 높았고 일함수는 가장 낮은 경향의 일치함을 확인하였다.

Wearable Computers

  • Cho, Gil-Soo;Barfield, Woodrow;Baird, Kevin
    • 섬유기술과 산업
    • /
    • 제2권4호
    • /
    • pp.490-508
    • /
    • 1998
  • One of the latest fields of research in the area of output devices is tactual display devices [13,31]. These tactual or haptic devices allow the user to receive haptic feedback output from a variety of sources. This allows the user to actually feel virtual objects and manipulate them by touch. This is an emerging technology and will be instrumental in enhancing the realism of wearable augmented environments for certain applications. Tactual displays have previously been used for scientific visualization in virtual environments by chemists and engineers to improve perception and understanding of force fields and of world models populated with the impenetrable. In addition to tactual displays, the use of wearable audio displays that allow sound to be spatialized are being developed. With wearable computers, designers will soon be able to pair spatialized sound to virtual representations of objects when appropriate to make the wearable computer experience even more realistic to the user. Furthermore, as the number and complexity of wearable computing applications continues to grow, there will be increasing needs for systems that are faster, lighter, and have higher resolution displays. Better networking technology will also need to be developed to allow all users of wearable computers to have high bandwidth connections for real time information gathering and collaboration. In addition to the technology advances that make users need to wear computers in everyday life, there is also the desire to have users want to wear their computers. In order to do this, wearable computing needs to be unobtrusive and socially acceptable. By making wearables smaller and lighter, or actually embedding them in clothing, users can conceal them easily and wear them comfortably. The military is currently working on the development of the Personal Information Carrier (PIC) or digital dog tag. The PIC is a small electronic storage device containing medical information about the wearer. While old military dog tags contained only 5 lines of information, the digital tags may contain volumes of multi-media information including medical history, X-rays, and cardiograms. Using hand held devices in the field, medics would be able to call this information up in real time for better treatment. A fully functional transmittable device is still years off, but this technology once developed in the military, could be adapted tp civilian users and provide ant information, medical or otherwise, in a portable, not obstructive, and fashionable way. Another future device that could increase safety and well being of its users is the nose on-a-chip developed by the Oak Ridge National Lab in Tennessee. This tiny digital silicon chip about the size of a dime, is capable of 'smelling' natural gas leaks in stoves, heaters, and other appliances. It can also detect dangerous levels of carbon monoxide. This device can also be configured to notify the fire department when a leak is detected. This nose chip should be commercially available within 2 years, and is inexpensive, requires low power, and is very sensitive. Along with gas detection capabilities, this device may someday also be configured to detect smoke and other harmful gases. By embedding this chip into workers uniforms, name tags, etc., this could be a lifesaving computational accessory. In addition to the future safety technology soon to be available as accessories are devices that are for entertainment and security. The LCI computer group is developing a Smartpen, that electronically verifies a user's signature. With the increase in credit card use and the rise in forgeries, is the need for commercial industries to constantly verify signatures. This Smartpen writes like a normal pen but uses sensors to detect the motion of the pen as the user signs their name to authenticate the signature. This computational accessory should be available in 1999, and would bring increased peace of mind to consumers and vendors alike. In the entertainment domain, Panasonic is creating the first portable hand-held DVD player. This device weight less than 3 pounds and has a screen about 6' across. The color LCD has the same 16:9 aspect ratio of a cinema screen and supports a high resolution of 280,000 pixels and stereo sound. The player can play standard DVD movies and has a hour battery life for mobile use. To summarize, in this paper we presented concepts related to the design and use of wearable computers with extensions to smart spaces. For some time, researchers in telerobotics have used computer graphics to enhance remote scenes. Recent advances in augmented reality displays make it possible to enhance the user's local environment with 'information'. As shown in this paper, there are many application areas for this technology such as medicine, manufacturing, training, and recreation. Wearable computers allow a much closer association of information with the user. By embedding sensors in the wearable to allow it to see what the user sees, hear what the user hears, sense the user's physical state, and analyze what the user is typing, an intelligent agent may be able to analyze what the user is doing and try to predict the resources he will need next or in the near future. Using this information, the agent may download files, reserve communications bandwidth, post reminders, or automatically send updates to colleagues to help facilitate the user's daily interactions. This intelligent wearable computer would be able to act as a personal assistant, who is always around, knows the user's personal preferences and tastes, and tries to streamline interactions with the rest of the world.

  • PDF

바이오 연료 적용에 따른 차량 증발가스 및 성능특성 연구 (The Characteristics Study of Vehicle Evaporative Emission and Performance according to the Bio-Fuel Application)

  • 노경하;이민호;김기호;김신;박천규
    • 한국응용과학기술학회지
    • /
    • 제34권4호
    • /
    • pp.874-882
    • /
    • 2017
  • 국내 외에서 대기오염에 대한 관심이 점점 증가함에 따라 자동차 및 연료관련 분야의 연구자들은 새로운 엔진설계, 향상된 후처리장치, 청정연료 그리고 연료품질향상을 통해 자동차의 배출가스 감소를 위하여 지속적으로 노력해 왔다. 따라서, 본 연구에서는 자동차의 증발가스와 성능, 환경성에 대해 살펴보고자 하였으며, 연료의 옥탄가 향상제로 쓰이는 바이오 에탄올, 바이오 부탄올, 바이오 ETBE (Ethyl Tertia ry Butyl Ether), MTBE (Methyl Tertiary Butyl Ether)가 환경에 미치는 문제점에 대해 살펴보고자 하였다. 주로 휘발유의 옥탄가 향상제로 쓰이는 바이오 에탄올, 바이오 부탄올, 바이오 ETBE, MTBE가 휘발유 연료 특성 중 증발가스에 미치는 영향에 대해 살펴보았으며, 바이오 연료 특성에 대한 가솔린 자동차의 가속 및 동력 성능을 살펴보았다. 실험결과 증발가스는 최대 1.04g/test로 모든 시험 연료가 국내 배출가스 기준에 부합함을 알 수 있었으며, 원료에 대한 증기압 측정 결과 바이오에탄올 15kPa, 바이오 부탄올 1.6k Pa로 E3급 연료 제조 시 바이오 부탄올 함유량을 늘리면 증기압과 증발가스 또한 낮게 나타났다. 또한, 바이오 연료의 종류에 따라 유사한 가속 및 동력 성능을 나타내었으며, 바이오 부탄올과 바이오 에탄올 비교시 가속 성능이 약 3.9%, 출력은 0.8% 개선되었다.

공기조화, 냉동 분야의 최근 연구 동향 -2000년 및 2001년 학회지 논문에 대한 종합적 고찰 - (Recent Progress in Air Conditioning and Refrigeration Research -A Review of Papers Published in the Korean Journal of Air-Conditioning and Refrigeration Engineering in 2000 and 2001-)

  • 강신형;한화택;조금남;이승복;조형희;김민수
    • 설비공학논문집
    • /
    • 제14권12호
    • /
    • pp.1102-1139
    • /
    • 2002
  • A review on the papers published in the Korean Journal of Air-Conditioning and Refrigerating Engineering in 2000 and 2001 has been done. Focus has been put on current status of research in the aspect of heating, cooling, ventilation, sanitation and building environment. The conclusions are as follows. (1) Most of fundamental studies on fluid flow were related with heat transportation of facilities. Drop formation and rivulet flow on solid surfaces were interesting topics related with condensation augmentation. Research on micro environment considering flow, heat, humidity was also interesting for comfortable living environment. It can be extended considering biological aspects. Development of fans and blowers of high performance and low noise were continuing topics. Well developed CFD technologies were widely applied for developing facilities and their systems. (2) Most of papers related with heat transfer analysis and heat exchanger shows dealt with convection, evaporation, and channel flow for the design application of heat exchanger. The numerical heat transfer simulation studies have been peformed and reported to show heat transfer characteristics. Experimental as well as numerical studies on heat exchanger were reported, while not many papers are available for the system analysis including heat exchanger. (3) A review of the recent studies on heat pump system shows that performance analysis and control of heat pump have been peformed by various simulations and experiments. The research papers on multi-type heat pump system increased significantly. The studies on heat pipe have been examined experimently for change of working characteristics and strut lure. Research on the phase change has been carried out steadily and operation strategies of encapsulated ice storage tank are reported experimentally in several papers. (4) A review of recent studies on refrigeration/air conditioning system have focused on the system performance and efficiency for new alternative refrigerants. Evaporation and condensation heat transfer characteristics are investigated for tube shapes and new alternative refrigerants. Studies on components of refrigeration/air conditioning system are carried to examine efficiency for various compressors and performance of new expansion devices. In addition to thermophysical properties of refrigerant mixtures, studies on new refrigerants are also carried out, however research works on two-phase flow seemed to be insufficient. (5) A review of the recent studies on absorption cooling system indicates that heat and mass transfer phenomena have been investigated to improve absorber performance. Various experimental data have been presented and several simulation models have been proposed. A review of the recent studies on duct and ventilation shows that ventilation indices have been proposed to quantify the ventilation performance in buildings and tunnels. Main efforts have been focused on the applications of ventilation effectiveness in practice, either numerically using computational fluid dynamics or experimentally using tracer gas techniques. (6) Based on a review of recent studies on indoor thermal environment and building service systems, research issues have mainly focused on many innovative ideas such as underfloor air-conditioning system, personal environmental modules, radiant floor cooling and etc. Also, the new approaches for minimizing energy consumption as well as improving indoor environmental conditions through predictive control of HVAC systems, various activities of building energy management and cost-benefit analysis for economic evaluation were highlighted.

전과정평가를 이용한 유채재배의 환경영향 평가 (Environmental Impact Assessment of Rapeseed Cultivation by Life Cycle Assessment)

  • 홍승길;남재작;신중두;옥용식;최봉수;양재의;김정규;이성은
    • 한국환경농학회지
    • /
    • 제30권1호
    • /
    • pp.24-30
    • /
    • 2011
  • 유채 재배 전과정이 환경에 미치는 영향을 전과정평가 기법으로 분석하였다. 유채재배 과정을 평가하기 위해 비료, 농약, 농기계 사용에 따른 에너지 소비량, 작업시간 등을 조사하여 평가의 기능 단위인 유채 1톤을 기준으로 분석하였다. Eco-Indicator 95방법으로 8개 영향범주에 대해 전과정영향을 평가한 결과 유채 1톤을 생산하는데 온실가스 216 kg $CO_2$-eq., 오존층 고갈 3.98E-05 kg CFC-11-eq., 산성화 1.78 kg $SO_2$-eq., 부영양화 0.28 kg $PO_4$-eq., 중금속 5.23E-03 kg Pb-eq., 발암 물질 2.51E-05 kg B(a)p-eq., 스모그 1.24 kg SPM-eq., 에너지자원 6,460 MJ LHV의 영향을 미치는 것으로 나타났다. 이 중 90%가 화학비료에서 기인하는 것으로 분석되었다. 유채 생산량이 1 톤 증가하였을 경우에 대한 민감도 분석에서는 배출량은 동일하였으나 단위 면적당 생산량이 증가하여 유채 1톤에 대한 환경 부하는 22% 감소하는 것으로 평가되었다. 따라서 친환경농업 또는 자원순환농업을 통하여 화학비료의 사용량을 줄이면 유채 재배에 있어 농업부문 온실가스 배출량이 상당부분 감소될 것으로 판단되었다.

동방결절 활동전압에 대한 아데노신 효과 (Effects of Adenosine on the Action Potentials of Rabbit SA Nodal Cells)

  • 김기환;호원경
    • The Korean Journal of Physiology
    • /
    • 제18권1호
    • /
    • pp.19-35
    • /
    • 1984
  • Since the first report of Drury and $Szent-Gy{\ddot{o}}rgyi$ in 1929, the inhibitory influences of adenosine on the heart have repeatedly been described by many investigators. These studies have shown that adenosine and adenine nucleotides have overall depressant effects, similar to those of acetylcholine. Heart beats become slow and weak. It is also well known that adenosine is a potent endogenous coronary vasodilator. Many investigations on the working mechanisms of adenosine have been focused mainly on the effects of the coronary blood flow. However, the cellular mechanisms underlying the inhibitory action of adenosine on sinus node are not well understood yet. Thus, this study was undertaken to examine the behavior of rabbit SA node under influence of adenosine. In these series of experiments three kinds of preparations were used: whole atrial pair, left atrial strip, and isolated SA node preparations. The electrical activity of SA node was recorded with conventional glass microelectrodes 30 to 50 $M{\Omega}$. The preparations were superfused with bicarbonate-buffered Tyrode solution of pH 7.35 and aerated with a gas mixture of $3%\;CO_2-97%\;O_2$ at $35^{\circ}C$. In whole atrial pair, adenosine suppressed sinoatrial rhythm in a dose-dependent manner. Effect of adenosine on atrial rate appeared at the concentration of $10^{-5}M$ and was enhanced in parallel with the increase in adenosine concentration. Inhibitory action of adenosine on pacemaker activity was more prominent in the preparation pretreated with norepinephrine, which can steepen the slope of pacemaker potential by increasing permeability of $Ca^{+2}$. Calcium ions in perfusate slowly produced a marked change in sinoatrial rhythm. Elevation of the calcium concentration from 0.3 to 8 mM increased the atrial rate from 132 to 174 beats/min, but over 10 mM $Ca^{+2}$ decreased. The inhibitory effect of adenosine on sinoatrial rhythm developed very rapidly. Atrial rate was recovered promptly from the adenosine-induced suppression by the addition of norepinephrine, but extra $Ca^{+2}$ was less suitable to restore the suppression of atrial rate. Adenosine suppressed also atrial contractility in the same dosage range that restricted pacemaker activity, even in the reserpinized preparation. In isolated SA node preparation, spontaneous firing rate of SA node at $35^{\circ}C$(mean{\pm}SEM, n=16) was $154{\pm}3.3\;beats/min. The parameters of action potentials were: maximum diastolic potential(MDP), $-73{\pm}1.7\;mV: overshoot(OS), $9{\pm}1.4\;mV: slope of pacemaker potential(SPP), $94{\pm}3.0\;mV/sec. Adenosine suppressed the firing rate of SA node in a dose-dependent manner. This inhibitory effect appeared at the concentration of $10^{-6}M$ and was in parallel with the increase in adenosine concentration. Changes in action potential by adenosine were dose-dependent increase of MDP and decrease of SPP until $10^{-4}M$. Above this concentration, however, the amplitude of action potential decreased markedly due to the simultaneous decrease of both MDP and OS. All these effects of adenosine were not affected by pretreatment of atropine and propranolol. Lowering extra $Ca^{2+}$ irom 2 mM to 0.3 mM resulted in a marked decrease of OS and SPP, but almost no change of MDP. However, increase of perfusate $Ca^{2+}$ from 2 mM to 6 or 8 mM produced a prominent decrease of MDP and a slight increase of OS and SPP. Dipyridamole(DPM), which is known to block the adenosine transport across the cell membrane, definately potentiated the action of adenosine. The results of this experiment suggest that adenosine suppressed pacemaker activity and atrial contractility simultaneously and directly, by decreasing $Ca^{2+}-permeability$ of nodal and atrial cell membranes.

  • PDF

지하공동구 화재 실험 및 시뮬레이션에 의한 화재 설칠 예측 평가 (Estimation of fire Experiment Prediction by Utility Tunnels Fire Experiment and Simulation)

  • 윤명오;고재선;박형주;박성은
    • 한국화재소방학회논문지
    • /
    • 제15권1호
    • /
    • pp.23-33
    • /
    • 2001
  • 지하공동구는 최근 통신의 발달로 인해 국가 중추기능으로서의 주요 역할을 하는 시설로, 사고시 신속한 대처가 힘들고 케이블 연소시 발생하는 유독가스에 의한 검은 연기로 공동구 내에 진입하여 소화화기가 힘들다. 따라서, 화재발생시 막대한 재산피해 및 통신의 두절 등 국가의 중추신경이 마비됨은 물론 시민 불편사항을 초래시켰다. 본 논문은 지금까지 발생되어온 공동구 화제를 바탕으로 실제 공동구 모형을 제작하여 화재를 재현함으로서, 과학적으로 화재의 성상을 분석하고 지하공동구 내에 소방설비를 갖춘 후에 일정온도에서 각각의 소방설비들이 제대로 작동하는지를 검증하는데 그 목적이 있다. 화재실험은 지하 공동구 내에 정온식 감지선형 감지기, 방화문, 연결살수설비 및 환기설비를 설치하고 송.배전케이블은 일정구간 내화도료로 도장하며 난방관은 내화피복된 상태에서 실험하였다. 그 결과 최고 온도가 $932^{\circ}c$로 측정되었고 일정온도에서 정온식 감지선형 감지기가 작동하여 화재위치를 정확히 수신반에 나타내었다. 그리고 송.배전케이블은 일정구간 내화도료로 도장한 것은 내화성능이 없는 것으로 나타났고, 내화피복된 난방관은 약 30분 정도의 내화 성능이 있는 것으로 나타났다. 컴퓨터 화재 시뮬레이션은 실제 화재 시험시의 화재하중을 입력하여 실시한 결과 최고 온도가 $943^{\circ}c$로 실제 화재시의 최고 온도인 $932^{\circ}c$와 거의 일치하였다. 따라서 공동구 화재하중만으로 화재 시뮬레이션을 실시하여 화재의 성상에 대한 예측이 가능한 것으로 판단되며 시뮬레이션으로 얻는 열방출량, 연기층의 높이, 산소, 일산화탄소, 이산화탄소의 농도 등의 결과 값들을 실제 화재 실험시의 값으로 적용시킬 수 있는 것으로 판단된다. 0.05ppb보다 높은 수준으로 예측되어 유럽의 허용기준치를 초과하는 것으로 나타났다.확보를 위한 위생관리 업무 향상을 위해서는 본 연구에서 가장 취약한 부분으로 드러난 시설 및 기기들을 우선 보완해야 할 것으로 사료된다.ons. Specific growth rate of dechlorinators showed little difference between the slurry and the low-moisture sediments; however, growth yield was high in the sediments of reduced moisture content. The reduction of sediment moisture decreased the dechlorination rate and extent of PCBs but did not inhibit the growth of PCB dechlorinators.1.4mg, 여학생이 159.3mg이었다. 이상의 결과로 보아 에너지, 단백질, 칼슘, 비타민 A 등 대부분의 영양소 섭취량이 권장량에 미치지 못하여 성장기에 있는 아동들의 영양소 섭취 상태에 문제가 있음을 시사해 주었다. 5. 조사 대상자의 식습관과 영양소 섭취량의 상관관관계는 식사 시간의 규칙성은 단백질, 식이성 섬유소, 비타민 A 및 티아민섭취량과 양의 상관을 나트륨섭취량과는 음의 상관관계가 있었다. 음식의 간(염도)은 인과 콜레스테롤 섭취와 음의 상관관계를 나타냈다. 들깨가루나 들기름 사용 여부는 열량, 탄수화물 및 인의 섭취량과 음의 상관을, 지방, 철분, 리보플라빈 및 나이아신섭취량과는 양의 상관관계를 나타냈었다. 결식여부는 지방, 철분 및 나이아신섭취량과는 양의 상관관계를, 열량, 탄수화물, 인 나트륨, 및 콜레스테롤섭취량과는 음의 상관을 보였다. 외식이

  • PDF

지하에 위치한 방사선종양학과에서의 실내공기 질 평가 (Evaluation of Indoor Air Quality in a Department of Radiation Oncology Located Underground)

  • 김원택;신용철;강동묵;기용간;김동원;권병현
    • Radiation Oncology Journal
    • /
    • 제23권4호
    • /
    • pp.243-252
    • /
    • 2005
  • 목적: 지하에 위치한 방사선치료 관련시설 내의 실내공기 질은 근무자뿐만 아니라 장기간 치료받는 환자들의 건강에도 중요하다. 저자들은 근무자들의 빌딩증후군 증상유무의 확인과 함께 실내공기 질과 관련된 여러 인자들을 측정, 분석하여 그 원인을 찾고 해결책을 제시하고자 하였다. 대상 및 방법: 근무자들을 대상으로 자각증상 및 근무환경 인식과 관련된 설문조사를 하였고, 예비조사를 바탕으로 실내공기 질과 관련된 항목들(온 습도, 미세먼지, 이산화탄소, 일산화탄소, 포름알데히드, 총휘발성유기화합물, 라돈)에 대해 근무자들이 주로 머무르는 지역들을 중심으로 일정기간 측정하였다. 아울러 환기(공조) 시스템의 효율 및 주변 환경에 대한 평가를 동시에 진행하였으며, 실외공기와의 비교평가를 위해 1층(실외)에서도 같은 항목들을 측정하였고, 측정 자료들은 국내외 환경관련 기관들의 권고 수치를 기준으로 각각 평가하였다. 결과: 설문조사에서 근무자들은 악취, 습도, 먼지 등에 대해 불만족을 보였으며, 근골격계 증상, 신경계 증상, 점막 자극 증상 등을 주로 호소하였다. 대부분의 실내공기 질 관련 항목들은 기준치를 넘지 않았으나 총휘발성유기화합물 수치가 기존 미국 사무실 측정 수치에 비해 $3{\sim}4$배 높게 나왔다. 환기 횟수나 환기량에서는 문제가 없었으나 실외공기 유입구와 실내공기 배출구의 위치 문제로 인해 오염된 공기의 유입 가능성이 있었다. 총휘발성유기화합물을 배출할 수 있는 현상액과 같은 화학물질의 관리에 주의가 필요했으며, 오염된 공기의 재유입 문제를 해결하기 위해 환기 시스템의 위치조정이 시급한 상황이었다. 결론: 저자들은 실내공기 질에 대한 평가에서 일부 화학물질 및 부적절한 환기 시스템으로 인해 근무자들이 주관적인 증상을 호소할 수 있음을 확인하였다. 지하 공간에서 장시간 거주하는 근무자들의 근무여건 개선과 함께 면역저하를 동반한 환자들의 건강관리를 위해 실내공기 질에 대한 평가는 반드시 필요하며, 그 자료를 바탕으로 향후 방사선종양학과의 설계나 기존 시설의 환경개선 등에 적극적으로 이용해야 하겠다.

교반식 축분 퇴비화 및 톱밥 탈취처리 시스템의 퇴비화 암모니아 제거 성능 (Performance Characteristics of Agitated Bed Manure Composting and Ammonia Removal from Composting Using Sawdust Biofiltration System)

  • 홍지형;박금주
    • 한국축산시설환경학회지
    • /
    • 제13권1호
    • /
    • pp.13-20
    • /
    • 2007
  • 퇴비화 목적은 축분을 오물감과 악취 없이 살균처리 하고, 토양과 작물에 무해한 유기성 자원의 순환이용이다. 퇴비화 호기성 미생물의 이분해성 유기물 (영양원: 탄질비)분해 적정조건은 수분, 공기, 온도, 퇴비화 기간 등이며, 퇴비화 부숙 목적은 이분해성 유기물분해 및 생육저해 물질분해 등에 있다. 부숙도 판정법은 퇴적물의 온도변화(이분해성유기물분해 검사) 및 발아시험(생육저해물질 검사)등이 바람직하다. 본 연구는 퇴비화 온도, 퇴비화 암모니아가스 농도와 악취물질의 탈취처리, 종자 발아율, 퇴비재료 성분 및 EC 농도 등의 퇴비화 부숙도 주요 요인에 대한 3회 반복 실험성과는 다음과 같다. 본 연구결과로서 퇴비화 주발효 및 후숙 6주간 전반기에서 이분해성 유기물 분해와 취기물질 제거에 관련된 퇴비화 온도, 암모니아 농도, 탄질비 및 염류농도, 후반기 후숙 기간에 작물생육저해물질 제거에 연관된 발아율과 탄산가스 발생량 등을 실측조사 분석한 결과는 다음과 같으며, 안정된 숙성 퇴비의 적정 범위를 유지하여 양질 퇴비 생산이 가능하였다. 1. 축사저류조의 돼지배설물의 고액분리 고형분과 착즙액 정화처리 잉여오니 및 톱밥혼합물의 퇴비화 온도가 $55\sim65^{\circ}C$를 2일 이상 유지하여 병원균과 잡초 종자를 사멸하고, 악취가 미미한 44ppm 이하수준의 비교적 낮은 암모니아농도 및 50% 내외의 저수분의 양질 퇴비 생산이 가능하였다. 2. 퇴비화 실험결과는 퇴비화 온도가 $55\sim65^{\circ}C$로서 1주간 이상, 퇴비재료 수분 50%, 종자 발아율 70% 이상 및 EC농도 5ds/m 이하 등의 수준을 유지하고 있어 완숙퇴비 조건을 구비하고 있었다.상관관계가 비교적 높았으나, 음수량과 분 배설량$(R^2=0.2950)$, 사료 섭취량과 뇨 배설량$(R^2=0.1985)$, 산유량과 뇨 배설량$(R^2=0.2335)$의 상관관계는 낮게 나타났다. 6. 따라서 산유량과 음수량, 산유량과 사료 섭취량의 상관관계식은 $Y=0.1919X_1+11.181(R^2=0.7742),\;Y=0.8568X_2+9.3067(R^2=0.7459)$(Y=milk yield $X_1=water$ consumption, $X_2=feed$ intake)로 추정할 수 있다.. 이상(以上)의 결과(結果)로서 통일(統一)벼가 일반품종(一般品種)에 비(比)하여 저장성(貯藏性)이 우수(優秀)함을 인정(認定)할수 있어 장기저장(長期貯藏)을 위(爲)한 미곡(米穀)으로 활용(活用)할 수 있는 가능성(可能性)을 암시(暗示)하고 있다.록 Lact. plantarum ATCC 8014, Lact. fermenti ATCC 9338균주(菌株)의 산생성(酸生成)을 촉진(促進)하는 경향(傾向)을 보였다.V또는 ara-A의 동시첨가는 GCV또는 ara-A를 단독으로 첨가했을 경우보다 단백질의 합성을 더욱 억제하였다. 이상의 실험결과로 보아 GCV와 ara-A의 동시사용은 HSV-1 혹은 ACV저항 DNA polymerase변이주인 $PAA^r5$에 대해서 상승적인 억제작용을 나타냈으며 이 효과는 virus DNA 합성 억제에 의한 것으로 생각된다. ACV저항 thymidine kinase 변이주인 $ACV^r$$IUdR^r$

  • PDF